From: Paul Barker Date: Tue, 27 Feb 2024 20:40:29 +0000 (+0000) Subject: arm: dts: rzg2l: Sync with Linux v6.7 X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=d4f0ff93c8a7ef743eeea38f9782aad7bcd6fcf5;p=u-boot.git arm: dts: rzg2l: Sync with Linux v6.7 Pull in the recent changes to the RZ/G2L device tree and related dtsi files so that we're aligned with Linux v6.7 (commit 0dd3ee311255). Signed-off-by: Paul Barker Reviewed-by: Marek Vasut --- diff --git a/arch/arm/dts/r9a07g044.dtsi b/arch/arm/dts/r9a07g044.dtsi index 232910e074..66f68fc2b2 100644 --- a/arch/arm/dts/r9a07g044.dtsi +++ b/arch/arm/dts/r9a07g044.dtsi @@ -223,20 +223,20 @@ , ; interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", - "tgiv0", "tgie0", "tgif0", - "tgia1", "tgib1", "tgiv1", "tgiu1", - "tgia2", "tgib2", "tgiv2", "tgiu2", + "tciv0", "tgie0", "tgif0", + "tgia1", "tgib1", "tciv1", "tciu1", + "tgia2", "tgib2", "tciv2", "tciu2", "tgia3", "tgib3", "tgic3", "tgid3", - "tgiv3", + "tciv3", "tgia4", "tgib4", "tgic4", "tgid4", - "tgiv4", + "tciv4", "tgiu5", "tgiv5", "tgiw5", "tgia6", "tgib6", "tgic6", "tgid6", - "tgiv6", + "tciv6", "tgia7", "tgib7", "tgic7", "tgid7", - "tgiv7", + "tciv7", "tgia8", "tgib8", "tgic8", "tgid8", - "tgiv8", "tgiu8"; + "tciv8", "tciu8"; clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>; power-domains = <&cpg>; resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>; diff --git a/arch/arm/dts/r9a07g044l2-smarc.dts b/arch/arm/dts/r9a07g044l2-smarc.dts index bc2af6c92c..568d49cfe4 100644 --- a/arch/arm/dts/r9a07g044l2-smarc.dts +++ b/arch/arm/dts/r9a07g044l2-smarc.dts @@ -6,6 +6,27 @@ */ /dts-v1/; + +/* Enable SCIF2 (SER0) on PMOD1 (CN7) */ +#define PMOD1_SER0 1 + +/* + * To enable MTU3a PWM on PMOD0, + * Disable PMOD1_SER0 by setting "#define PMOD1_SER0 0" above and + * enable PMOD_MTU3 by setting "#define PMOD_MTU3 1" below. + */ +#define PMOD_MTU3 0 + +#if (PMOD_MTU3 && PMOD1_SER0) +#error "Cannot set as PMOD_MTU3 and PMOD1_SER0 are mutually exclusive " +#endif + +#define MTU3_COUNTER_Z_PHASE_SIGNAL 0 + +#if (!PMOD_MTU3 && MTU3_COUNTER_Z_PHASE_SIGNAL) +#error "Cannot set 1 to MTU3_COUNTER_Z_PHASE_SIGNAL as PMOD_MTU3=0" +#endif + #include "r9a07g044l2.dtsi" #include "rzg2l-smarc-som.dtsi" #include "rzg2l-smarc-pinfunction.dtsi" diff --git a/arch/arm/dts/rz-smarc-common.dtsi b/arch/arm/dts/rz-smarc-common.dtsi index 3962d47b3e..b7a3e6caa3 100644 --- a/arch/arm/dts/rz-smarc-common.dtsi +++ b/arch/arm/dts/rz-smarc-common.dtsi @@ -32,12 +32,6 @@ stdout-path = "serial0:115200n8"; }; - audio_mclock: audio_mclock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <11289600>; - }; - snd_rzg2l: sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; @@ -55,7 +49,7 @@ }; codec_dai: simple-audio-card,codec { - clocks = <&audio_mclock>; + clocks = <&versa3 2>; sound-dai = <&wm8978>; }; }; @@ -76,13 +70,19 @@ gpios-states = <1>; states = <3300000 1>, <1800000 0>; }; + + x1: x1-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; }; -&audio_clk1{ +&audio_clk1 { clock-frequency = <11289600>; }; -&audio_clk2{ +&audio_clk2 { clock-frequency = <12288000>; }; diff --git a/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi b/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi index 9085d8c76c..18c526c7a4 100644 --- a/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi +++ b/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi @@ -53,6 +53,26 @@ ; /* SCL */ }; + mtu3_pins: mtu3 { + mtu3-ext-clk-input-pin { + pinmux = , /* MTCLKA */ + ; /* MTCLKB */ + }; + + mtu3-pwm { + pinmux = , /* MTIOC3A */ + , /* MTIOC3B */ + , /* MTIOC3C */ + ; /* MTIOC3D */ + }; + +#if MTU3_COUNTER_Z_PHASE_SIGNAL + mtu3-zphase-clk { + pinmux = ; /* MTIOC1A */ + }; +#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */ + }; + scif0_pins: scif0 { pinmux = , /* TxD */ ; /* RxD */ diff --git a/arch/arm/dts/rzg2l-smarc-som.dtsi b/arch/arm/dts/rzg2l-smarc-som.dtsi index fbbb4f0344..547859c388 100644 --- a/arch/arm/dts/rzg2l-smarc-som.dtsi +++ b/arch/arm/dts/rzg2l-smarc-som.dtsi @@ -73,6 +73,13 @@ gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>; regulator-always-on; }; + + /* 32.768kHz crystal */ + x2: x2-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; &adc { @@ -100,7 +107,7 @@ rxc-skew-psec = <2400>; txc-skew-psec = <2400>; rxdv-skew-psec = <0>; - txdv-skew-psec = <0>; + txen-skew-psec = <0>; rxd0-skew-psec = <0>; rxd1-skew-psec = <0>; rxd2-skew-psec = <0>; @@ -128,7 +135,7 @@ rxc-skew-psec = <2400>; txc-skew-psec = <2400>; rxdv-skew-psec = <0>; - txdv-skew-psec = <0>; + txen-skew-psec = <0>; rxd0-skew-psec = <0>; rxd1-skew-psec = <0>; rxd2-skew-psec = <0>; @@ -148,6 +155,17 @@ mali-supply = <®_1p1v>; }; +&i2c3 { + raa215300: pmic@12 { + compatible = "renesas,raa215300"; + reg = <0x12>, <0x6f>; + reg-names = "main", "rtc"; + + clocks = <&x2>; + clock-names = "xin"; + }; +}; + &ostm1 { status = "okay"; }; diff --git a/arch/arm/dts/rzg2l-smarc.dtsi b/arch/arm/dts/rzg2l-smarc.dtsi index 2a158a954b..37807f1bda 100644 --- a/arch/arm/dts/rzg2l-smarc.dtsi +++ b/arch/arm/dts/rzg2l-smarc.dtsi @@ -8,9 +8,6 @@ #include #include -/* comment the #define statement to disable SCIF2 (SER0) on PMOD1 (CN7) */ -#define PMOD1_SER0 1 - / { aliases { serial1 = &scif2; @@ -113,7 +110,47 @@ #sound-dai-cells = <0>; reg = <0x1a>; }; + + versa3: clock-generator@68 { + compatible = "renesas,5p35023"; + reg = <0x68>; + #clock-cells = <1>; + clocks = <&x1>; + + renesas,settings = [ + 80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf + 00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6 + 80 b0 45 c4 95 + ]; + + assigned-clocks = <&versa3 0>, <&versa3 1>, + <&versa3 2>, <&versa3 3>, + <&versa3 4>, <&versa3 5>; + assigned-clock-rates = <24000000>, <11289600>, + <11289600>, <12000000>, + <25000000>, <12288000>; + }; +}; + +#if PMOD_MTU3 +&mtu3 { + pinctrl-0 = <&mtu3_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +#if MTU3_COUNTER_Z_PHASE_SIGNAL +/* SDHI cd pin is muxed with counter Z phase signal */ +&sdhi1 { + status = "disabled"; +}; +#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */ + +&spi1 { + status = "disabled"; }; +#endif /* PMOD_MTU3 */ /* * To enable SCIF2 (SER0) on PMOD1 (CN7)