From: Aleksandar Gerasimovski Date: Fri, 10 Dec 2021 10:09:01 +0000 (+0100) Subject: configs/seli8: enable field fail-safe u-boot update X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=ced3456f8c5cc82fdde66744dea3e15c895a16ed;p=u-boot.git configs/seli8: enable field fail-safe u-boot update Field fail-safe u-boot update for pg-wcom-ls102x designs is introduced with patch 81fb05e. This patch enables already added support by: - Defining default u-boot build as bootpackage (factory) image. - Defining u-boot update image location according to the SELI8 NOR layout. - Extending mtd partitions according defined SELI8 NOR layout. Signed-off-by: Aleksandar Gerasimovski Reviewed-by: Priyanka Jain --- diff --git a/configs/pg_wcom_seli8_defconfig b/configs/pg_wcom_seli8_defconfig index 3eaf7fde9c..9f7f2dcf5b 100644 --- a/configs/pg_wcom_seli8_defconfig +++ b/configs/pg_wcom_seli8_defconfig @@ -1,7 +1,10 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_TARGET_PG_WCOM_SELI8=y +CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y +CONFIG_PG_WCOM_UBOOT_BOOTPACKAGE=y CONFIG_SYS_TEXT_BASE=0x60100000 +CONFIG_PG_WCOM_UBOOT_UPDATE_TEXT_BASE=0x60240000 CONFIG_SYS_MALLOC_LEN=0x1004000 CONFIG_NR_DRAM_BANKS=1 CONFIG_KM_DEF_NETDEV="eth2" @@ -42,7 +45,7 @@ CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_CRAMFS=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nor0=60000000.nor,nand0=68000000.flash" -CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),-(ubi0);68000000.flash:-(ubi1)" +CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),128k(redenvred),128k(redenv),1m(redu-boot),-(ubi0);68000000.flash:-(ubi1)" CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y