From: Patrice Chotard Date: Fri, 3 Aug 2018 13:07:39 +0000 (+0200) Subject: serial: stm32: Replace setparity by setconfig X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=fbd5c72d767d04adb780188cb47772ed386fb297;p=u-boot.git serial: stm32: Replace setparity by setconfig Replace stm32_serial_setparity by stm32_serial_setconfig which allows to set serial bits number, parity and stop bits number. Only parity setting is implemented. Signed-off-by: Patrick Delaunay Signed-off-by: Patrice Chotard Reviewed-by: Simon Glass --- diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c index f26234549c..66e02d5689 100644 --- a/drivers/serial/serial_stm32.c +++ b/drivers/serial/serial_stm32.c @@ -47,20 +47,28 @@ static int stm32_serial_setbrg(struct udevice *dev, int baudrate) return 0; } -static int stm32_serial_setparity(struct udevice *dev, enum serial_par parity) +static int stm32_serial_setconfig(struct udevice *dev, uint serial_config) { struct stm32x7_serial_platdata *plat = dev_get_platdata(dev); bool stm32f4 = plat->uart_info->stm32f4; u8 uart_enable_bit = plat->uart_info->uart_enable_bit; u32 cr1 = plat->base + CR1_OFFSET(stm32f4); u32 config = 0; - - if (stm32f4) - return -EINVAL; /* not supported in driver*/ + uint parity = SERIAL_GET_PARITY(serial_config); + uint bits = SERIAL_GET_BITS(serial_config); + uint stop = SERIAL_GET_STOP(serial_config); + + /* + * only parity config is implemented, check if other serial settings + * are the default one. + * (STM32F4 serial IP didn't support parity setting) + */ + if (bits != SERIAL_8_BITS || stop != SERIAL_ONE_STOP || stm32f4) + return -ENOTSUPP; /* not supported in driver*/ clrbits_le32(cr1, USART_CR1_RE | USART_CR1_TE | BIT(uart_enable_bit)); /* update usart configuration (uart need to be disable) - * PCE: parity check control + * PCE: parity check enable * PS : '0' : Even / '1' : Odd * M[1:0] = '00' : 8 Data bits * M[1:0] = '01' : 9 Data bits with parity @@ -77,6 +85,7 @@ static int stm32_serial_setparity(struct udevice *dev, enum serial_par parity) config = USART_CR1_PCE | USART_CR1_M0; break; } + clrsetbits_le32(cr1, USART_CR1_PCE | USART_CR1_PS | USART_CR1_M1 | USART_CR1_M0, @@ -210,7 +219,7 @@ static const struct dm_serial_ops stm32_serial_ops = { .pending = stm32_serial_pending, .getc = stm32_serial_getc, .setbrg = stm32_serial_setbrg, - .setparity = stm32_serial_setparity + .setconfig = stm32_serial_setconfig }; U_BOOT_DRIVER(serial_stm32) = {