From: Stefan Roese Date: Tue, 27 Aug 2019 06:14:50 +0000 (+0200) Subject: arm: at91: gardena-smart-gateway-at91sam: Enable CONFIG_SYS_NAND_USE_FLASH_BBT X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=e074d0f79b2e2893e5c1752b2c302bb4aa5a491e;p=u-boot.git arm: at91: gardena-smart-gateway-at91sam: Enable CONFIG_SYS_NAND_USE_FLASH_BBT This patch enables the BBT in NAND on the AT91SAM based GARDENA smart Gateway. This is especially important, since the Linux driver also enables this option and uses the BBT table pages. Without setting this option, U-Boot will try to re-use these pages again (e.g. UBI). Signed-off-by: Stefan Roese Cc: Eugen Hristev Cc: Tom Rini --- diff --git a/configs/gardena-smart-gateway-at91sam_defconfig b/configs/gardena-smart-gateway-at91sam_defconfig index 65dd083854..4a2cc331a6 100644 --- a/configs/gardena-smart-gateway-at91sam_defconfig +++ b/configs/gardena-smart-gateway-at91sam_defconfig @@ -66,7 +66,6 @@ CONFIG_AT91_GPIO=y CONFIG_LED=y CONFIG_LED_GPIO=y # CONFIG_MMC is not set -# CONFIG_SYS_NAND_USE_FLASH_BBT is not set CONFIG_NAND_ATMEL=y CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y CONFIG_DM_ETH=y