From: Ash Charles Date: Wed, 21 May 2014 21:04:50 +0000 (-0700) Subject: OMAP3: overo: eliminate hard-coded partition offsets X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=bcb2cf1b5af517910f7a0bf9748751247ff704aa;p=u-boot.git OMAP3: overo: eliminate hard-coded partition offsets The linux kernel is at nand0,3 using the current layout, but is best accessed through the partition label "linux". Since CONFIG_CMD_MTDPARTS is defined the CONFIG_JFFS2 settings are unreferenced; use "setenv partition rootfs" to set the default mtd partition for jffs2. Signed-off-by: Peter A. Bigot Tested-by: Ash Charles --- diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 321e110f4a..706c8cc2c4 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -154,14 +154,6 @@ /* at CS0 */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ - /* partition */ - /* Environment information */ #define CONFIG_BOOTDELAY 5 @@ -207,7 +199,7 @@ "bootm ${loadaddr}\0" \ "nandboot=echo Booting from nand ...; " \ "run nandargs; " \ - "nand read ${loadaddr} 280000 400000; " \ + "nand read ${loadaddr} linux; " \ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \