Jan Luebbe [Wed, 13 May 2020 10:26:24 +0000 (12:26 +0200)]
lib: rsa: avoid overriding the object name when already specified
If "object=" is specified in "keydir" when using the pkcs11 engine do
not append another "object=<key-name-hint>". This makes it possible to
use object names other than the key name hint. These two string
identifiers are not necessarily equal.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Bastian Krause <bst@pengutronix.de> Reviewed-by: George McCollister <george.mccollister@gmail.com>
Samuel Holland [Thu, 7 May 2020 23:08:10 +0000 (18:08 -0500)]
spl: Always define preloader_console_init
A large number of boards call preloader_console_init unconditionally.
Currently, they fail to build with CONFIG_SPL_SERIAL=n, because the
function is undefined in that case. To fix the build, always define
preloader_console_init, but make it no-op when CONFIG_SPL_SERIAL=n.
For the few boards that did check for CONFIG_SPL_SERIAL before calling
preloader_console_init, remove the checks, since the function can now
be called unconditionally.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Petr Borsodi [Thu, 7 May 2020 10:25:56 +0000 (12:25 +0200)]
JFFS2: Add useful fields into lists
The inode list uses version and ino, the dirent list uses version and pino.
This information is collected during scanning, reducing accesses to flash
and significantly speeding up ls and read.
Petr Borsodi [Thu, 7 May 2020 10:25:55 +0000 (12:25 +0200)]
JFFS2: Process obsolete nodes as well as accurate ones
Obsolete nodes (ie. without the JFFS2_NODE_ACCURATE flag) were ignored
because they had seemingly invalid crc. This could lead to finding
the phantom node header in obsolete node data.
Trevor Woerner [Wed, 6 May 2020 12:02:37 +0000 (08:02 -0400)]
arch/arm/Makefile: sort machine names
The comment immediately above the block of machine directory names implored
users to keep the macro names sorted, but, alas, this is no longer the case.
Put the list of machine directory names back in alphanumerical order by
CONFIG_* macro name, as the comment asks. Sort all the symbols as though they
all followed the convention of having the string "ARCH_" in the middle of
their definitions.
Trevor Woerner [Wed, 6 May 2020 12:02:36 +0000 (08:02 -0400)]
arm: lpc32xx: move SoC to mach-lpc32xx
Following the example of most other SoCs in arch/$(ARCH)/cpu/$(CPU)/$(SOC)
move the lpc32xx code from arch/arm/cpu/arm926ejs/lpc32xx to
arch/arm/mach-lpc32xx.
Following the checklist from
commit 01f14456306c ("ARM: prepare for moving SoC sources into mach-*"):
[1] move files from arch/arm/cpu/arm926ejs/lpc32xx to arch/arm/mach-lpx32xx
[2] add machine entry to arch/arm/Makefile
[3] remove "obj-y += ..." from arch/arm/cpu/arm926ejs/Makefile
[4] fix the Kconfig file path in arch/arm/Kconfig
[5] (no MAINTAINERS update)
Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Jonathan Gray [Fri, 15 May 2020 12:20:34 +0000 (22:20 +1000)]
rsa: don't use malloc.h in rsa-sign.c
stdlib.h is the header for malloc since at least c89/c90.
There is no system malloc.h on OpenBSD and trying to use malloc.h here
falls back to the U-Boot malloc.h breaking the build of qemu_arm64.
Fixes: 336d4615f8 ("dm: core: Create a new header file for 'compat' features") Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Simon Glass [Wed, 6 May 2020 14:03:56 +0000 (08:03 -0600)]
lib: Allow MD5 to be enabled in SPL
At present the MD5 option cannot be enabled by board configs since it has
no Kconfig name. It is generally enabled, so long as FIT support is
present. But not all boards use FIT, particularly in SPL
Fix this and add an option for SPL as well. This allows board code to call
md5() even if FIT support is not enabled.
