From: Simon Glass Date: Fri, 11 Sep 2020 02:21:13 +0000 (-0600) Subject: Kconfig: Move boot menu into common/ X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=cf298167685994a5c51213f07e32ab4644508c4c;p=u-boot.git Kconfig: Move boot menu into common/ Most of the boot options are in common/Kconfig but that file is already extremely large. Create a new Kconfig.boot to hold the boot options. Signed-off-by: Simon Glass --- diff --git a/Kconfig b/Kconfig index 34f17eb943..c385535a5c 100644 --- a/Kconfig +++ b/Kconfig @@ -432,347 +432,6 @@ config EXAMPLES endmenu # General setup -menu "Boot options" - -menu "Boot images" - -config ANDROID_BOOT_IMAGE - bool "Enable support for Android Boot Images" - default y if FASTBOOT - help - This enables support for booting images which use the Android - image format header. - -config FIT - bool "Support Flattened Image Tree" - select MD5 - select SHA1 - help - This option allows you to boot the new uImage structure, - Flattened Image Tree. FIT is formally a FDT, which can include - images of various types (kernel, FDT blob, ramdisk, etc.) - in a single blob. To boot this new uImage structure, - pass the address of the blob to the "bootm" command. - FIT is very flexible, supporting compression, multiple images, - multiple configurations, verification through hashing and also - verified boot (secure boot using RSA). - -if FIT - -config FIT_EXTERNAL_OFFSET - hex "FIT external data offset" - default 0x0 - help - This specifies a data offset in fit image. - The offset is from data payload offset to the beginning of - fit image header. When specifies a offset, specific data - could be put in the hole between data payload and fit image - header, such as CSF data on i.MX platform. - -config FIT_ENABLE_SHA256_SUPPORT - bool "Support SHA256 checksum of FIT image contents" - default y - select SHA256 - help - Enable this to support SHA256 checksum of FIT image contents. A - SHA256 checksum is a 256-bit (32-byte) hash value used to check that - the image contents have not been corrupted. - -config FIT_ENABLE_SHA384_SUPPORT - bool "Support SHA384 checksum of FIT image contents" - default n - select SHA384 - help - Enable this to support SHA384 checksum of FIT image contents. A - SHA384 checksum is a 384-bit (48-byte) hash value used to check that - the image contents have not been corrupted. Use this for the highest - security. - -config FIT_ENABLE_SHA512_SUPPORT - bool "Support SHA512 checksum of FIT image contents" - default n - select SHA512 - help - Enable this to support SHA512 checksum of FIT image contents. A - SHA512 checksum is a 512-bit (64-byte) hash value used to check that - the image contents have not been corrupted. - -config FIT_SIGNATURE - bool "Enable signature verification of FIT uImages" - depends on DM - select HASH - select RSA - select RSA_VERIFY - select IMAGE_SIGN_INFO - help - This option enables signature verification of FIT uImages, - using a hash signed and verified using RSA. If - CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive - hashing is available using hardware, then the RSA library will use - it. See doc/uImage.FIT/signature.txt for more details. - - WARNING: When relying on signed FIT images with a required signature - check the legacy image format is disabled by default, so that - unsigned images cannot be loaded. If a board needs the legacy image - format support in this case, enable it using - CONFIG_LEGACY_IMAGE_FORMAT. - -config FIT_SIGNATURE_MAX_SIZE - hex "Max size of signed FIT structures" - depends on FIT_SIGNATURE - default 0x10000000 - help - This option sets a max size in bytes for verified FIT uImages. - A sane value of 256MB protects corrupted DTB structures from overlapping - device memory. Assure this size does not extend past expected storage - space. - -config FIT_ENABLE_RSASSA_PSS_SUPPORT - bool "Support rsassa-pss signature scheme of FIT image contents" - depends on FIT_SIGNATURE - default n - help - Enable this to support the pss padding algorithm as described - in the rfc8017 (https://tools.ietf.org/html/rfc8017). - -config FIT_CIPHER - bool "Enable ciphering data in a FIT uImages" - depends on DM - select AES - help - Enable the feature of data ciphering/unciphering in the tool mkimage - and in the u-boot