This was regressed by the following commit and is required to build with
additional configs enabled.
Fixes: 14439cd71c1a ("configs: k3: make consistent bootcmd across all k3 socs") Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Tested-by: Nikhil M Jain <n-jain1@ti.com>
Jan Kiszka [Thu, 27 Jul 2023 04:34:54 +0000 (06:34 +0200)]
boards: siemens: iot2050: Unify PG1 and PG2/M.2 configurations again
This avoids having to maintain to defconfigs that are 99% equivalent.
The approach is to use binman to generate two flash images,
flash-pg1.bin and flash-pg2.bin. With the help of a template dtsi, we
can avoid duplicating the common binman image definitions.
Suggested-by: Andrew Davis <afd@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Jan Kiszka [Thu, 27 Jul 2023 04:34:53 +0000 (06:34 +0200)]
iot2050: Use binman in signing script
The underlying issue was fixed in the meantime. Also signing the U-Boot
proper fit image now works. Just supporting custom cert templates
remains a todo.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Jan Kiszka [Thu, 27 Jul 2023 04:34:52 +0000 (06:34 +0200)]
boards: siemens: iot2050: Fix boot configuration
The common env bits now come via ti_armv7_common.env, include it.
Furthermore restore the board-specific boot targets and their ordering
that is now enforced k3-wide differently. Finally, enable
CONFIG_LEGACY_IMAGE_FORMAT explicitly which got lost while turning
FIT_SIGNATURE on by default for k3 devices.
Fixes: 53873974 ("include: armv7: Enable distroboot across all configs") Fixes: 4ae1a247 ("env: Make common bootcmd across all k3 devices") Fixes: 86fab110 ("Kconfig: Enable FIT_SIGNATURE if ARM64") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Update the am62 and am625 device-trees from linux v6.5-rc1. This needed
the following tweaks to the u-boot specific dtsi as well:
- Switch tick-timer to the main_timer as it's now defined in the main dtsi
- Secure proxies are defined in SoC dtsi
- Drop duplicate nodes - u-boot.dtsi is includes in r5-sk, no need for
either the definitions from main.dtsi OR duplication from u-boot.dtsi
Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Maxime Ripard <mripard@kernel.org> Tested-by: Maxime Ripard <mripard@kernel.org> Cc: Francesco Dolcini <francesco@dolcini.it> Cc: Sjoerd Simons <sjoerd@collabora.com> Cc: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Nishanth Menon <nm@ti.com>
Maxime Ripard [Mon, 24 Jul 2023 13:57:30 +0000 (15:57 +0200)]
net: ti: am65-cpsw-nuss: Enforce pinctrl state on the MDIO child node
The binding represents the MDIO controller as a child device tree
node of the MAC device tree node.
The U-Boot driver mostly ignores that child device tree node and just
hardcodes the resources it uses to support both the MAC and MDIO in a
single driver.
However, some resources like pinctrl muxing states are thus ignored.
This has been a problem with some device trees that will put some
pinctrl states on the MDIO device tree node, like the SK-AM62 Device
Tree does.
Let's rework the driver a bit to create a dummy MDIO driver that we will
then get during our initialization to force the core to select the right
muxing.
Signed-off-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Acked-by: Roger Quadros <rogerq@kernel.org> Acked-by: Nishanth Menon <nm@ti.com>
phy: adin: add readext and writeext support for mdio cmd
The adin phy has extended registers that can be accessed using
adin_ext_read and adin_ext_write. These registers can be read directly
using the mdio command using readext and writext. For example:
=> mdio rx ethernet@428a0000 0xff23
Reading from bus ethernet@428a0000
PHY at address 0:
65315 - 0xe01
Signed-off-by: Nate Drude <nate.d@variscite.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Ehsan Mohandesi [Thu, 18 May 2023 18:24:38 +0000 (11:24 -0700)]
net: ipv6: router advertisement message length should be within limits
The argument len passed to function process_ra is the length of the IPv6
router advertisement message and needs to be between 0 and MTU because
it is assigned to remaining_option_len and used as a loop variable.
