Bin Meng [Thu, 3 Aug 2023 09:30:05 +0000 (17:30 +0800)]
bootmeth: efi: Make distro_efi_boot() static
As it is only called in bootmeth_efi.c
Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Jonas Karlman [Mon, 14 Aug 2023 00:28:26 +0000 (00:28 +0000)]
pinctrl: rockchip: Fix drive and input schmitt on RK3568
On RK3568 most pins have a configurable drive strength of level 0-5 and
some pins level 0-11. When rk3568_set_drive is called with a strength
value above 7 the drv value written to reg may overflow into the write
enable bits, resulting in a bad configuration.
This cause e.g. ethernet PHY on Radxa CM3-IO board not to work after
drive is configured according to the device tree.
Level 6-11 can be configured using a second reg for some pins, however
the drv value is reused resulting in lower 6 bits being written to reg.
Input schmitt is configured in 2-bit fields on RK3568 compared to
earlier generation and 2'b10 should be used to enable input schmitt.
Change to use regmap_update_bits with a rmask to fix the overflow issue
and closer match the linux driver. Bit shift the drv value used for the
second reg to configure drive strength level 6-11. Also write correct
values for input schmitt setting.
Fixes: 1977d746aa54 ("rockchip: rk3568: add rk3568 pinctrl driver") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Meng Li [Wed, 26 Jul 2023 02:42:35 +0000 (10:42 +0800)]
rpi: set the correct parameter for simple framebuffer node
When raspberrpi-4b platform boots up, there are 2 sets of same bootup
log displayed on HDMI monitor screen, it looks like the screen is split
into 2 parts. The root cause is that video format of u-boot is different
from kernel. The fixing "a8r8g8b8" video format is used in u-boot, but
"r5g6b5" video format from framebuffer node is used in kernel image. In
order to avoid weird display status on screen, it needs to set the correct
parameter for simple framebuffer node even if it has existed.
Jason Wessel [Wed, 26 Jul 2023 02:42:34 +0000 (10:42 +0800)]
bcm2835: Add simiple-framebuffer for use with fkms
When the fkms dtb overlay is used only the simple-framebuffer is
presented as a usable video display. So, add "simple-framebuffer"
compatible to enable video driver bcm2835.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Meng Li <Meng.Li@windriver.com>
Bin Meng [Thu, 3 Aug 2023 09:32:41 +0000 (17:32 +0800)]
video: vidconsole: Fix null dereference of ops->measure
At present vidconsole_measure() tests ops->select_font before calling
ops->measure, which would result in a null dereference when the console
driver provides no ops for measure.
Fixes: b828ed7d7929 ("console: Allow measuring the bounding box of text") Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Massimo Pegorer [Thu, 3 Aug 2023 11:08:13 +0000 (13:08 +0200)]
dts: rockchip: rk3308: Avoid warning for serial probe on prereloc
Make device tree complete and consistent for pre relocation phase. Some
nodes are missing, causing warnings to be issued on serial port probing
during pre relocation phase (uclass_get_device_by_phandle_id fails when
called by pinctrl_select_state_full: none of these failures is fatal
nor causing issues). Add to *-u-boot.dtsi all required nodes with the
'bootph-some-ram' attribute.
Signed-off-by: Massimo Pegorer <massimo.pegorer+oss@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Massimo Pegorer [Thu, 3 Aug 2023 11:08:12 +0000 (13:08 +0200)]
clk: rockchip: rk3308: Support reading UART rate and clock registers
Add support to read RK3308 registers used to configure UART clocks, and
thus to get UART rate and baudrate. This fixes clock_get_rate returning
error on serial device probing. Moreover, there is no need anymore to
use 'clock-frequency' property for UART nodes in *-u-boot.dtsi files
for all cases where UART is not inited by U-Boot proper or by SPL o by
TPL code but by a preliminary external boot phase (for Rock PI S, UART
is inited by external TPL).
Signed-off-by: Massimo Pegorer <massimo.pegorer+oss@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Massimo Pegorer [Thu, 3 Aug 2023 11:08:11 +0000 (13:08 +0200)]
clk: rockchip: rk3308: Fix ordering between masking and shifting
As per definitions of masks and shift offsets in cru_rk3308.h, values
read from registers must be first masked and then shifted. By the way,
this fix is binary invariant, because in all of fixed cases the shift
offset is zero.