support of the FIT image. - -config FIT_VERBOSE - bool "Show verbose messages when FIT images fail" - help - Generally a system will have valid FIT images so debug messages - are a waste of code space. If you are debugging your images then - you can enable this option to get more verbose information about - failures. - -config FIT_BEST_MATCH - bool "Select the best match for the kernel device tree" - help - When no configuration is explicitly selected, default to the - one whose fdt's compatibility field best matches that of - U-Boot itself. A match is considered "best" if it matches the - most specific compatibility entry of U-Boot's fdt's root node. - The order of entries in the configuration's fdt is ignored. - -config FIT_IMAGE_POST_PROCESS - bool "Enable post-processing of FIT artifacts after loading by U-Boot" - depends on TI_SECURE_DEVICE - help - Allows doing any sort of manipulation to blobs after they got extracted - from FIT images like stripping off headers or modifying the size of the - blob, verification, authentication, decryption etc. in a platform or - board specific way. In order to use this feature a platform or board- - specific implementation of board_fit_image_post_process() must be - provided. Also, anything done during this post-processing step would - need to be comprehended in how the images were prepared before being - injected into the FIT creation (i.e. the blobs would have been pre- - processed before being added to the FIT image). - -if SPL - -config SPL_FIT - bool "Support Flattened Image Tree within SPL" - depends on SPL - select SPL_OF_LIBFDT - -config SPL_FIT_PRINT - bool "Support FIT printing within SPL" - depends on SPL_FIT - help - Support printing the content of the fitImage in a verbose manner in SPL. - -config SPL_FIT_SIGNATURE - bool "Enable signature verification of FIT firmware within SPL" - depends on SPL_DM - select SPL_FIT - select SPL_CRYPTO_SUPPORT - select SPL_HASH_SUPPORT - select SPL_RSA - select SPL_RSA_VERIFY - select SPL_IMAGE_SIGN_INFO - -config SPL_LOAD_FIT - bool "Enable SPL loading U-Boot as a FIT (basic fitImage features)" - select SPL_FIT - help - Normally with the SPL framework a legacy image is generated as part - of the build. This contains U-Boot along with information as to - where it should be loaded. This option instead enables generation - of a FIT (Flat Image Tree) which provides more flexibility. In - particular it can handle selecting from multiple device tree - and passing the correct one to U-Boot. - -config SPL_LOAD_FIT_ADDRESS - hex "load address of fit image" - depends on SPL_LOAD_FIT - default 0x0 - help - Specify the load address of the fit image that will be loaded - by SPL. - -config SPL_LOAD_FIT_APPLY_OVERLAY - bool "Enable SPL applying DT overlays from FIT" - depends on SPL_LOAD_FIT - select OF_LIBFDT_OVERLAY - help - The device tree is loaded from the FIT image. Allow the SPL is to - also load device-tree overlays from the FIT image an apply them - over the device tree. - -config SPL_LOAD_FIT_APPLY_OVERLAY_BUF_SZ - depends on SPL_LOAD_FIT_APPLY_OVERLAY - default 0x10000 - hex "size of temporary buffer used to load the overlays" - help - The size of the area where the overlays will be loaded and - uncompress. Must be at least as large as biggest overlay - (uncompressed) - -config SPL_LOAD_FIT_FULL - bool "Enable SPL loading U-Boot as a FIT (full fitImage features)" - select SPL_FIT - help - Normally with the SPL framework a legacy image is generated as part - of the build. This contains U-Boot along with information as to - where it should be loaded. This option instead enables generation - of a FIT (Flat Image Tree) which provides more flexibility. In - particular it can handle selecting from multiple device tree - and passing the correct one to U-Boot. - -config SPL_FIT_IMAGE_POST_PROCESS - bool "Enable post-processing of FIT artifacts after loading by the SPL" - depends on SPL_LOAD_FIT - help - Allows doing any sort of manipulation to blobs after they got extracted - from the U-Boot FIT image like stripping off headers or modifying the - size of the blob, verification, authentication, decryption etc. in a - platform or board specific way. In order to use this feature a platform - or board-specific implementation