From: Eric Nelson Date: Sun, 30 Oct 2016 23:33:47 +0000 (-0700) Subject: mx6: ddr: allow 32 cycles for DQS gating calibration X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=b33f74ead4dfd1ec0b500dc3d1cfef0e308b45c3;p=u-boot.git mx6: ddr: allow 32 cycles for DQS gating calibration The DDR calibration code is only setting flag DG_CMP_CYC (DQS gating sample cycle) for the first PHY. Set the 32-cycle flag for both PHYs and clear when done so the MPDGCTRL0 output value isn't polluted with calibration artifacts. Signed-off-by: Eric Nelson Reviewed-by: Marek Vasut --- diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c index 7beb7eabf7..b15f376da4 100644 --- a/arch/arm/cpu/armv7/mx6/ddr.c +++ b/arch/arm/cpu/armv7/mx6/ddr.c @@ -347,6 +347,8 @@ int mmdc_do_dqs_calibration(void) * 16 before comparing read data. */ setbits_le32(&mmdc0->mpdgctrl0, 1 << 30); + if (sysinfo->dsize == 2) + setbits_le32(&mmdc1->mpdgctrl0, 1 << 30); /* Set bit 28 to start automatic read DQS gating calibration */ setbits_le32(&mmdc0->mpdgctrl0, 5 << 28); @@ -365,6 +367,11 @@ int mmdc_do_dqs_calibration(void) if ((bus_size == 0x2) && (readl(&mmdc1->mpdgctrl0) & 0x00001000)) errors |= 2; + /* now disable mpdgctrl0[DG_CMP_CYC] */ + clrbits_le32(&mmdc0->mpdgctrl0, 1 << 30); + if (sysinfo->dsize == 2) + clrbits_le32(&mmdc1->mpdgctrl0, 1 << 30); + /* * DQS gating absolute offset should be modified from * reflecting (HW_DG_LOWx + HW_DG_UPx)/2 to