From: Lokesh Vutla Date: Mon, 4 Feb 2013 04:22:05 +0000 (+0000) Subject: ARM: OMAP5: Clean up iosettings code X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=ef1697e99f482b0e6a64df465ffff77251719abb;p=u-boot.git ARM: OMAP5: Clean up iosettings code There is some code duplication in the ddr io settings code. This is avoided by moving the data to a Soc specific place and letting the code generic. This avoids unnessecary code addition for future socs. Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini --- diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index 320d5bba68..7ca6709d0b 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -32,6 +32,7 @@ #include #include #include +#include struct prcm_regs const **prcm = (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR; @@ -414,6 +415,24 @@ void enable_non_essential_clocks(void) MODULE_CLKCTRL_MODULEMODE_SHIFT); } +const struct ctrl_ioregs ioregs_omap5430 = { + .ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, + .ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, + .ctrl_ddrio_0 = DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL, + .ctrl_ddrio_1 = DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL, + .ctrl_ddrio_2 = DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL, +}; + +const struct ctrl_ioregs ioregs_omap5432_es1 = { + .ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, + .ctrl_lpddr2ch = 0x0, + .ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, + .ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE, + .ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE, + .ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE, + .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, +}; + void hw_data_init(void) { u32 omap_rev = omap_revision(); @@ -438,3 +457,20 @@ void hw_data_init(void) *ctrl = &omap5_ctrl; } + +void get_ioregs(const struct ctrl_ioregs **regs) +{ + u32 omap_rev = omap_revision(); + + switch (omap_rev) { + case OMAP5430_ES1_0: + *regs = &ioregs_omap5430; + break; + case OMAP5432_ES1_0: + *regs = &ioregs_omap5432_es1; + break; + + default: + printf("\n INVALID OMAP REVISION "); + } +} diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index 1863c69c54..dfc0e447e0 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -56,60 +56,47 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx; /* LPDDR2 specific IO settings */ static void io_settings_lpddr2(void) { - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - (*ctrl)->control_ddrch1_0); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - (*ctrl)->control_ddrch1_1); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - (*ctrl)->control_ddrch2_0); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - (*ctrl)->control_ddrch2_1); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, - (*ctrl)->control_lpddr2ch1_0); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, - (*ctrl)->control_lpddr2ch1_1); - writel(DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL, - (*ctrl)->control_ddrio_0); - writel(DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL, - (*ctrl)->control_ddrio_1); - writel(DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL, - (*ctrl)->control_ddrio_2); + const struct ctrl_ioregs *ioregs; + + get_ioregs(&ioregs); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1); + writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0); + writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1); + writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2); } /* DDR3 specific IO settings */ static void io_settings_ddr3(void) { u32 io_settings = 0; + const struct ctrl_ioregs *ioregs; - writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, - (*ctrl)->control_ddr3ch1_0); - writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - (*ctrl)->control_ddrch1_0); - writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - (*ctrl)->control_ddrch1_1); - - writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, - (*ctrl)->control_ddr3ch2_0); - writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - (*ctrl)->control_ddrch2_0); - writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - (*ctrl)->control_ddrch2_1); - - writel(DDR_IO_0_VREF_CELLS_DDR3_VALUE, - (*ctrl)->control_ddrio_0); - writel(DDR_IO_1_VREF_CELLS_DDR3_VALUE, - (*ctrl)->control_ddrio_1); - writel(DDR_IO_2_VREF_CELLS_DDR3_VALUE, - (*ctrl)->control_ddrio_2); + get_ioregs(&ioregs); + writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch1_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1); + + writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch2_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1); + + writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0); + writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1); + writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2); /* omap5432 does not use lpddr2 */ - writel(0x0, (*ctrl)->control_lpddr2ch1_0); - writel(0x0, (*ctrl)->control_lpddr2ch1_1); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1); - writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, - (*ctrl)->control_emif1_sdram_config_ext); - writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, - (*ctrl)->control_emif2_sdram_config_ext); + writel(ioregs->ctrl_emif_sdram_config_ext, + (*ctrl)->control_emif1_sdram_config_ext); + writel(ioregs->ctrl_emif_sdram_config_ext, + (*ctrl)->control_emif2_sdram_config_ext); /* Disable DLL select */ io_settings = (readl((*ctrl)->control_port_emif1_sdram_config) diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index a91da7d787..873ccd7df1 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -229,5 +229,15 @@ struct omap_boot_parameters { unsigned char reset_reason; unsigned char ch_flags; }; + +struct ctrl_ioregs { + u32 ctrl_ddrch; + u32 ctrl_lpddr2ch; + u32 ctrl_ddr3ch; + u32 ctrl_ddrio_0; + u32 ctrl_ddrio_1; + u32 ctrl_ddrio_2; + u32 ctrl_emif_sdram_config_ext; +}; #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index 2b3a071d2b..201ed6f027 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -58,6 +58,7 @@ void omap_vc_init(u16 speed_khz); int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); u32 warm_reset(void); void force_emif_self_refresh(void); +void get_ioregs(const struct ctrl_ioregs **regs); /* * This is used to verify if the configuration header