From: York Sun Date: Thu, 28 Sep 2017 15:42:14 +0000 (-0700) Subject: armv8: layerscape: Enable falcon boot X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=fb97b8621e6c44e7762bf6f7fd82d1b00519d4fd;p=u-boot.git armv8: layerscape: Enable falcon boot Add jump_to_image_linux() for arm64. Add "noreturn" flag to armv8_switch_to_el2(). Add hooks to fsl-layerscape to enable falcon boot. Signed-off-by: York Sun Reviewed-by: Simon Glass Reviewed-by: Łukasz Majewski Tested-by: Łukasz Majewski --- diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon new file mode 100644 index 0000000000..2505f408ab --- /dev/null +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon @@ -0,0 +1,140 @@ +Falcon boot option +------------------ +Falcon boot is a short cut boot method for SD/eMMC targets. It skips loading the +RAM version U-Boot. Instead, it loads FIT image and boot directly to Linux. +CONFIG_SPL_OS_BOOT enables falcon boot. CONFIG_SPL_LOAD_FIT enables the FIT +image support (also need CONFIG_SPL_OF_LIBFDT, CONFIG_SPL_FIT and optionally +CONFIG_SPL_GZIP). + +To enable falcon boot, a hook function spl_start_uboot() returns 0 to indicate +booting U-Boot is not the first choice. The kernel FIT image needs to be put +at CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR. SPL mmc driver reads the header to +determine if this is a FIT image. If true, FIT image components are parsed and +copied or decompressed (if applicable) to their destinations. If FIT image is +not found, normal U-Boot flow will follow. + +An important part of falcon boot is to prepare the device tree. A normal U-Boot +does FDT fixups when booting Linux. For falcon boot, Linux boots directly from +SPL, skipping the normal U-Boot. The device tree has to be prepared in advance. +A command "spl export" should be called under the normal RAM version U-Boot. +It is equivalent to go through "bootm" step-by-step until device tree fixup is +done. The device tree in memory is the one needed for falcon boot. Falcon boot +flow suggests to save this image to SD/eMMC at the location pointed by macro +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR, with maximum size specified by macro +CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS. However, when FIT image is used for +Linux, the device tree stored in FIT image overwrites the memory loaded by spl +driver from these sectors. We could change this loading order to favor the +stored sectors. But when secure boot is enabled, these sectors are used for +signature header and needs to be loaded before the FIT image. So it is important +to understand the device tree in FIT image should be the one actually used, or +leave it absent to favor the stored sectors. It is easier to deploy the FIT +image with embedded static device tree to multiple boards. + +Macro CONFIG_SYS_SPL_ARGS_ADDR serves two purposes. One is the pointer to load +the stored sectors to. Normally this is the static device tree. The second +purpose is the memory location of signature header for secure boot. After the +FIT image is loaded into memory, it is validated against the signature header +before individual components are extracted (and optionally decompressed) into +their final memory locations, respectively. After the validation, the header +is no longer used. The static device tree is copied into this location. So +this macro is passed as the location of device tree when booting Linux. + +Steps to prepare static device tree +----------------------------------- +To prepare the static device tree for Layerscape boards, it is important to +understand the fixups in U-Boot. Memory size and location, as well as reserved +memory blocks are added/updated. Ethernet MAC addressed are updated. FMan +microcode (if used) is embedded in the device tree. Kernel command line and +initrd information are embedded. Others including CPU status, boot method, +Ethernet port status, etc. are also updated. + +Following normal booting process, all variables are set, all images are loaded +before "bootm" command would be issued to boot, run command + +spl export fdt
+ +where the address is the location of FIT image. U-Boot goes through the booting +process as if "bootm start", "bootm loados", "bootm ramdisk"... commands but +stops before "bootm go". There we have the fixed-up device tree in memory. +We can check the device tree header by these commands + +fdt addr +fdt header + +Where the fdt address is the device tree in memory. It is printed by U-Boot. +It is useful to know the exact size. One way to extract this static device +tree is to save it to eMMC/SD using command in U-Boot, and extract under Linux +with these commands, repectively + +mmc write
+dd if=/dev/mmcblk0 of= bs=512 skip= count= + +Note, U-Boot takes values as hexadecimals while Linux takes them as decimals by +default. If using NAND or other storage, the commands are slightly different. +When we have the static device tree image, we can re-make the FIT image with +it. It is important to specify the load addresses in FIT image for every +components. Otherwise U-Boot cannot load them correctly. + +Generate FIT image with static device tree +------------------------------------------ +Example: + +/dts-v1/; + +/ { + description = "Image file for the LS1043A Linux Kernel"; + #address-cells = <1>; + + images { + kernel@1 { + description = "ARM64 Linux kernel"; + data = /incbin/("./arch/arm64/boot/Image.gz"); + type = "kernel"; + arch = "arm64"; + os = "linux"; + compression = "gzip"; + load = <0x80080000>; + entry = <0x80080000>; + }; + fdt@1 { + description = "Flattened Device Tree blob"; + data = /incbin/("./fsl-ls1043ardb-static.dtb"); + type = "flat_dt"; + arch = "arm64"; + compression = "none"; + load = <0x90000000>; + }; + ramdisk@1 { + description = "LS1043 Ramdisk"; + data = /incbin/("./rootfs.cpio.gz"); + type = "ramdisk"; + arch = "arm64"; + os = "linux"; + compression = "gzip"; + load = <0xa0000000>; + }; + }; + + configurations { + default = "config@1"; + config@1 { + description = "Boot Linux kernel"; + kernel = "kernel@1"; + fdt = "fdt@1"; + ramdisk = "ramdisk@1"; + loadables = "fdt", "ramdisk"; + }; + }; +}; + +The "loadables" is not optional. It tells SPL which images to load into memory. + +Other things to consider +----------------------- +Falcon boot skips a lot of initialization in U-Boot. If Linux expects the +hardware to be initialized by U-Boot, the related code should be ported to SPL +build. For example, if Linux expect Ethernet PHY to be initialized in U-Boot +(which is not a common case), the PHY initialization has to be included in +falcon boot. This increases the SPL image size and should be handled carefully. +If Linux has PHY driver enabled, it still depends on the correct MDIO bus setup +in U-Boot. Normal U-Boot sets the MDC ratio to generate a proper clock signal. diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c index 2534b4be5f..1c694e7c67 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c @@ -117,4 +117,29 @@ void board_init_f(ulong dummy) gd->arch.tlb_allocated = gd->arch.tlb_addr; #endif /* CONFIG_SPL_FSL_LS_PPA */ } + +#ifdef CONFIG_SPL_OS_BOOT +/* + * Return + * 0 if booting into OS is selected + * 1 if booting into U-Boot is selected + */ +int spl_start_uboot(void) +{ + env_init(); + if (env_get_yesno("boot_os") != 0) + return 0; + + return 1; +} +#endif /* CONFIG_SPL_OS_BOOT */ +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + /* Just empty function now - can't decide what to choose */ + debug("%s: %s\n", __func__, name); + + return 0; +} +#endif #endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 79bd19af7d..1d7d4f35c4 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -215,8 +215,8 @@ void __asm_switch_ttbr(u64 new_ttbr); * @entry_point: kernel entry point * @es_flag: execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32 */ -void armv8_switch_to_el2(u64 args, u64 mach_nr, u64 fdt_addr, - u64 arg4, u64 entry_point, u64 es_flag); +void __noreturn armv8_switch_to_el2(u64 args, u64 mach_nr, u64 fdt_addr, + u64 arg4, u64 entry_point, u64 es_flag); /* * Switch from EL2 to EL1 for ARMv8 * diff --git a/arch/arm/lib/spl.c b/arch/arm/lib/spl.c index 27d6682c0b..ab5d2277aa 100644 --- a/arch/arm/lib/spl.c +++ b/arch/arm/lib/spl.c @@ -7,6 +7,7 @@ * * SPDX-License-Identifier: GPL-2.0+ */ + #include #include #include @@ -47,6 +48,15 @@ void __weak board_init_f(ulong dummy) * image. */ #ifdef CONFIG_SPL_OS_BOOT +#ifdef CONFIG_ARM64 +void __noreturn jump_to_image_linux(struct spl_image_info *spl_image) +{ + debug("Entering kernel arg pointer: 0x%p\n", spl_image->arg); + cleanup_before_linux(); + armv8_switch_to_el2((u64)spl_image->arg, 0, 0, 0, + spl_image->entry_point, ES_TO_AARCH64); +} +#else void __noreturn jump_to_image_linux(struct spl_image_info *spl_image) { unsigned long machid = 0xffffffff; @@ -62,4 +72,5 @@ void __noreturn jump_to_image_linux(struct spl_image_info *spl_image) cleanup_before_linux(); image_entry(0, machid, spl_image->arg); } +#endif /* CONFIG_ARM64 */ #endif