of board_fit_image_post_process() must - be provided. Also, anything done during this post-processing step would - need to be comprehended in how the images were prepared before being - injected into the FIT creation (i.e. the blobs would have been pre- - processed before being added to the FIT image). - -config SPL_FIT_SOURCE - string ".its source file for U-Boot FIT image" - depends on SPL_FIT - help - Specifies a (platform specific) FIT source file to generate the - U-Boot FIT image. This could specify further image to load and/or - execute. - -config USE_SPL_FIT_GENERATOR - bool "Use a script to generate the .its script" - default y if SPL_FIT && !ARCH_SUNXI - -config SPL_FIT_GENERATOR - string ".its file generator script for U-Boot FIT image" - depends on USE_SPL_FIT_GENERATOR - default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP - default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT && ARCH_ZYNQMP - default "arch/riscv/lib/mkimage_fit_opensbi.sh" if SPL_LOAD_FIT && RISCV - help - Specifies a (platform specific) script file to generate the FIT - source file used to build the U-Boot FIT image file. This gets - passed a list of supported device tree file stub names to - include in the generated image. - -endif # SPL - -endif # FIT - -config LEGACY_IMAGE_FORMAT - bool "Enable support for the legacy image format" - default y if !FIT_SIGNATURE - help - This option enables the legacy image format. It is enabled by - default for backward compatibility, unless FIT_SIGNATURE is - set where it is disabled so that unsigned images cannot be - loaded. If a board needs the legacy image format support in this - case, enable it here. - -config OF_BOARD_SETUP - bool "Set up board-specific details in device tree before boot" - depends on OF_LIBFDT - help - This causes U-Boot to call ft_board_setup() before booting into - the Operating System. This function can set up various - board-specific information in the device tree for use by the OS. - The device tree is then passed to the OS. - -config OF_SYSTEM_SETUP - bool "Set up system-specific details in device tree before boot" - depends on OF_LIBFDT - help - This causes U-Boot to call ft_system_setup() before booting into - the Operating System. This function can set up various - system-specific information in the device tree for use by the OS. - The device tree is then passed to the OS. - -config OF_STDOUT_VIA_ALIAS - bool "Update the device-tree stdout alias from U-Boot" - depends on OF_LIBFDT - help - This uses U-Boot's serial alias from the aliases node to update - the device tree passed to the OS. The "linux,stdout-path" property - in the chosen node is set to point to the correct serial node. - This option currently references CONFIG_CONS_INDEX, which is - incorrect when used with device tree as this option does not - exist / should not be used. - -config SYS_EXTRA_OPTIONS - string "Extra Options (DEPRECATED)" - help - The old configuration infrastructure (= mkconfig + boards.cfg) - provided the extra options field. If you have something like - "HAS_BAR,BAZ=64", the optional options - #define CONFIG_HAS - #define CONFIG_BAZ 64 - will be defined in include/config.h. - This option was prepared for the smooth migration from the old - configuration to Kconfig. Since this option will be removed sometime, - new boards should not use this option. - -config HAVE_SYS_TEXT_BASE - bool - depends on !NIOS2 && !XTENSA - depends on !EFI_APP - default y - -config SYS_TEXT_BASE - depends on HAVE_SYS_TEXT_BASE - default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3 - default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S - default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I - default 0x42e00000 if ARCH_SUNXI && MACH_SUN8I_V3S - hex "Text Base" - help - The address in memory that U-Boot will be running from, initially. - -config SYS_CLK_FREQ - depends on ARC || ARCH_SUNXI || MPC83xx - int "CPU clock frequency" - help - TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture - -config ARCH_FIXUP_FDT_MEMORY - bool "Enable arch_fixup_memory_banks() call" - default y - help - Enable FDT memory map syncup before OS boot. This feature can be - used for booting OS with different memory setup where the part of - the memory location