Signed-off-by: Massimo Pegorer <massimo.pegorer+oss@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Massimo Pegorer [Wed, 2 Aug 2023 17:05:24 +0000 (19:05 +0200)]
rockchip: spl: Drop out of scope debug message related to uart init
Debug uart is no more inited in board_init_f function: remove this
debug message from board_init_f. If an earliest-as-possible message
after debug uart initialization is needed, enable DEBUG_UART_ANNOUNCE
Kconfig option, instead.
Signed-off-by: Massimo Pegorer <massimo.pegorer+oss@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Massimo Pegorer [Wed, 2 Aug 2023 17:05:23 +0000 (19:05 +0200)]
rockchip: spl: Drop useless call to debug_uart_init
Since commit 0dba45864b2a ("arm: Init the debug UART") function
debug_uart_init is called in crt files _main before calling
board_init_f. Therefore, there is no need to call it again
inside board_init_f implementation in arm/mach-rockchip/spl.c.
Signed-off-by: Massimo Pegorer <massimo.pegorer+oss@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Fri, 4 Aug 2023 09:34:01 +0000 (09:34 +0000)]
rockchip: rk356x-u-boot: Set max-frequency prop in sdhci node
Most board device trees for RK356x set max-frequency = <200000000> in
the sdhci node, some boards like Quartz64 do not. This result in an
error message due to sdhci driver trying to set a clock rate of 0
instead of the max-frequency value.
rockchip_sdhci_probe clk set rate fail!
Fix this by setting a common max-frequency in rk356x-u-boot.dtsi. A
patch to set default max-frequency of sdhci node in linux is planned.
Also remove the forced status = "okay" for the sdhci and sdmmc0 nodes,
boards already set correct state for these nodes.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Fri, 4 Aug 2023 09:34:00 +0000 (09:34 +0000)]
clk: rockchip: rk3568: Add dummy support for GMAC speed clocks
Pine64 Quartz64 boards DT reference SCLK_GMAC1_RGMII_SPEED in the
assigned-clocks property of the gmac1 node. This result in a ENOENT
error when driver core tries to set a parent for this clock.
The clock speed in rgmii/rmii mode is changed using clk_set_rate of the
tx_rx clock and not using clk_set_parent of the speed clock.
Add dummy support for SCLK_GMAC1_RGMII_SPEED and similar clocks to clk
driver to allow a driver for gmac node to probe.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
533ad9dc avoided an overflow but causes compilation
failure on 32bit boards (eg. veyron speedy)
this commit uses div_u64 which has a fallback codepath
for 32bit platforms
Signed-off-by: Alvaro Fernando García <alvarofernandogarcia@gmail.com> Tested-by: Simon Glass <sjg@chromium.org> # chromebook_jerry Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Tue, 11 Jul 2023 23:13:56 +0000 (23:13 +0000)]
pci: rockchip: Release resources on failing probe
The PCIe driver for RK3399 is affected by a similar issue that was fixed
for RK35xx in the commit e04b67a7f4c1 ("pci: pcie_dw_rockchip: release
resources on failing probe").
Resources are not released on failing probe, e.g. regulators may be left
enabled and the ep-gpio may be left in a requested state.
Change to use regulator_set_enable_if_allowed and disable regulators
after failure to keep regulator enable count balanced, ep-gpio is also
released on regulator failure.
Also add support for the vpcie12v-supply, remove unused include and
check return value from dev_read_addr_name.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
rockchip: rk3399: remove duplicate call to regulators_enable_boot_on
An earlier commit makes the common SPL code call
regulators_enable_boot_on and regulators_enable_boot_off before
iterating over possible boot media for U-Boot proper. There is therefore
no need to do this in the rk3399-specific code, so let's remove it.
+ Add USB host support on VisionFive2 board
+ Enable SPI flash support on VisionFive2 board
+ Enable Random Number Generator in RISC-V QEMU board
+ Display new SBI extension
+ Add SPL_ZERO_MEM_BEFORE_USE Kconfig for jh7110 L2 LIM
(Loosely-Integrated Memory)
Shengyu Qu [Wed, 9 Aug 2023 13:11:32 +0000 (21:11 +0800)]
riscv: Add SPL_ZERO_MEM_BEFORE_USE implementation
Add the actual support code for SPL_ZERO_MEM_BEFORE_USE and remove
existing Starfive JH7110's L2 LIM clean code, since existing code has
following issues:
1. Each hart (in the middle of a function call) overwriting its own
stack and other harts' stacks.