Richard Habeeb [Mon, 24 Jul 2023 19:45:25 +0000 (15:45 -0400)]
usb: xhci: Fix double free on failure
drivers/core/device.c will call `device_free()` after xhci_register
already frees the private device data. This can cause a crash later
during the boot process, observed on aarch64 RPi4b as a synchronous
exception. All callers of xhci_register use priv_auto, so this won't
lead to memory leaks.
Signed-off-by: Richard Habeeb <richard.habeeb@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Vasut [Thu, 20 Jul 2023 12:50:42 +0000 (14:50 +0200)]
Makefile: Use sort shortopts
POSIX does not defined longopts for sort, use shortops
for even more compatibility.
Fixes: cc5a490cf465 ("Makefile: Sort u-boot-initial-env output") Reported-by: Milan P. Stanić <mps@arvanta.net> Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Mark Kettenis <kettenis@openbsd.org> Tested-by: Milan P. Stanić <mps@arvanta.net>
Tom Rini [Tue, 18 Jul 2023 23:33:34 +0000 (19:33 -0400)]
MAINTAINERS: Add some missing directories or files
In a few cases we have MAINTAINERS entries that are missing obvious
paths or files. Typically this means a board directory that did not list
itself, but in a few cases we have a Kconfig file or similar.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Tue, 18 Jul 2023 23:33:33 +0000 (19:33 -0400)]
MAINTAINERS: Deal with '+' in paths
The listed paths are allowed to contain wildcards. This includes the
'+' character which we have as a literal part of the path in a few
cases. Escape the '+' here so that files are matched.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Tue, 18 Jul 2023 23:33:32 +0000 (19:33 -0400)]
MAINTAINERS: Fix path typos and similar
We have a number of cases where the in-tree path of files and where
they presumably were when the first version of a patch were posted
differ slightly. Correct these to point at where the files are now.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Since commit 56670d6fb83f ("disk: part: use common api to lookup part
driver") part_get_info_by_name_type() ignores the part_type parameter
used to restrict the partition table type.
omap_mmc_get_part_size() and part_get_info_by_name() are the only
consumers.
omap_mmc_get_part_size() calls with part_type = PART_TYPE_EFI because at
the time of implementation a speed up could be gained by passing the
partition table type. After 5 years experience without this restriction
it looks safe to keep it that way.
part_get_info_by_name() uses PART_TYPE_ALL.
Move the logic of part_get_info_by_name_type() to part_get_info_by_name()
and replace the function in omap_mmc_get_part_size().
Fixes: 56670d6fb83f ("disk: part: use common api to lookup part driver") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Sat, 15 Jul 2023 15:02:24 +0000 (11:02 -0400)]
.mailmap: Correct entries for Masahiro Yamada
His entries had the correct email address listed last rather than first,
correct this.
Fixes: 4fa4227cdd14 (".mailmap: Record all address for main U-Boot contributor") Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Michal Simek <michal.simek@amd.com>
Michal Simek [Thu, 13 Jul 2023 14:35:24 +0000 (16:35 +0200)]
fwu: Allow code to properly decode trial state
Current code after capsule update (mtd write) is not changing active_index
in mdata to previous_active_index.
On the reboot this is shown but showing message
"Boot idx 1 is not matching active idx 0, changing active_idx"
which is changing active_idx and writing mdata to flash.
But when this message is visible it is not checking which state that images
are. If they have acceptance bit setup to yes everything is fine and valid
images are booted (doesn't mean the latest one).
But if acceptance bit is no and images are in trial state in_trial variable
is never setup. Which means that from new flashed image stable image can be
rewritten because in_trial is not setup properly.
Signed-off-by: Michal Simek <michal.simek@amd.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Chris Packham [Tue, 11 Jul 2023 23:30:44 +0000 (11:30 +1200)]
drivers: rtc: max313xx: provide read8/write8
In some designs the MAX313xx RTC may need calibration to cope with
oscillator inaccuracies. Provide read8/write8 ops so that the registers
can be accessed. Because the driver covers a range of MAX313xx variants
no attempt is made to ensure the register is valid.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Philippe Reynes [Fri, 23 Jun 2023 16:36:42 +0000 (18:36 +0200)]
drivers: led: bcm6858: do not use null label to find the top
This driver considers that a node with an empty label is the top.