Jan Kiszka [Mon, 4 May 2020 12:38:31 +0000 (14:38 +0200)]
kbuild: spl: Add shrunk arch-dtbs to targets list
This avoids needless rebuilding.
Fixes: 2f57c95100f2 ("spl: dm: Make it possible for the SPL to pick its own DTB from a FIT") CC: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Jan Kiszka [Mon, 4 May 2020 12:38:30 +0000 (14:38 +0200)]
kbuild: spl: Fix parallel build
The dts dir must exists when running this rule.
That missing dependency broke e.g. "make -j" for the am65x targets.
Fixes: 2f57c95100f2 ("spl: dm: Make it possible for the SPL to pick its own DTB from a FIT") CC: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Tom Rini [Thu, 14 May 2020 12:44:06 +0000 (08:44 -0400)]
Merge tag 'u-boot-stm32-20200514' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm
- stm32mp1: migrate MTD and DFU configuration in Kconfig
- stm32mp1: add command stm32prog
- stm32mp1: several board and arch updates
- stm32mp1: activate data cache in SPL and before relocation
- Many improvment for AV96 board and DHCOR SoM
(add new defconfig, DDR3 coding on DHCOR SoM, split between board and SOM
Synchronize DDR setttings on DH SoMs, setting for I2C EEPROM)
- clk: stm32mp1: fix CK_MPU calculation
- DT alignment of stm32mp1 device tree with Linux 5.7-rc2
Tom Rini [Thu, 14 May 2020 12:43:33 +0000 (08:43 -0400)]
Merge tag 'rpi-next-2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi
- fix phy configuration for RPi4's bcmgenet
- sync RPi4's env size with other RPi configs
- add kconfig option to reserver more pages in the EFI mem map
- add support for SDMA which is used by RPi4
- fix corner case boot bug for RPi3 32-bit
Patrick Delaunay [Thu, 30 Apr 2020 13:52:46 +0000 (15:52 +0200)]
ARM: dts: stm32mp1: DT alignment with Linux 5.7-rc2
DT alignment with Linux 5.7-rc2, including the kernel commits
431c89e6f323 ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1 ED1/EV1 boards 79e965053872 ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boards 877db62ea516 ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards 7519e95ba5f8 ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boards f68e2dbc591a ARM: dts: stm32: Rename stmfx joystick pins on stm32mp157c-ev1 d6210da4f8bf ARM: dts: stm32: add cpu clock-frequency property on stm32mp15x b65b6fc56925 ARM: dts: stm32: add wakeup-source in all I2C nodes of stm32mp157c 1c1cf5996cfb ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp157c-ed1 bef15fc0fad9 ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1 b7fc0a87b9ac ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx a5e557655285 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK boards 8bc631b650a6 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-ed1 fccd6a577bb3 ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1 board cc775a83db65 ARM: dts: stm32: add resets property on all DMA nodes on stm32mp151 c5fae093511b ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1 9879e2165758 ARM: dts: stm32: add USB OTG pinctrl to stm32mp15 82ac8a81f985 ARM: dts: stm32: add USB OTG full support on stm32mp151 8714b26e2863 ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic node a7959919709e ARM: dts: stm32: Add UART8 pins A pinmux entry on stm32mp1 4d7c53a684da ARM: dts: stm32: Add USART3 pins A pinmux entry on stm32mp1 80ab128332ee ARM: dts: stm32: Add SAI2A pins B pinmux entry on stm32mp1 ab7f98c0c546 ARM: dts: stm32: Add Ethernet0 RMII pins A pinmux entry on stm32mp1
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
When the CK_MPU used PLL1_MPUDIV, the current rate is
wrong. The clock must use stm32mp1_mpu_div as a shift
value. Fix the check value used to enter PLL_MPUDIV.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Patrick Delaunay [Thu, 30 Apr 2020 07:52:13 +0000 (09:52 +0200)]
mmc: stm32_sdmmc2: change the displayed config name
Change the mmc displayed name in U-Boot for stm32_sdmmc2 driver to
“STM32 SD/MMC”.
