From: Andre Przywara Date: Wed, 18 Oct 2023 00:06:52 +0000 (+0100) Subject: sunxi: H616: Add OrangePi Zero 3 board support X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=d2e1cc69a24719e9939a84dc42bdf281af6ec35d;p=u-boot.git sunxi: H616: Add OrangePi Zero 3 board support The OrangePi Zero 3 is a small development board featuring the Allwinner H618 SoC, shipping with up to 4GB of DRAM, Gigabit Ethernet, a micro-HDMI connector and two USB sockets. The board uses LPDDR4 DRAM and an X-Powers AXP313a PMIC, support for which was recently added to U-Boot. Add a defconfig file selecting the right drivers and DRAM options. Since the .dts file was synced from the Linux kernel repo already, we just need to add one line to the Makefile to actually build the .dtb. The DRAM parameters were derived from the values found in the BSP DRAM drivers on the SPI NOR flash. Signed-off-by: Andre Przywara Tested-by: Mikhail Kalashnikov Tested-by: Bob McChesney Tested-by: Stephen Graf --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 1be08c5fdc..5fc888680b 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -835,6 +835,7 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \ sun50i-h6-tanix-tx6-mini.dtb dtb-$(CONFIG_MACH_SUN50I_H616) += \ sun50i-h616-orangepi-zero2.dtb \ + sun50i-h618-orangepi-zero3.dtb \ sun50i-h616-x96-mate.dtb dtb-$(CONFIG_MACH_SUN50I) += \ sun50i-a64-amarula-relic.dtb \ diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 0061437211..f556857a39 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -455,6 +455,11 @@ M: Jernej Skrabec S: Maintained F: configs/orangepi_zero2_defconfig +ORANGEPI ZERO 3 BOARD +M: Andre Przywara +S: Maintained +F: configs/orangepi_zero3_defconfig + ORANGEPI PC 2 BOARD M: Andre Przywara S: Maintained diff --git a/configs/orangepi_zero3_defconfig b/configs/orangepi_zero3_defconfig new file mode 100644 index 0000000000..5a019fed84 --- /dev/null +++ b/configs/orangepi_zero3_defconfig @@ -0,0 +1,32 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h618-orangepi-zero3" +CONFIG_SPL=y +CONFIG_DRAM_SUN50I_H616_DX_ODT=0x07070707 +CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e +CONFIG_DRAM_SUN50I_H616_CA_DRI=0x0e0e +CONFIG_DRAM_SUN50I_H616_ODT_EN=0xaaaaeeee +CONFIG_DRAM_SUN50I_H616_TPR6=0x44000000 +CONFIG_DRAM_SUN50I_H616_TPR10=0x402f6663 +CONFIG_DRAM_SUN50I_H616_TPR11=0x24242624 +CONFIG_DRAM_SUN50I_H616_TPR12=0x0f0f100f +CONFIG_MACH_SUN50I_H616=y +CONFIG_SUNXI_DRAM_H616_LPDDR4=y +CONFIG_DRAM_CLK=792 +CONFIG_USB1_VBUS_PIN="PC16" +CONFIG_R_I2C_ENABLE=y +CONFIG_SPL_SPI_SUNXI=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_I2C=y +CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_SYS_I2C_SLAVE=0x7f +CONFIG_SYS_I2C_SPEED=400000 +CONFIG_SPI_FLASH_ZBIT=y +CONFIG_PHY_MOTORCOMM=y +CONFIG_SUN8I_EMAC=y +CONFIG_AXP313_POWER=y +CONFIG_SPI=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_MUSB_GADGET=y