should be used for different purpose. - -endmenu # Boot images - -endmenu # Booting - source "api/Kconfig" source "common/Kconfig" diff --git a/common/Kconfig b/common/Kconfig index 9c20a9738e..f234240ec9 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -1,3 +1,5 @@ +source "common/Kconfig.boot" + menu "Boot timing" config BOOTSTAGE diff --git a/common/Kconfig.boot b/common/Kconfig.boot new file mode 100644 index 0000000000..6f9b26e7ae --- /dev/null +++ b/common/Kconfig.boot @@ -0,0 +1,340 @@ +menu "Boot options" + +menu "Boot images" + +config ANDROID_BOOT_IMAGE + bool "Enable support for Android Boot Images" + default y if FASTBOOT + help + This enables support for booting images which use the Android + image format header. + +config FIT + bool "Support Flattened Image Tree" + select MD5 + select SHA1 + help + This option allows you to boot the new uImage structure, + Flattened Image Tree. FIT is formally a FDT, which can include + images of various types (kernel, FDT blob, ramdisk, etc.) + in a single blob. To boot this new uImage structure, + pass the address of the blob to the "bootm" command. + FIT is very flexible, supporting compression, multiple images, + multiple configurations, verification through hashing and also + verified boot (secure boot using RSA). + +if FIT + +config FIT_EXTERNAL_OFFSET + hex "FIT external data offset" + default 0x0 + help + This specifies a data offset in fit image. + The offset is from data payload offset to the beginning of + fit image header. When specifies a offset, specific data + could be put in the hole between data payload and fit image + header, such as CSF data on i.MX platform. + +config FIT_ENABLE_SHA256_SUPPORT + bool "Support SHA256 checksum of FIT image contents" + default y + select SHA256 + help + Enable this to support SHA256 checksum of FIT image contents. A + SHA256 checksum is a 256-bit (32-byte) hash value used to check that + the image contents have not been corrupted. + +config FIT_ENABLE_SHA384_SUPPORT + bool "Support SHA384 checksum of FIT image contents" + default n + select SHA384 + help + Enable this to support SHA384 checksum of FIT image contents. A + SHA384 checksum is a 384-bit (48-byte) hash value used to check that + the image contents have not been corrupted. Use this for the highest + security. + +config FIT_ENABLE_SHA512_SUPPORT + bool "Support SHA512 checksum of FIT image contents" + default n + select SHA512 + help + Enable this to support SHA512 checksum of FIT image contents. A + SHA512 checksum is a 512-bit (64-byte) hash value used to check that + the image contents have not been corrupted. + +config FIT_SIGNATURE + bool "Enable signature verification of FIT uImages" + depends on DM + select HASH + select RSA + select RSA_VERIFY + select IMAGE_SIGN_INFO + help + This option enables signature verification of FIT uImages, + using a hash signed and verified using RSA. If + CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive + hashing is available using hardware, then the RSA library will use + it. See doc/uImage.FIT/signature.txt for more details. + + WARNING: When relying on signed FIT images with a required signature + check the legacy image format is disabled by default, so that + unsigned images cannot be loaded. If a board needs the legacy image + format support in this case, enable it using + CONFIG_LEGACY_IMAGE_FORMAT. + +config FIT_SIGNATURE_MAX_SIZE + hex "Max size of signed FIT structures" + depends on FIT_SIGNATURE + default 0x10000000 + help + This option sets a max size in bytes for verified FIT uImages. + A sane value of 256MB protects corrupted DTB structures from overlapping + device memory. Assure this size does not extend past expected storage + space. + +config FIT_ENABLE_RSASSA_PSS_SUPPORT + bool "Support rsassa-pss signature scheme of FIT image contents" + depends on FIT_SIGNATURE + default n + help + Enable this to support the pss padding algorithm as described + in the rfc8017 (https://tools.ietf.org/html/rfc8017). + +config FIT_CIPHER + bool "Enable ciphering data in a FIT uImages" + depends on DM + select AES + help + Enable the feature of data ciphering/unciphering in the tool mkimage + and in the u-boot support of the FIT image. + +config FIT_VERBOSE + bool "Show verbose messages when