From: Marek Vasut Date: Sun, 9 Jun 2024 21:32:17 +0000 (+0200) Subject: usb: gadget: Drop all gadget_is_*() functions X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=db62b6a0a016b69cf0e26eea4004c3edbebd4394;p=u-boot.git usb: gadget: Drop all gadget_is_*() functions The only actually used gadget_is_*() functions are the one for DWC3 used in epautoconf.c usb_ep_autoconfig() and one for MUSB in ether.c. The DWC3 one should be fixed in some separate patch. Inline the gadget_is_dwc3() and stop using ifdefs in favor of IS_ENABLED() macro. The rest of gadget_is_*() calls in usb_ep_autoconfig() can never be anything but 0, since those gadgets are not supported in U-Boot, so remove all that unused code. Remove gadget_chips.h as well. Signed-off-by: Marek Vasut Tested-by: Alexander Sverdlin Reviewed-by: Mattijs Korpershoek Tested-by: Mattijs Korpershoek # on vim3 Link: https://lore.kernel.org/r/20240609213449.194762-4-marek.vasut+renesas@mailbox.org Signed-off-by: Mattijs Korpershoek --- diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 0a70035ce0..09950ceeae 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -12,7 +12,6 @@ #include #include #include -#include "gadget_chips.h" #define isdigit(c) ('0' <= (c) && (c) <= '9') @@ -222,41 +221,9 @@ struct usb_ep *usb_ep_autoconfig( /* First, apply chip-specific "best usage" knowledge. * This might make a good usb_gadget_ops hook ... */ - if (gadget_is_net2280(gadget) && type == USB_ENDPOINT_XFER_INT) { - /* ep-e, ep-f are PIO with only 64 byte fifos */ - ep = find_ep(gadget, "ep-e"); - if (ep && ep_matches(gadget, ep, desc)) - return ep; - ep = find_ep(gadget, "ep-f"); - if (ep && ep_matches(gadget, ep, desc)) - return ep; - - } else if (gadget_is_goku(gadget)) { - if (USB_ENDPOINT_XFER_INT == type) { - /* single buffering is enough */ - ep = find_ep(gadget, "ep3-bulk"); - if (ep && ep_matches(gadget, ep, desc)) - return ep; - } else if (USB_ENDPOINT_XFER_BULK == type - && (USB_DIR_IN & desc->bEndpointAddress)) { - /* DMA may be available */ - ep = find_ep(gadget, "ep2-bulk"); - if (ep && ep_matches(gadget, ep, desc)) - return ep; - } - - } else if (gadget_is_sh(gadget) && USB_ENDPOINT_XFER_INT == type) { - /* single buffering is enough; maybe 8 byte fifo is too */ - ep = find_ep(gadget, "ep3in-bulk"); - if (ep && ep_matches(gadget, ep, desc)) - return ep; - - } else if (gadget_is_mq11xx(gadget) && USB_ENDPOINT_XFER_INT == type) { - ep = find_ep(gadget, "ep1-bulk"); - if (ep && ep_matches(gadget, ep, desc)) - return ep; -#ifndef CONFIG_SPL_BUILD - } else if (gadget_is_dwc3(gadget)) { + if (!IS_ENABLED(CONFIG_SPL_BUILD) && + IS_ENABLED(CONFIG_USB_DWC3_GADGET) && + !strcmp("dwc3-gadget", gadget->name)) { const char *name = NULL; /* * First try standard, common configuration: ep1in-bulk, @@ -278,7 +245,6 @@ struct usb_ep *usb_ep_autoconfig( ep = find_ep(gadget, name); if (ep && ep_matches(gadget, ep, desc)) return ep; -#endif } if (gadget->ops->match_ep) diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index e76464e121..b7b7bacb00 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -1989,13 +1989,11 @@ static int eth_bind(struct usb_gadget *gadget) * standard protocol is _strongly_ preferred for interop purposes. * (By everyone except Microsoft.) */ - if (gadget_is_musbhdrc(gadget)) { + + if (IS_ENABLED(CONFIG_USB_MUSB_GADGET) && + !strcmp("musb-hdrc", gadget->name)) { /* reduce tx dma overhead by avoiding special cases */ zlp = 0; - } else if (gadget_is_sh(gadget)) { - /* sh doesn't support multiple interfaces or configs */ - cdc = 0; - rndis = 0; } gcnum = (U_BOOT_VERSION_NUM << 4) | U_BOOT_VERSION_NUM_PATCH; diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h deleted file mode 100644 index 316051686c..0000000000 --- a/drivers/usb/gadget/gadget_chips.