From: Peter Robinson <pbrobinson@gmail.com>
Date: Sat, 1 Jul 2017 17:44:03 +0000 (+0100)
Subject: mx6cuboxi: Add support for sata
X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=ff1815632563a826cfe49fc9496a36d00febb6e3;p=u-boot.git

mx6cuboxi: Add support for sata

The Cubox-i and Hummingboard series of devices have an option of
SATA on board, and depending on how the fuses are blown even the
option to boot SPL from SATA. So enable support for it so it can
be used to boot the OS from if people desire.

Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
---

diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
index 285588d80a..5c62216477 100644
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -22,6 +22,7 @@
 #include <linux/errno.h>
 #include <asm/gpio.h>
 #include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/sata.h>
 #include <asm/imx-common/video.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
@@ -314,6 +315,10 @@ int board_early_init_f(void)
 	ret = setup_display();
 #endif
 
+#ifdef CONFIG_CMD_SATA
+	setup_sata();
+#endif
+
 #ifdef CONFIG_USB_EHCI_MX6
 	setup_usb();
 #endif
diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
index bc22f56d1d..71acc7c4db 100644
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -21,6 +21,17 @@
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
 
+/* SATA Configuration */
+#define CONFIG_CMD_SATA
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_DWC_AHSATA
+#define CONFIG_SYS_SATA_MAX_DEVICE      1
+#define CONFIG_DWC_AHSATA_PORT_ID       0
+#define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
+#define CONFIG_LBA48
+#define CONFIG_LIBATA
+#endif
+
 /* Ethernet Configuration */
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
@@ -116,6 +127,7 @@
 
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
+	func(SATA, sata, 0) \
 	func(USB, usb, 0) \
 	func(PXE, pxe, na) \
 	func(DHCP, dhcp, na)