FIT images fail" + help + Generally a system will have valid FIT images so debug messages + are a waste of code space. If you are debugging your images then + you can enable this option to get more verbose information about + failures. + +config FIT_BEST_MATCH + bool "Select the best match for the kernel device tree" + help + When no configuration is explicitly selected, default to the + one whose fdt's compatibility field best matches that of + U-Boot itself. A match is considered "best" if it matches the + most specific compatibility entry of U-Boot's fdt's root node. + The order of entries in the configuration's fdt is ignored. + +config FIT_IMAGE_POST_PROCESS + bool "Enable post-processing of FIT artifacts after loading by U-Boot" + depends on TI_SECURE_DEVICE + help + Allows doing any sort of manipulation to blobs after they got extracted + from FIT images like stripping off headers or modifying the size of the + blob, verification, authentication, decryption etc. in a platform or + board specific way. In order to use this feature a platform or board- + specific implementation of board_fit_image_post_process() must be + provided. Also, anything done during this post-processing step would + need to be comprehended in how the images were prepared before being + injected into the FIT creation (i.e. the blobs would have been pre- + processed before being added to the FIT image). + +if SPL + +config SPL_FIT + bool "Support Flattened Image Tree within SPL" + depends on SPL + select SPL_OF_LIBFDT + +config SPL_FIT_PRINT + bool "Support FIT printing within SPL" + depends on SPL_FIT + help + Support printing the content of the fitImage in a verbose manner in SPL. + +config SPL_FIT_SIGNATURE + bool "Enable signature verification of FIT firmware within SPL" + depends on SPL_DM + select SPL_FIT + select SPL_CRYPTO_SUPPORT + select SPL_HASH_SUPPORT + select SPL_RSA + select SPL_RSA_VERIFY + select SPL_IMAGE_SIGN_INFO + +config SPL_LOAD_FIT + bool "Enable SPL loading U-Boot as a FIT (basic fitImage features)" + select SPL_FIT + help + Normally with the SPL framework a legacy image is generated as part + of the build. This contains U-Boot along with information as to + where it should be loaded. This option instead enables generation + of a FIT (Flat Image Tree) which provides more flexibility. In + particular it can handle selecting from multiple device tree + and passing the correct one to U-Boot. + +config SPL_LOAD_FIT_ADDRESS + hex "load address of fit image" + depends on SPL_LOAD_FIT + default 0x0 + help + Specify the load address of the fit image that will be loaded + by SPL. + +config SPL_LOAD_FIT_APPLY_OVERLAY + bool "Enable SPL applying DT overlays from FIT" + depends on SPL_LOAD_FIT + select OF_LIBFDT_OVERLAY + help + The device tree is loaded from the FIT image. Allow the SPL is to + also load device-tree overlays from the FIT image an apply them + over the device tree. + +config SPL_LOAD_FIT_APPLY_OVERLAY_BUF_SZ + depends on SPL_LOAD_FIT_APPLY_OVERLAY + default 0x10000 + hex "size of temporary buffer used to load the overlays" + help + The size of the area where the overlays will be loaded and + uncompress. Must be at least as large as biggest overlay + (uncompressed) + +config SPL_LOAD_FIT_FULL + bool "Enable SPL loading U-Boot as a FIT (full fitImage features)" + select SPL_FIT + help + Normally with the SPL framework a legacy image is generated as part + of the build. This contains U-Boot along with information as to + where it should be loaded. This option instead enables generation + of a FIT (Flat Image Tree) which provides more flexibility. In + particular it can handle selecting from multiple device tree + and passing the correct one to U-Boot. + +config SPL_FIT_IMAGE_POST_PROCESS + bool "Enable post-processing of FIT artifacts after loading by the SPL" + depends on SPL_LOAD_FIT + help + Allows doing any sort of manipulation to blobs after they got extracted + from the U-Boot FIT image like stripping off headers or modifying the + size of the blob, verification, authentication, decryption etc. in a + platform or board specific way. In order to use this feature a platform + or board-specific implementation of board_fit_image_post_process() must + be provided. Also, anything done during