But the led class has changed, if a label is not provided for a led,
the label is filed with the node name. So we update this driver
to use a wrapper to manage the top led node.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Nishanth Menon [Tue, 20 Jun 2023 18:17:09 +0000 (13:17 -0500)]
mailbox: k3-sec-proxy: Fill non-message tx data fields with 0x0
Sec proxy data buffer is 60 bytes with the last of the registers
indicating transmission completion. This however poses a bit of a
challenge.
The backing memory for sec_proxy is regular memory, and all sec proxy
does is to trigger a burst of all 60 bytes of data over to the target
thread backing ring accelerator. It doesn't do a memory scrub when
it moves data out in the burst. When we transmit multiple messages,
remnants of previous message is also transmitted which results in
some random data being set in TISCI fields of messages that have been
expanded forward.
The entire concept of backward compatibility hinges on the fact that
the unused message fields remain 0x0 allowing for 0x0 value to be
specially considered when backward compatibility of message extension
is done.
So, instead of just writing the completion register, we continue
to fill the message buffer up with 0x0 (note: for partial message
involving completion, we already do this).
This allows us to scale and introduce ABI changes back also work with
other boot stages that may have left data in the internal memory.
Simon Glass [Tue, 25 Jul 2023 14:13:22 +0000 (08:13 -0600)]
buildman: Specify the output directory in tests
The default output directory is generally '../' in tests so we end up
trying to create '../.bm-work'. This does not work with azure, so update
these tests to use the temporary directory instead.
Tom Rini [Mon, 24 Jul 2023 22:58:22 +0000 (18:58 -0400)]
Merge branch '2023-07-24-introduce-FF-A-suppport'
To quote the author:
Adding support for Arm FF-A v1.0 (Arm Firmware Framework for Armv8-A) [A].
FF-A specifies interfaces that enable a pair of software execution
environments aka partitions to communicate with each other. A partition
could be a VM in the Normal or Secure world, an application in S-EL0, or
a Trusted OS in S-EL1.
FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.
=> dm tree
Class Index Probed Driver Name
-----------------------------------------------------------
...
firmware 0 [ + ] psci |-- psci
ffa 0 [ ] arm_ffa | `-- arm_ffa
...
Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).
This implementation of the specification provides support for Aarch64.
The FF-A driver uses the SMC ABIs defined by the FF-A specification to:
- Discover the presence of secure partitions (SPs) of interest
- Access an SP's service through communication protocols
(e.g: EFI MM communication protocol)
The FF-A support provides the following features:
- Being generic by design and can be used by any Arm 64-bit platform
- FF-A support can be compiled and used without EFI
- Support for SMCCCv1.2 x0-x17 registers
- Support for SMC32 calling convention
- Support for 32-bit and 64-bit FF-A direct messaging
- Support for FF-A MM communication (compatible with EFI boot time)
- Enabling FF-A and MM communication in Corstone1000 platform as a use case
- A Uclass driver providing generic FF-A methods.
- An Arm FF-A device driver providing Arm-specific methods and
reusing the Uclass methods.
- A sandbox emulator for Arm FF-A, emulates the FF-A side of the
Secure World and provides FF-A ABIs inspection methods.
- An FF-A sandbox device driver for FF-A communication with the
emulated Secure World. The driver leverages the FF-A Uclass to
establish FF-A communication.
- Sandbox FF-A test cases.
- A new command called armffa is provided as an example of how to
access the FF-A bus
For more details about the FF-A support please refer to [B] and refer to [C] for
how to use the armffa command.
Please find at [D] an example of the expected boot logs when enabling
FF-A support for a platform. In this example the platform is
Corstone1000. But it can be any Arm 64-bit platform.
[A]: https://developer.arm.com/documentation/den0077/latest/
[B]: doc/arch/arm64.ffa.rst
[C]: doc/usage/cmd/armffa.rst
[D]: example of boot logs when enabling FF-A
This feature allows accessing MM partitions services through
EFI MM communication protocol. MM partitions such as StandAlonneMM
or smm-gateway secure partitions which reside in secure world.