This stm32_sdmmc2 driver is for version 2 of the ST HW IP SDMMC but the
displayed name "STM32 SDMMC2" is confusing for user, between the
instance of SDMMC and the device identifier of MMC.
Patrick Delaunay [Thu, 30 Apr 2020 14:30:21 +0000 (16:30 +0200)]
arm: stm32mp: activate data cache on DDR in SPL
Activate cache on DDR to improve the accesses to DDR used by SPL:
- CONFIG_SPL_BSS_START_ADDR
- CONFIG_SYS_SPL_MALLOC_START
Cache is configured only when DDR is fully initialized,
to avoid speculative access and issue in get_ram_size().
Data cache is deactivated at the end of SPL, to flush the data cache
and the TLB.
Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Patrick Delaunay [Thu, 30 Apr 2020 14:30:20 +0000 (16:30 +0200)]
arm: stm32mp: activate data cache in SPL and before relocation
Activate the data cache in SPL and in U-Boot before relocation.
In arch_cpu_init(), the function early_enable_caches() sets the early
TLB, early_tlb[] located .init section, and set cacheable:
- for SPL, all the SYSRAM
- for U-Boot, all the DDR
After relocation, the function enable_caches() (called by board_r)
reconfigures the MMU with new TLB location (reserved in
board_f.c::reserve_mmu) and re-enable the data cache.
This patch allows to reduce the execution time, particularly
- for the device tree parsing in U-Boot pre-reloc stage
(dm_extended_scan_fd =>dm_scan_fdt)
- in I2C timing computation in SPL (stm32_i2c_choose_solution())
For example, the result on STM32MP157C-DK2 board is:
1,6s gain for trusted boot chain with TF-A
2,2s gain for basic boot chain with SPL
For information, as TLB is added in .data section, the binary size
increased and the SPL load time by ROM code increased (30ms on DK2).
But early malloc can't be used for TLB because arch_cpu_init()
is executed before the early poll initialization done in spl_common_init()
called by spl_early_init() So it too late for this use case.
And if I initialize the MMU and the cache after this function it is
too late, as dm_init_and_scan and fdt parsing is also called in
spl_common_init().
And .BSS can be used in board_init_f(): only stack and global can use
before BSS init done in board_init_r().
So .data is the better solution without hardcoded location but if you
have size issue for SPL you can deactivate cache for SPL only
(with CONFIG_SPL_SYS_DCACHE_OFF).
Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Marek Vasut [Mon, 27 Apr 2020 10:26:42 +0000 (12:26 +0200)]
ARM: stm32: Define I2C EEPROM bus and address on DHCOM
Define I2C EEPROM bus and address, so that the 'eeprom' command uses
the correct ones and does not generate the following error:
eeprom_rw_block: Cannot find udev for a bus 0
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Marek Vasut [Wed, 29 Apr 2020 13:08:38 +0000 (15:08 +0200)]
ARM: dts: stm32: Synchronize DDR setttings on DH SoMs
Add custom DDR DRAM settings for the DHCOR and DHCOM SoMs and put them
into use by the board file instead of the default ones. These new DRAM
settings are a better fit for the SoMs.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Marek Vasut [Mon, 27 Apr 2020 11:16:02 +0000 (13:16 +0200)]
ARM: dts: stm32: Fix AV96 and DHCOR split
The commit 132e5b68986d ("ARM: dts: stm32: Split AV96 into DHCOR SoM
and AV96 board") was not applied correctly and in full, and omitted
an important split of the SoM into 3V3 and 1V8 options. The Avenger96
board is based on the 1V8 IO option of the DHCOR SoM, however this is
an optional modification of the 3V3 IO DHCOR SoM with extra on-SoM
regulator to cater for the 96boards 1V8 IO requirements.