this post-processing step would + need to be comprehended in how the images were prepared before being + injected into the FIT creation (i.e. the blobs would have been pre- + processed before being added to the FIT image). + +config SPL_FIT_SOURCE + string ".its source file for U-Boot FIT image" + depends on SPL_FIT + help + Specifies a (platform specific) FIT source file to generate the + U-Boot FIT image. This could specify further image to load and/or + execute. + +config USE_SPL_FIT_GENERATOR + bool "Use a script to generate the .its script" + default y if SPL_FIT && !ARCH_SUNXI + +config SPL_FIT_GENERATOR + string ".its file generator script for U-Boot FIT image" + depends on USE_SPL_FIT_GENERATOR + default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP + default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT && ARCH_ZYNQMP + default "arch/riscv/lib/mkimage_fit_opensbi.sh" if SPL_LOAD_FIT && RISCV + help + Specifies a (platform specific) script file to generate the FIT + source file used to build the U-Boot FIT image file. This gets + passed a list of supported device tree file stub names to + include in the generated image. + +endif # SPL + +endif # FIT + +config LEGACY_IMAGE_FORMAT + bool "Enable support for the legacy image format" + default y if !FIT_SIGNATURE + help + This option enables the legacy image format. It is enabled by + default for backward compatibility, unless FIT_SIGNATURE is + set where it is disabled so that unsigned images cannot be + loaded. If a board needs the legacy image format support in this + case, enable it here. + +config OF_BOARD_SETUP + bool "Set up board-specific details in device tree before boot" + depends on OF_LIBFDT + help + This causes U-Boot to call ft_board_setup() before booting into + the Operating System. This function can set up various + board-specific information in the device tree for use by the OS. + The device tree is then passed to the OS. + +config OF_SYSTEM_SETUP + bool "Set up system-specific details in device tree before boot" + depends on OF_LIBFDT + help + This causes U-Boot to call ft_system_setup() before booting into + the Operating System. This function can set up various + system-specific information in the device tree for use by the OS. + The device tree is then passed to the OS. + +config OF_STDOUT_VIA_ALIAS + bool "Update the device-tree stdout alias from U-Boot" + depends on OF_LIBFDT + help + This uses U-Boot's serial alias from the aliases node to update + the device tree passed to the OS. The "linux,stdout-path" property + in the chosen node is set to point to the correct serial node. + This option currently references CONFIG_CONS_INDEX, which is + incorrect when used with device tree as this option does not + exist / should not be used. + +config SYS_EXTRA_OPTIONS + string "Extra Options (DEPRECATED)" + help + The old configuration infrastructure (= mkconfig + boards.cfg) + provided the extra options field. If you have something like + "HAS_BAR,BAZ=64", the optional options + #define CONFIG_HAS + #define CONFIG_BAZ 64 + will be defined in include/config.h. + This option was prepared for the smooth migration from the old + configuration to Kconfig. Since this option will be removed sometime, + new boards should not use this option. + +config HAVE_SYS_TEXT_BASE + bool + depends on !NIOS2 && !XTENSA + depends on !EFI_APP + default y + +config SYS_TEXT_BASE + depends on HAVE_SYS_TEXT_BASE + default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3 + default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S + default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I + default 0x42e00000 if ARCH_SUNXI && MACH_SUN8I_V3S + hex "Text Base" + help + The address in memory that U-Boot will be running from, initially. + +config SYS_CLK_FREQ + depends on ARC || ARCH_SUNXI || MPC83xx + int "CPU clock frequency" + help + TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture + +config ARCH_FIXUP_FDT_MEMORY + bool "Enable arch_fixup_memory_banks() call" + default y + help + Enable FDT memory map syncup before OS boot. This feature can be + used for booting OS with different memory setup where the part of + the memory location should be used for different purpose. + +endmenu # Boot images + +endmenu # Booting