(data-race and data-corruption)
2. Lottery winner hart can be doing "board_init_f_init_reserve",
while other harts are in the middle of zeroing L2 LIM.
(data-race)
Signed-off-by: Bo Gan <ganboing@gmail.com> Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Shengyu Qu [Tue, 8 Aug 2023 13:14:36 +0000 (21:14 +0800)]
configs: starfive: Enable environment in SPI flash support
On Starfive Visionfive 2, the u-boot environment settings are saved to
on-board SPI flash. Enable relative configs by default and set offset
and size according to upstream linux dts.
Signed-off-by: Shengyu Qu <wiagn233@outlook.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Simon Glass [Mon, 31 Jul 2023 03:02:05 +0000 (21:02 -0600)]
x86: qemu-x86: Convert to text environment
Use the common include.
Drop everything from the config.h file.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:02:04 +0000 (21:02 -0600)]
x86: qemu: Add required linux/sizes.h include
These files rely on the config.h file provided this include. Add it
explictily so we can move to a text environment.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:02:03 +0000 (21:02 -0600)]
x86: efi-x86_payload: Convert to text environment
Use the common include.
Drop everything from the config.h file.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:02:02 +0000 (21:02 -0600)]
x86: efi-x86_app: Convert to text environment
Use the common include. Drop the unnecessary changes, since missing
stdio drivers will be ignored.
Drop everything from the config.h file.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:02:01 +0000 (21:02 -0600)]
x86: slimbootloader: Convert to text environment
Use the common include along with some additions.
Drop everything from the config.h file.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[Drop common env from slimbootloader.env] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:02:00 +0000 (21:02 -0600)]
x86: minnowmax: Convert to text environment
Use the common include along with some additions.
Drop everything from the config.h file.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:01:59 +0000 (21:01 -0600)]
x86: cougarcanyon2: Convert to text environment
Use the common include. The existing environment includes "vga" but that
is not valid anymore, so let it use vidconsole
Drop everything from the config.h file.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:01:58 +0000 (21:01 -0600)]
x86: cherryhill: Convert to text environment
Use the common include.
Drop everything from the config.h file.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:01:57 +0000 (21:01 -0600)]
x86: edison: Convert to text environment
Don't use the common include since Edison's environment is empty.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:01:56 +0000 (21:01 -0600)]
x86: galileo: Convert to text environment
Use the common include.
Drop everything from the config.h file.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:01:55 +0000 (21:01 -0600)]
x86: bayleybay: Convert to text environment
Use the common include.
Drop everything from the config.h file.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:01:54 +0000 (21:01 -0600)]
x86: crownbay: Convert to text environment
Use the common include.
Drop everything from the config.h file.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:01:53 +0000 (21:01 -0600)]
x86: coreboot: Convert to text environment
Use the common include and add some options specific to this board.
Drop everything from the config.h file.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:01:52 +0000 (21:01 -0600)]
x86: Add a common include for environment settings
Create a text-file version of x86-common.h which can be used by x86
boards.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:01:51 +0000 (21:01 -0600)]
x86: Drop unused distro settings
No x86 board uses distro boot, so drop these settings.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:01:50 +0000 (21:01 -0600)]
x86: Drop inclusion of ibmpc.h
This is not needed in this file anymore. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:01:49 +0000 (21:01 -0600)]
x86: edison: Drop inclusion of ibmpc.h
This should be included by files that need it, not the config.h file.
Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:01:48 +0000 (21:01 -0600)]
x86: i8254: Include required ibmpc.h header
This is needed for this file, so include it here explicitly.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:01:47 +0000 (21:01 -0600)]
x86: Drop CFG_SYS_STACK_SIZE
This is only used in one file and the value is the same for both boards
which define it. Use the fixed value of 32KB and drop the CFG. This will
allow removal of the config.h files.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:01:46 +0000 (21:01 -0600)]
env: Explain how to use #include files in text environment
Provide documentation on how to share common settings among boards.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:01:45 +0000 (21:01 -0600)]
env: Use include/env for text-environment includes
The 'environment' word is too long. We mostly use 'env' in U-Boot, so use
that as the name of the include directory too.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Mon, 31 Jul 2023 03:01:44 +0000 (21:01 -0600)]
doc: Explain how to avoid the distro-boot scripts
Now that standard boot is available, mention this in the environment
documentation.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 30 Jul 2023 17:16:06 +0000 (11:16 -0600)]
x86: Enable useful options for qemu-86
This build can be used to boot 32-bit standard-distro builds. Enable some
more options, so that all possible EFI UUIDs are decoded, we can search
memory for tables, support the full set of standard-boot features, have
full logging along with debug UART and can boot from CDROM media.