An MM shared buffer and a door bell event are used to exchange
the data.
The data is used by EFI services such as GetVariable()/SetVariable()
and copied from the communication buffer to the MM shared buffer.
The secure partition is notified about availability of data in the
MM shared buffer by an FF-A message (door bell).
On such event, MM SP can read the data and updates the MM shared
buffer with the response data.
The response data is copied back to the communication buffer and
consumed by the EFI subsystem.
MM communication protocol supports FF-A 64-bit direct messaging.
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Tested-by: Gowtham Suresh Kumar <gowtham.sureshkumar@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jens Wiklander <jens.wiklander@linaro.org>
Emulate Secure World's FF-A ABIs and allow testing U-Boot FF-A support
Features of the sandbox FF-A support:
- Introduce an FF-A emulator
- Introduce an FF-A device driver for FF-A comms with emulated Secure World
- Provides test methods allowing to read the status of the inspected ABIs
The sandbox FF-A emulator supports only 64-bit direct messaging.
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Provide armffa command showcasing the use of the U-Boot FF-A support
armffa is a command showcasing how to invoke FF-A operations.
This provides a guidance to the client developers on how to
call the FF-A bus interfaces. The command also allows to gather secure
partitions information and ping these partitions. The command is also
helpful in testing the communication with secure partitions.
For more details please refer to the command documentation [1].
[1]: doc/usage/cmd/armffa.rst
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Add Arm FF-A support implementing Arm Firmware Framework for Armv8-A v1.0
The Firmware Framework for Arm A-profile processors (FF-A v1.0) [1]
describes interfaces (ABIs) that standardize communication
between the Secure World and Normal World leveraging TrustZone
technology.
This driver uses 64-bit registers as per SMCCCv1.2 spec and comes
on top of the SMCCC layer. The driver provides the FF-A ABIs needed for
querying the FF-A framework from the secure world.
The driver uses SMC32 calling convention which means using the first
32-bit data of the Xn registers.
All supported ABIs come with their 32-bit version except FFA_RXTX_MAP
which has 64-bit version supported.
Both 32-bit and 64-bit direct messaging are supported which allows both
32-bit and 64-bit clients to use the FF-A bus.
FF-A is a discoverable bus and similar to architecture features.
FF-A bus is discovered using ARM_SMCCC_FEATURES mechanism performed
by the PSCI driver.
Clients are able to probe then use the FF-A bus by calling the DM class
searching APIs (e.g: uclass_first_device).
The Secure World is considered as one entity to communicate with
using the FF-A bus. FF-A communication is handled by one device and
one instance (the bus). This FF-A driver takes care of all the
interactions between Normal world and Secure World.
The driver exports its operations to be used by upper layers.
Tom Rini [Mon, 24 Jul 2023 17:55:59 +0000 (13:55 -0400)]
Merge branch '2023-07-22-TI-K3-improvements'
- Actually merge the assorted K3 platform improvements that were
supposed to be in commit 247aa5a19115 ("Merge branch
'2023-07-21-assorted-TI-platform-updates'")
Simon Glass [Wed, 19 Jul 2023 23:49:30 +0000 (17:49 -0600)]
buildman: Add an option to check maintainers and targets
In poking around it seems that many boards don't define a CONFIG_TARGET
Kconfig variable. This is not strictly necessary, but add an option to
buildman so these can be viewed.
Simon Glass [Wed, 19 Jul 2023 23:49:16 +0000 (17:49 -0600)]
buildman: Convert config_out to string IO
This is probably a little more efficient and it allows passing the object
to another function to write data. Convert config_out to use a string I/O
device.
Simon Glass [Wed, 19 Jul 2023 23:49:03 +0000 (17:49 -0600)]
buildman: Add a test for --boards
Add a simple functional test for the --boards option. Fix the example in
the docs while we are here. Also improve the docs for Builder.count so it
is clearer what it contains.
projects / u-boot.git / log