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * USB device controllers have lots of quirks. Use these macros in - * gadget drivers or other code that needs to deal with them, and which - * autoconfigures instead of using early binding to the hardware. - * - * This SHOULD eventually work like the ARM mach_is_*() stuff, driven by - * some config file that gets updated as new hardware is supported. - * (And avoiding all runtime comparisons in typical one-choice configs!) - * - * NOTE: some of these controller drivers may not be available yet. - * Some are available on 2.4 kernels; several are available, but not - * yet pushed in the 2.6 mainline tree. - * - * Ported to U-Boot by: Thomas Smits and - * Remy Bohmer - */ -#ifdef CONFIG_USB_GADGET_NET2280 -#define gadget_is_net2280(g) (!strcmp("net2280", (g)->name)) -#else -#define gadget_is_net2280(g) 0 -#endif - -#ifdef CONFIG_USB_GADGET_AMD5536UDC -#define gadget_is_amd5536udc(g) (!strcmp("amd5536udc", (g)->name)) -#else -#define gadget_is_amd5536udc(g) 0 -#endif - -#ifdef CONFIG_USB_GADGET_DUMMY_HCD -#define gadget_is_dummy(g) (!strcmp("dummy_udc", (g)->name)) -#else -#define gadget_is_dummy(g) 0 -#endif - -#ifdef CONFIG_USB_GADGET_GOKU -#define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name)) -#else -#define gadget_is_goku(g) 0 -#endif - -/* SH3 UDC -- not yet ported 2.4 --> 2.6 */ -#ifdef CONFIG_USB_GADGET_SUPERH -#define gadget_is_sh(g) (!strcmp("sh_udc", (g)->name)) -#else -#define gadget_is_sh(g) 0 -#endif - -/* handhelds.org tree (?) */ -#ifdef CONFIG_USB_GADGET_MQ11XX -#define gadget_is_mq11xx(g) (!strcmp("mq11xx_udc", (g)->name)) -#else -#define gadget_is_mq11xx(g) 0 -#endif - -#ifdef CONFIG_USB_GADGET_OMAP -#define gadget_is_omap(g) (!strcmp("omap_udc", (g)->name)) -#else -#define gadget_is_omap(g) 0 -#endif - -/* not yet ported 2.4 --> 2.6 */ -#ifdef CONFIG_USB_GADGET_N9604 -#define gadget_is_n9604(g) (!strcmp("n9604_udc", (g)->name)) -#else -#define gadget_is_n9604(g) 0 -#endif - -#ifdef CONFIG_USB_GADGET_ATMEL_USBA -#define gadget_is_atmel_usba(g) (!strcmp("atmel_usba_udc", (g)->name)) -#else -#define gadget_is_atmel_usba(g) 0 -#endif - -#ifdef CONFIG_USB_GADGET_AT91 -#define gadget_is_at91(g) (!strcmp("at91_udc", (g)->name)) -#else -#define gadget_is_at91(g) 0 -#endif - -/* status unclear */ -#ifdef CONFIG_USB_GADGET_IMX -#define gadget_is_imx(g) (!strcmp("imx_udc", (g)->name)) -#else -#define gadget_is_imx(g) 0 -#endif - -#ifdef CONFIG_USB_GADGET_FSL_USB2 -#define gadget_is_fsl_usb2(g) (!strcmp("fsl-usb2-udc", (g)->name)) -#else -#define gadget_is_fsl_usb2(g) 0 -#endif - -/* Mentor high speed function controller */ -/* from Montavista kernel (?) */ -#ifdef CONFIG_USB_GADGET_MUSBHSFC -#define gadget_is_musbhsfc(g) (!strcmp("musbhsfc_udc", (g)->name)) -#else -#define gadget_is_musbhsfc(g) 0 -#endif - -/* Mentor high speed "dual role" controller, in peripheral role */ -#ifdef CONFIG_USB_MUSB_GADGET -#define gadget_is_musbhdrc(g) (!strcmp("musb-hdrc", (g)->name)) -#else -#define gadget_is_musbhdrc(g) 0 -#endif - -#ifdef CONFIG_USB_GADGET_M66592 -#define gadget_is_m66592(g) (!strcmp("m66592_udc", (g)->name)) -#else -#define gadget_is_m66592(g) 0 -#endif - -#ifdef CONFIG_CI_UDC -#define gadget_is_ci(g) (!strcmp("ci_udc", (g)->name)) -#else -#define gadget_is_ci(g) 0 -#endif - -#ifdef CONFIG_USB_DWC3_GADGET -#define gadget_is_dwc3(g) (!strcmp("dwc3-gadget", (g)->name)) -#else -#define gadget_is_dwc3(g) 0 -#endif - -#ifdef CONFIG_USB_CDNS3_GADGET -#define gadget_is_cdns3(g) (!strcmp("cdns3-gadget", (g)->name)) -#else -#define gadget_is_cdns3(g) 0 -#endif - -#ifdef CONFIG_USB_GADGET_MAX3420 -#define gadget_is_max3420(g) (!strcmp("max3420-udc", (g)->name)) -#else -#define gadget_is_max3420(g) 0 -#endif - -#ifdef CONFIG_USB_MTU3_GADGET -#define gadget_is_mtu3(g) (!strcmp("mtu3-gadget", (g)->name)) -#else -#define gadget_is_mtu3(g) 0 -#endif - -#ifdef CONFIG_USB_GADGET_DWC2_OTG -#define gadget_is_dwc2(g) (!strcmp("dwc2-udc", (g)->name)) -#else -#define gadget_is_dwc2(g) 0 -#endif