From: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Date: Fri, 8 Jul 2022 09:21:59 +0000 (+0200)
Subject: usb: dwc3: Add support to reset usb ULPI phy
X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=b252d79b0936d60b0c6c69e71b0233e58f9c961e;p=u-boot.git

usb: dwc3: Add support to reset usb ULPI phy

When usb PHY initialization is done, the PHY need to be reset.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
---

diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c
index c5310e465c..466b25a0c3 100644
--- a/drivers/usb/dwc3/dwc3-generic.c
+++ b/drivers/usb/dwc3/dwc3-generic.c
@@ -26,6 +26,7 @@
 #include <reset.h>
 #include <clk.h>
 #include <usb/xhci.h>
+#include <asm/gpio.h>
 
 struct dwc3_glue_data {
 	struct clk_bulk		clks;
@@ -43,6 +44,7 @@ struct dwc3_generic_priv {
 	void *base;
 	struct dwc3 dwc3;
 	struct phy_bulk phys;
+	struct gpio_desc ulpi_reset;
 };
 
 struct dwc3_generic_host_priv {
@@ -78,6 +80,27 @@ static int dwc3_generic_probe(struct udevice *dev,
 	if (rc && rc != -ENOTSUPP)
 		return rc;
 
+	if (CONFIG_IS_ENABLED(DM_GPIO) &&
+	    device_is_compatible(dev->parent, "xlnx,zynqmp-dwc3")) {
+		rc = gpio_request_by_name(dev->parent, "reset-gpios", 0,
+					  &priv->ulpi_reset, GPIOD_ACTIVE_LOW);
+		if (rc)
+			return rc;
+
+		/* Toggle ulpi to reset the phy. */
+		rc = dm_gpio_set_value(&priv->ulpi_reset, 1);
+		if (rc)
+			return rc;
+
+		mdelay(5);
+
+		rc = dm_gpio_set_value(&priv->ulpi_reset, 0);
+		if (rc)
+			return rc;
+
+		mdelay(5);
+	}
+
 	if (device_is_compatible(dev->parent, "rockchip,rk3399-dwc3"))
 		reset_deassert_bulk(&glue->resets);
 
@@ -99,6 +122,13 @@ static int dwc3_generic_remove(struct udevice *dev,
 {
 	struct dwc3 *dwc3 = &priv->dwc3;
 
+	if (CONFIG_IS_ENABLED(DM_GPIO) &&
+	    device_is_compatible(dev->parent, "xlnx,zynqmp-dwc3")) {
+		struct gpio_desc *ulpi_reset = &priv->ulpi_reset;
+
+		dm_gpio_free(ulpi_reset->dev, ulpi_reset);
+	}
+
 	dwc3_remove(dwc3);
 	dwc3_shutdown_phy(dev, &priv->phys);
 	unmap_physmem(dwc3->regs, MAP_NOCACHE);