From: Adam Ford Date: Sat, 19 Feb 2022 23:08:46 +0000 (-0600) Subject: usb: ehci-omap: Remove OMAP_EHCI_PHYx_RESET_GPIO from Kconfig X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=fc4bee183024a35d0e730a5ca309a694a6df6774;p=u-boot.git usb: ehci-omap: Remove OMAP_EHCI_PHYx_RESET_GPIO from Kconfig With the omap-ehci driver now using the phy subsystem to enable and disable reset, the driver no longer needs to know which GPIO's are used, and they can be removed from Kconfig. Signed-off-by: Adam Ford --- diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index f0fb66abad..8f77412cc7 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -198,40 +198,6 @@ config USB_EHCI_OMAP Enables support for the on-chip EHCI controller on OMAP3 and later SoCs. -if USB_EHCI_OMAP - -config HAS_OMAP_EHCI_PHY1_RESET_GPIO - bool "PHY #1 requires a GPIO hold to it in RESET while PHY settles" - help - Enable this to be able to configure the GPIO number used to hold the - PHY in RESET for enough time until the PHY is settled and ready. - -config OMAP_EHCI_PHY1_RESET_GPIO - int "GPIO number to hold PHY #1 in RESET" - depends on HAS_OMAP_EHCI_PHY1_RESET_GPIO - -config HAS_OMAP_EHCI_PHY2_RESET_GPIO - bool "PHY #2 requires a GPIO hold to it in RESET while PHY settles" - help - Enable this to be able to configure the GPIO number used to hold the - PHY in RESET for enough time until the PHY is settled and ready. - -config OMAP_EHCI_PHY2_RESET_GPIO - int "GPIO number to hold PHY #2 in RESET" - depends on HAS_OMAP_EHCI_PHY2_RESET_GPIO - -config HAS_OMAP_EHCI_PHY3_RESET_GPIO - bool "PHY #3 requires a GPIO hold to it in RESET while PHY settles" - help - Enable this to be able to configure the GPIO number used to hold the - PHY in RESET for enough time until the PHY is settled and ready. - -config OMAP_EHCI_PHY3_RESET_GPIO - int "GPIO number to hold PHY #3 in RESET" - depends on HAS_OMAP_EHCI_PHY3_RESET_GPIO - -endif - config USB_EHCI_VF bool "Support for Vybrid on-chip EHCI USB controller" depends on ARCH_VF610