Reinstate the split between the 1V8 and 3V3 IO variants.
Fixes: 132e5b68986d ("ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Need Realtek driver to manage in RTL8211F the configuration of the LED.
Initialize LCR (LED Control Register) to configure green LED for Link,
yellow LED for Active
Patrick Delaunay [Wed, 22 Apr 2020 12:29:17 +0000 (14:29 +0200)]
gpio: stm32: support gpio ops in SPL
The GPIO support is needed in SPL to managed the SD cart detect
used on stm32mp157c-ev1 and dk2 board.
So this patch activates the associated code in stm32_gpio.c.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Patrick Delaunay [Wed, 22 Apr 2020 12:29:14 +0000 (14:29 +0200)]
board: stm32mp1: set environment variable fdtfile
For booting Linux in the generic distro mechanism and support of
FDTDIR in extlinux.conf , cmd/pxe.c retrieves the FDT file name
from "fdtfile" environment variable.
Dynamically build this variable with compatible of STMicroelectronics
boards.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
board: stm32mp1: Keep error led ON in case of low power detection
Since commit commit dd2810851eb1 ("stm32mp1: board: support of
error led on ed1/ev1 board") the attended behavior was no more
respected in case of low power source detection on DK2.
The expected behavior is either the error LED keeps blinking for ever,
or blinks 2 or 3 times and must stay ON.
Patrick Delaunay [Wed, 18 Mar 2020 08:24:56 +0000 (09:24 +0100)]
stm32mp: stm32prog: add support of ssbl copy
For reliability of boot from NAND/SPI-NAND (with read-disturb issue)
the SSBL can be present several time, when it is indicated in the
flashlayout with "Binary(X)".
The received binary is copied X times by U-Boot on the target.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Patrick Delaunay [Wed, 18 Mar 2020 08:24:55 +0000 (09:24 +0100)]
stm32mp: stm32prog: adapt the MTD partitions
Dynamically adapt the MTD partitions in NOR/NAND/SPI-NAND when stm32prog
command detects in the parsed flash layout files:
- a fsbl partition in NOR.
- a tee partition in NOR/NAND/SPI-NAND
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Patrick Delaunay [Wed, 18 Mar 2020 08:24:52 +0000 (09:24 +0100)]
stm32mp: stm32prog: add support of boot partition for eMMC device
Add support of eMMC device boot partition with
part_id = -1 for offset="boot1"
or = -2 for offset="boot2"
The stm32prog command configures the MMC DFU backend with "mmcpart"
and configure the eMMC (command "mmc bootbus" and "mmc partconf")
when the update is done.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Patrick Delaunay [Wed, 18 Mar 2020 08:24:50 +0000 (09:24 +0100)]
stm32mp: stm32prog: add flash layout parsing
Build the list of device and of partition with
a tab separated value file with a stm32 header: the FlashLayout.tsv
(https://wiki.st.com/stm32mpu/wiki/STM32CubeProgrammer_flashlayout)
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Patrick Delaunay [Wed, 18 Mar 2020 08:24:49 +0000 (09:24 +0100)]
stm32mp: add the command stm32prog
Add a specific command stm32prog for STM32MP soc family
witch allows to program the boot devices with the tool
STM32CubeProgrammer (http://www.st.com/STM32CubeProg).
This command uses the same UART STM32 protocol than MCU
STM32 with or USB with DFU protocol v1.1 (ithe MCU ST
extension are no supported).
The executed actions are based on a tab separated value file
with a stm32 header, the FlashLayout file
(https://wiki.st.com/stm32mpu/wiki/STM32CubeProgrammer_flashlayout).
This file is parsed by the U-Boot command to:
- initialize the devices
- create the partition table on each device
- initialize the DFU backend to access to not volatile memory
(NOR/NAND/SD/eMMC) or to virtual device (OTP/PMIC)
Up to STM32PROG_MAX_DEV (5) devices can be updated with a FlashLayout.
