From: Venkatesh Yadav Abbarapu Date: Mon, 4 Sep 2023 03:20:35 +0000 (+0530) Subject: xilinx: zynqmp: Do not setup boot_targets if driver is not enabled X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=d75c65a5259e60b9534b48ddabfc1cbb9c098aac;p=u-boot.git xilinx: zynqmp: Do not setup boot_targets if driver is not enabled SOC can boot in the device which is not accessible from APU and running this is detected as error which ends up in stopping boot process. Boot mode detection and logic around is present to setup priority on boot devices that SOC boot device is likely also used for booting OS. Change logic to detect this case with showing message about it but don't fail in boot process and don't prioritize boot device in this case. Signed-off-by: Venkatesh Yadav Abbarapu Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/20230904032035.11926-4-venkatesh.abbarapu@amd.com --- diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index 309f24a5f4..0b6d4e5707 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -391,7 +391,7 @@ int board_late_init(void) int bootseq = -1; int bootseq_len = 0; int env_targets_len = 0; - const char *mode; + const char *mode = NULL; char *new_targets; char *env_targets; int ret, multiboot; @@ -442,8 +442,8 @@ int board_late_init(void) "mmc@ff160000", &dev) && uclass_get_device_by_name(UCLASS_MMC, "sdhci@ff160000", &dev)) { - puts("Boot from EMMC but without SD0 enabled!\n"); - return -1; + debug("SD0 driver for SD0 device is not present\n"); + break; } debug("mmc0 device found at %p, seq %d\n", dev, dev_seq(dev)); @@ -457,8 +457,8 @@ int board_late_init(void) "mmc@ff160000", &dev) && uclass_get_device_by_name(UCLASS_MMC, "sdhci@ff160000", &dev)) { - puts("Boot from SD0 but without SD0 enabled!\n"); - return -1; + debug("SD0 driver for SD0 device is not present\n"); + break; } debug("mmc0 device found at %p, seq %d\n", dev, dev_seq(dev)); @@ -475,8 +475,8 @@ int board_late_init(void) "mmc@ff170000", &dev) && uclass_get_device_by_name(UCLASS_MMC, "sdhci@ff170000", &dev)) { - puts("Boot from SD1 but without SD1 enabled!\n"); - return -1; + debug("SD1 driver for SD1 device is not present\n"); + break; } debug("mmc1 device found at %p, seq %d\n", dev, dev_seq(dev)); @@ -490,39 +490,40 @@ int board_late_init(void) env_set("modeboot", "nandboot"); break; default: - mode = ""; printf("Invalid Boot Mode:0x%x\n", bootmode); break; } - if (bootseq >= 0) { - bootseq_len = snprintf(NULL, 0, "%i", bootseq); - debug("Bootseq len: %x\n", bootseq_len); - env_set_hex("bootseq", bootseq); - } + if (mode) { + if (bootseq >= 0) { + bootseq_len = snprintf(NULL, 0, "%i", bootseq); + debug("Bootseq len: %x\n", bootseq_len); + env_set_hex("bootseq", bootseq); + } - /* - * One terminating char + one byte for space between mode - * and default boot_targets - */ - env_targets = env_get("boot_targets"); - if (env_targets) - env_targets_len = strlen(env_targets); - - new_targets = calloc(1, strlen(mode) + env_targets_len + 2 + - bootseq_len); - if (!new_targets) - return -ENOMEM; - - if (bootseq >= 0) - sprintf(new_targets, "%s%x %s", mode, bootseq, - env_targets ? env_targets : ""); - else - sprintf(new_targets, "%s %s", mode, - env_targets ? env_targets : ""); - - env_set("boot_targets", new_targets); - free(new_targets); + /* + * One terminating char + one byte for space between mode + * and default boot_targets + */ + env_targets = env_get("boot_targets"); + if (env_targets) + env_targets_len = strlen(env_targets); + + new_targets = calloc(1, strlen(mode) + env_targets_len + 2 + + bootseq_len); + if (!new_targets) + return -ENOMEM; + + if (bootseq >= 0) + sprintf(new_targets, "%s%x %s", mode, bootseq, + env_targets ? env_targets : ""); + else + sprintf(new_targets, "%s %s", mode, + env_targets ? env_targets : ""); + + env_set("boot_targets", new_targets); + free(new_targets); + } reset_reason();