From: Neha Malcom Francis <n-francis@ti.com>
Date: Mon, 13 Nov 2023 04:30:22 +0000 (+0530)
Subject: dt-bindings: misc: Move esm-k3.txt to ti,j721e-esm.yaml
X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=d11f9f36da77e9e5a4c06ac690b209efb874ea14;p=u-boot.git

dt-bindings: misc: Move esm-k3.txt to ti,j721e-esm.yaml

Move esm-k3.txt to ti,j721e-esm.yaml in line with the devicetree
documentation in kernel.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---

diff --git a/doc/device-tree-bindings/misc/esm-k3.txt b/doc/device-tree-bindings/misc/esm-k3.txt
deleted file mode 100644
index 01c8b6b294..0000000000
--- a/doc/device-tree-bindings/misc/esm-k3.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Texas Instruments K3 ESM Binding
-======================
-
-ESM (Error Signaling Module) is an IP block on TI K3 devices that allows
-handling of safety events somewhat similar to what interrupt controller
-would do. The safety signals have their separate paths within the SoC,
-and they are handled by the ESM, which routes them to the proper
-destination, which can be system reset, interrupt controller, etc. In
-the simplest configuration the signals are just routed to reset the
-SoC.
-
-Required properties :
-- compatible	: "ti,j721e-esm"
-- ti,esm-pins	: integer array of esm events IDs to route to external event
-		  pin which can be used to reset the SoC. The array can
-		  have arbitrary amount of event IDs listed on it.
-
-Example
-=======
-
-	main_esm: esm@700000 {
-		compatible = "ti,j721e-esm";
-		reg = <0x0 0x700000 0x0 0x1000>;
-		ti,esm-pins = <344>, <345>;
-	};
diff --git a/doc/device-tree-bindings/misc/ti,j721e-esm.yaml b/doc/device-tree-bindings/misc/ti,j721e-esm.yaml
new file mode 100644
index 0000000000..0c9a844484
--- /dev/null
+++ b/doc/device-tree-bindings/misc/ti,j721e-esm.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/ti,j721e-esm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 ESM
+
+maintainers:
+  - Neha Malcom Francis <n-francis@ti.com>
+
+description:
+  The ESM (Error Signaling Module) is an IP block on TI K3 devices
+  that allows handling of safety events somewhat similar to what interrupt
+  controller would do. The safety signals have their separate paths within
+  the SoC, and they are handled by the ESM, which routes them to the proper
+  destination, which can be system reset, interrupt controller, etc. In the
+  simplest configuration the signals are just routed to reset the SoC.
+
+properties:
+  compatible:
+    const: ti,j721e-esm
+
+  reg:
+    maxItems: 1
+
+  ti,esm-pins:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      integer array of ESM interrupt pins to route to external event pin
+      which can be used to reset the SoC.
+    minItems: 1
+    maxItems: 255
+
+required:
+  - compatible
+  - reg
+  - ti,esm-pins
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        esm@700000 {
+            compatible = "ti,j721e-esm";
+            reg = <0x0 0x700000 0x0 0x1000>;
+            ti,esm-pins = <344>, <345>;
+        };
+    };