From: Andrew F. Davis Date: Mon, 28 Jan 2019 17:43:26 +0000 (-0600) Subject: doc: ti-secure: Add ULO info for AM57xx/DRA7xx secure devices from TI X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=eca61ae70c80ce42272ab8b999750d925f0ad85c;p=u-boot.git doc: ti-secure: Add ULO info for AM57xx/DRA7xx secure devices from TI Booting from UART and USB on HS devices is now supported for this platform. Update documentation for the same. Signed-off-by: Andrew F. Davis Reviewed-by: Tom Rini --- diff --git a/doc/README.ti-secure b/doc/README.ti-secure index 4b5380c0f3..76950253ac 100644 --- a/doc/README.ti-secure +++ b/doc/README.ti-secure @@ -108,7 +108,8 @@ Booting of U-Boot SPL Invoking the script for DRA7xx/AM57xx Secure Devices ==================================================== - create-boot-image.sh + create-boot-image.sh \ + is a value that specifies the type of the image to generate OR the action the image generation tool will take. Valid @@ -116,7 +117,6 @@ Booting of U-Boot SPL X-LOADER - Generates an image for NOR or QSPI boot modes MLO - Generates an image for SD/MMC/eMMC boot modes ULO - Generates an image for USB/UART peripheral boot modes - Note: ULO is not yet used by the u-boot build process is the full path and filename of the public world boot loader binary file (for this platform, this is always u-boot-spl.bin). @@ -130,9 +130,13 @@ Booting of U-Boot SPL the device ROM bootloader requires for loading from the FAT partition of an SD card (same as on non-secure devices) + u-boot-spl_HS_ULO - boot image for USB/UART peripheral boot modes u-boot-spl_HS_X-LOADER - boot image for all other flash memories including QSPI and NOR flash + is the address at which SOC ROM should load the + + Invoking the script for Keystone2 Secure Devices =============================================