From: Jernej Skrabec Date: Mon, 11 Jan 2021 20:11:41 +0000 (+0100) Subject: sunxi: add support for H616 uart0 X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=c13d98b77eb4746f2463b23b0adce66153705add;p=u-boot.git sunxi: add support for H616 uart0 This port is used for debug terminal on all known H616 boards. Reviewed-by: Samuel Holland Signed-off-by: Jernej Skrabec Reviewed-by: Andre Przywara Signed-off-by: Andre Przywara --- diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index f817d328f4..cdb7dbd5b8 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -206,6 +206,7 @@ enum sunxi_gpio_number { #define SUN6I_GPH_UART0 2 #define SUN9I_GPH_UART0 2 #define SUN50I_H6_GPH_UART0 2 +#define SUN50I_H616_GPH_UART0 2 #define SUNXI_GPI_SDC3 2 #define SUN7I_GPI_TWI3 3 diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index d90c7c04ec..ae6bc656d9 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -116,6 +116,10 @@ static int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPH(0), SUN50I_H6_GPH_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPH(1), SUN50I_H6_GPH_UART0); sunxi_gpio_set_pull(SUNXI_GPH(1), SUNXI_GPIO_PULL_UP); +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN50I_H616) + sunxi_gpio_set_cfgpin(SUNXI_GPH(0), SUN50I_H616_GPH_UART0); + sunxi_gpio_set_cfgpin(SUNXI_GPH(1), SUN50I_H616_GPH_UART0); + sunxi_gpio_set_pull(SUNXI_GPH(1), SUNXI_GPIO_PULL_UP); #elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_A83T) sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0);