The communication between U-Boot and STM32CubeProgrammer is done with
the specific alternate configuration (see "AN5275: USB DFU/USART protocols
used in STM32MP1 Series bootloaders" for details).
The command stm32prog is executed when a boot from USB is detected
(selected with bootpins) and we can program the boot devices with
a simple command (on Windows or Linux):
PC $> STM32_Programmer_CLI -c port=usb1 -w flaslayout.tsv
1/ the ROM code loads TF-A in embedded RAM (DFU or uart)
2/ TF-A loads flashlayout file and U-Boot in DDR (DFU or uart)
3/ U-Boot executes the stm32prog command (DFU or uart)
Patrick Delaunay [Wed, 18 Mar 2020 08:22:53 +0000 (09:22 +0100)]
board: stm32mp1: adapt MTD partition for BOOT from NOR or NAND
Dynamically adapt the MTD partitions in NAND and SPI-NAND when boot from
NOR or NAND/SPI-NAND is detected.
This patch avoids to define the save MTD partition name for NOR and NAND
devices and issue with latest kernel: only the needed MTD partitions
are defined.
For boot from NOR
1/ bootloader (TF-A, U-Boot and OP-TE) in NOR
2/ one large UBI partition in NAND
For boot from NAND
1/ bootloader (TF-A, U-Boot and OP-TE) in MTD raw partition
2/ one large UBI partition
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Patrick Delaunay [Wed, 18 Mar 2020 08:22:48 +0000 (09:22 +0100)]
board: stm32mp1: reserve memory for OP-TEE in device tree
Add reserve memory for OP-TEE in U-Boot and in kernel device tree:
- no more reduce the DDR size in "memory" node:
CONFIG_SYS_MEM_TOP_HIDE is no more used
- U-Boot device-tree defines the needed "reserved-memory" for OP-TEE
and U-Boot should not use this reserved memory: board_get_usable_ram_top
use lmb lib to found the first free region, the not reserved
memory, enough to relocate U-Boot: the needed size of U-Boot
is estimated with gd->mon_len + CONFIG_SYS_MALLOC_LEN.
- the optee node ("optee@...": firmware with compatible "linaro,optee-tz")
and the associated "reserved-memory" are deactivated in kernel device
tree when OP-TEE is not detected by U-Boot to prevent kernel issue
(memory is reserved but not used, optee driver probe failed).
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Patrick Delaunay [Wed, 18 Mar 2020 08:22:46 +0000 (09:22 +0100)]
stm32mp1: dynamically build DFU_ALT_INFO
This patch reduces the stm32mp1 environment size and
builds dynamically the DFU board configuration with gpt
and mtd partitions and information from defconfig
(CONFIG_DFU_ALT_RAM0).
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Patrick Delaunay [Wed, 18 Mar 2020 08:22:45 +0000 (09:22 +0100)]
board: stm32mp1: move set_dfu_alt_info in st common directory
Move the stm32mp1 common code set_dfu_alt_info() in common directory,
this patch reduce the maintenance effort on this generic part (not board
dependent).
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Patrick Delaunay [Wed, 18 Mar 2020 08:22:44 +0000 (09:22 +0100)]
board: stm32mp1: move board_get_mtdparts in st common directory
Move the stm32mp1 common code board_get_mtdparts() in common directory,
this patch reduce the maintenance effort on this generic part (not board
dependent).
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Marek Vasut [Wed, 22 Apr 2020 11:18:14 +0000 (13:18 +0200)]
ARM: stm32: Implement DDR3 coding on DHCOR SoM
The DHCOR board does exist in multiple variants with different DDR3
DRAM sizes. To cater for all of them, implement DDR3 code handling.
There are two GPIOs which code the DRAM size populated on the SoM,
read them out and use the value to pick the correct DDR3 config.
