From: Chen-Yu Tsai Date: Fri, 3 May 2019 02:27:40 +0000 (+0800) Subject: sunxi: Enable EMAC on the Cubietruck Plus X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=b39eab2ffd55690ee2cd6e82bb30904b6faf45e5;p=u-boot.git sunxi: Enable EMAC on the Cubietruck Plus The Cubietruck Plus has an RTL8211E PHY connected to the EMAC using RGMII. The PHY is powered by DLDO4 @ 3.3V, while the I/O pins are powered by DLDO3 @ 2.5V. This patch enables the EMAC and Realtek PHY drivers in the defconfig. The device tree file already has the EMAC enabled. Signed-off-by: Chen-Yu Tsai Reviewed-by: Jagan Teki --- diff --git a/configs/Cubietruck_plus_defconfig b/configs/Cubietruck_plus_defconfig index 869bffcfca..044af12779 100644 --- a/configs/Cubietruck_plus_defconfig +++ b/configs/Cubietruck_plus_defconfig @@ -20,6 +20,8 @@ CONFIG_CONSOLE_MUX=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-cubietruck-plus" +CONFIG_PHY_REALTEK=y +CONFIG_SUN8I_EMAC=y CONFIG_AXP_DLDO3_VOLT=2500 CONFIG_AXP_DLDO4_VOLT=3300 CONFIG_AXP_FLDO1_VOLT=1200