This mirrors a similar patch for qemu-x86_64
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[Drop the unknown option from defconfig] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 30 Jul 2023 17:16:05 +0000 (11:16 -0600)]
video: Add a Kconfig option for SPL video handoff
At present this feature is enabled in SPL if a bloblist is available.
Some platforms may not want to use this, so add an option to allow the
feature to be disabled.
Note that the feature unfortunately only fills in part of the
video-handoff information, so causes failures on x86 platforms. For now,
disable it there.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> # qemu-x86_64
Simon Glass [Sun, 30 Jul 2023 17:16:04 +0000 (11:16 -0600)]
x86: Correct copying of BIOS mode information
This is copying beyond the end of the destination buffer. Correct the code
by using the size of the vesa_mode_info struct. We don't need to copy the
rest of the bytes in the buffer.
This long-standing bug prevents virtio bootdevs working correctly on
qemu-x86 at present.
Fixes: 0ca2426beae ("x86: Add support for running option ROMs natively") Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> # qemu-x86_64
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> # qemu-x86_64
[Slightly modify the commit message about preliminary investigation] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 30 Jul 2023 17:15:19 +0000 (11:15 -0600)]
x86: coreboot: Update doc for CBFS access
Add an example to show how cbfs is used.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[Removed CONFIG_CMD_CBFS from defconfig files] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sun, 30 Jul 2023 17:15:14 +0000 (11:15 -0600)]
bootstd: Rename bootdev_setup_sibling_blk()
This name is a little confusing since it suggests that it sets up the
sibling block device. In fact it sets up a bootdev for it. Rename the
function to make this clearer.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Simon Glass [Sun, 30 Jul 2023 17:15:12 +0000 (11:15 -0600)]
usb: Return -ENOENT when no devices are found
When USB finds no devices it currently returns -EPERM which bootstd does
not understand. This causes other bootdevs of the same priority to be
skipped.
Fix this by returning the correct error code.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tom Rini [Wed, 9 Aug 2023 12:28:50 +0000 (08:28 -0400)]
Merge tag 'doc-2023-10-rc3' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for doc-2023-10-rc3
Documentation:
* Update examples for imx8mp_evk
* OpenOCD debugging guide for TI K3 boards
* Explain using gadget devices on TI boards
* Describe best practices for board ports
Fabio Estevam [Mon, 7 Aug 2023 13:42:46 +0000 (10:42 -0300)]
doc: imx8mp_evk: Remove unneeded export ATF_LOAD_ADDR line
Originally, exporting the ATF_LOAD_ADDR was required, but since binman has
been used to generate the flash.bin, it is no longer needed to do
such manual export.
The ATF address is now passed via binman in imx8mp-u-boot.dtsi:
Miquel Raynal [Mon, 7 Aug 2023 06:42:41 +0000 (08:42 +0200)]
doc: ti: Explain how the various gadget devices can be used
Describe the current situation wrt the handling of USB devices on AM33xx
based boards, taking the example of a common board (the Beagle Bone
Black) and explaining how the different USB gadgets can be used.
Marcel Ziswiler [Sun, 6 Aug 2023 23:44:46 +0000 (01:44 +0200)]
doc: board: toradex: fix verdin module output
Fix the Verdin module output which was missing white space for correct
rendering.
While at it also leave product links, add section author also for the
Verdin iMX8M Mini and Plus, and add a missing CROSS_COMPILE export for
the Verdin iMX8M Mini.
Jason Kacines [Thu, 3 Aug 2023 06:29:22 +0000 (01:29 -0500)]
doc: board: ti: k3: Add a guide to debugging with OpenOCD
Bootloader debug usually tends to be a bit dicey prior to DDR and
serial port getting active in the system. JTAG typically remains the
only practical debug option during the initial bringup.
OpenOCD is one of the most popular environment for providing debug
capability via a GDB compatible interface for developers to work with.