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com>
Marek Vasut [Wed, 22 Apr 2020 11:18:13 +0000 (13:18 +0200)]
ARM: dts: stm32: Rework DDR DT inclusion
Adjust the DDR configuration dtsi such that they only generate the
DRAM configuration node, the DDR controller node is moved into the
stm32mp157-u-boot.dtsi itself. This permits including multiple DDR
configuration dtsi files in board DT.
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com>
Marek Vasut [Wed, 22 Apr 2020 11:18:12 +0000 (13:18 +0200)]
ram: stm32mp1: Add support for multiple configs
Add support for multiple DRAM configuration subnodes, while retaining
the support for a single flat DRAM configuration node. This is useful
on systems which can be manufactured in multiple configurations and
where the DRAM configuration can be determined at runtime.
The code is augmented by a function which can be overridden on board
level, allowing a match on the configuration node name, very much like
the fitImage configuration node name matching works. The default match
is on the single top-level DRAM configuration, if matching on subnodes
is required, then this board_stm32mp1_ddr_config_name_match() must be
overridden.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com>
Marek Vasut [Wed, 22 Apr 2020 11:18:11 +0000 (13:18 +0200)]
ARM: stm32: Implement board coding on AV96
The AV96 board does exist in multiple variants. To cater for all of
them, implement board code handling. There are two GPIOs which code
the type of the board, read them out and use the value to pick the
correct device tree from an fitImage.
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com>
Change-Id: Iddb330b9a66500495885457cbe17edc0eacaaf43
Marek Vasut [Wed, 22 Apr 2020 11:18:10 +0000 (13:18 +0200)]
ARM: stm32: Add board_early_init_f() to SPL
Add weak implementation of board_early_init_f() hook into the
STM32MP1 SPL. This can be used to read out e.g. configuration
straps before initializing the DRAM.
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com>
Tom Rini [Wed, 13 May 2020 19:03:16 +0000 (15:03 -0400)]
Merge tag 'arc-fixes-for-2020.07-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-arc
Here we improve clock support for recently introduced HSDK-4xD
board as well as finally enable external reset for the USB controller,
which is needed to recover USB functionality after "usb reset".
Eugeniy Paltsev [Thu, 7 May 2020 19:20:10 +0000 (22:20 +0300)]
CLK: ARC: HSDK: add separate clock map for HSDK-4xD
HSDK and HSDK-4xD clock trees are slightly different.
commit 1dfb2ec0d7fb ("ARC: HSDK: CGU: add support for timer clock")
introduce regression for HSDK board cause crash when setting
tunnel clock. Fix that.
Fixes: 1dfb2ec0d7fb ("ARC: HSDK: CGU: add support for timer clock") Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Eugeniy Paltsev [Thu, 7 May 2020 13:59:54 +0000 (16:59 +0300)]
CLK: ARC: HSDK: avoid code duplication
hsdk_axi_clk_cfg and hsdk_tun_clk_cfg clock divider structures
and functions for their processing are almost the same so
merge them to avoid code duplication.
Kyle Evans [Wed, 26 Feb 2020 21:39:10 +0000 (15:39 -0600)]
rpi: use the newly-added RPI_EFI_NR_SPIN_PAGES
Some systems may use a slightly larger stub to do PSCI for booting the RPi
family. The number of pages has been made configurable so that operating
systems building U-Boot for use in these kinds of environments can reserve
more memory in the EFI memory map.
Kyle Evans [Wed, 26 Feb 2020 21:37:13 +0000 (15:37 -0600)]
rpi: Kconfig option for initial page reservation
While the nearly-universal default for the Raspberry Pi family is to use
spin tables and the spin table implementation provided by the Raspberry Pi
Foundation, FreeBSD and others may use a PSCI implementation instead.
Accommodate these setups by allowing them to configure for more than one
page to be reserved in the initial reservation. The default reservation
remains as one page.
projects / u-boot.git / log