Debugging U-Boot and bootloaders on K3 platform does have a bit of
tribal knowledge that is better documented in our common platform
documentation.
Signed-off-by: Jason Kacines <j-kacines@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
To quote the author:
Adding support for Arm FF-A v1.0 (Arm Firmware Framework for Armv8-A) [A].
FF-A specifies interfaces that enable a pair of software execution
environments aka partitions to communicate with each other. A partition
could be a VM in the Normal or Secure world, an application in S-EL0, or
a Trusted OS in S-EL1.
FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed by
the PSCI driver.
=> dm tree
Class Index Probed Driver Name
-----------------------------------------------------------
...
firmware 0 [ + ] psci |-- psci
ffa 0 [ ] arm_ffa | `-- arm_ffa
...
Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).
This implementation of the specification provides support for Aarch64.
The FF-A driver uses the SMC ABIs defined by the FF-A specification to:
- Discover the presence of secure partitions (SPs) of interest
- Access an SP's service through communication protocols
(e.g: EFI MM communication protocol)
The FF-A support provides the following features:
- Being generic by design and can be used by any Arm 64-bit platform
- FF-A support can be compiled and used without EFI
- Support for SMCCCv1.2 x0-x17 registers
- Support for SMC32 calling convention
- Support for 32-bit and 64-bit FF-A direct messaging
- Support for FF-A MM communication (compatible with EFI boot time)
- Enabling FF-A and MM communication in Corstone1000 platform as a use case
- A Uclass driver providing generic FF-A methods.
- An Arm FF-A device driver providing Arm-specific methods and reusing the Uclass methods.
- A sandbox emulator for Arm FF-A, emulates the FF-A side of the Secure World and provides
FF-A ABIs inspection methods.
- An FF-A sandbox device driver for FF-A communication with the emulated Secure World.
The driver leverages the FF-A Uclass to establish FF-A communication.
- Sandbox FF-A test cases.
- A new command called armffa is provided as an example of how to access the
FF-A bus
For more details about the FF-A support please refer to [B] and refer to [C] for
how to use the armffa command.
Please find at [D] an example of the expected boot logs when enabling
FF-A support for a platform. In this example the platform is
Corstone1000. But it can be any Arm 64-bit platform.
More details:
[A]: https://developer.arm.com/documentation/den0077/latest/
[B]: doc/arch/arm64.ffa.rst
[C]: doc/usage/cmd/armffa.rst
[D]: example of boot logs when enabling FF-A
This feature allows accessing MM partitions services through
EFI MM communication protocol. MM partitions such as StandAlonneMM
or smm-gateway secure partitions which reside in secure world.
An MM shared buffer and a door bell event are used to exchange
the data.
The data is used by EFI services such as GetVariable()/SetVariable()
and copied from the communication buffer to the MM shared buffer.
The secure partition is notified about availability of data in the
MM shared buffer by an FF-A message (door bell).
On such event, MM SP can read the data and updates the MM shared
buffer with the response data.
The response data is copied back to the communication buffer and
consumed by the EFI subsystem.
MM communication protocol supports FF-A 64-bit direct messaging.
We tested the FF-A MM communication on the Corstone-1000 platform.
We ran the UEFI SCT test suite containing EFI setVariable, getVariable and
getNextVariable tests which involve FF-A MM communication and all tests
are passing with the current changes.
We made the SCT test reports (part of the ACS results) public following the
latest Corstone-1000 platform software release. Please find the test
reports at [1].
Provide armffa command showcasing the use of the U-Boot FF-A support
armffa is a command showcasing how to invoke FF-A operations.
This provides a guidance to the client developers on how to
call the FF-A bus interfaces. The command also allows to gather secure
partitions information and ping these partitions. The command is also
helpful in testing the communication with secure partitions.
For more details please refer to the command documentation [1].
A Sandbox test is provided for the armffa command.
[1]: doc/usage/cmd/armffa.rst
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Emulate Secure World's FF-A ABIs and allow testing U-Boot FF-A support
Features of the sandbox FF-A support:
- Introduce an FF-A emulator
- Introduce an FF-A device driver for FF-A comms with emulated Secure World
- Provides test methods allowing to read the status of the inspected ABIs
The sandbox FF-A emulator supports only 64-bit direct messaging.
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0
The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.
This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.
The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.
All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.
Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.
FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.
Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).
The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.
The driver exports its operations to be used by upper layers.
projects / u-boot.git / log