From: Aleksandar Gerasimovski Date: Tue, 8 Jun 2021 14:16:28 +0000 (+0000) Subject: board/km: add support for expu1 design based on nxp X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=a7fd6fa1c277ed667d61de4e366fe034def4800a;p=u-boot.git board/km: add support for expu1 design based on nxp The EXPU1 design is a new 40G capable ethernet service unit card for Hitachi-Powergrids wired-com product lines. The base SoC is same as for already added SELI8 card, consequently the already added u-boot support for SELI8 is reused. Signed-off-by: Rainer Boschung Signed-off-by: Aleksandar Gerasimovski [Fixed new line error at EOF] Signed-off-by: Priyanka Jain --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 31d687ea01..c3e8bd7f39 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1491,6 +1491,24 @@ config TARGET_PG_WCOM_SELI8 SELI8 is a QorIQ LS1021a based service unit card used in XMC20 and FOX615 product families. +config TARGET_PG_WCOM_EXPU1 + bool "Support Hitachi-Powergrids EXPU1 service unit card" + select ARCH_LS1021A + select ARCH_SUPPORT_PSCI + select BOARD_EARLY_INIT_F + select BOARD_LATE_INIT + select CPU_V7A + select CPU_V7_HAS_NONSEC + select CPU_V7_HAS_VIRT + select SYS_FSL_DDR + select FSL_DDR_INTERACTIVE + select VENDOR_KM + imply SCSI + help + Support for Hitachi-Powergrids EXPU1 service unit card. + EXPU1 is a QorIQ LS1021a based service unit card used + in XMC20 and FOX615 product families. + config TARGET_LS1021ATSN bool "Support ls1021atsn" select ARCH_LS1021A diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 096068261d..0d14394166 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -411,6 +411,7 @@ dtb-$(CONFIG_ARCH_LS1021A) += ls1021a-qds-duart.dtb \ ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb \ ls1021a-iot-duart.dtb ls1021a-tsn.dtb dtb-$(CONFIG_TARGET_PG_WCOM_SELI8) += ls1021a-pg-wcom-seli8.dtb +dtb-$(CONFIG_TARGET_PG_WCOM_EXPU1) += ls1021a-pg-wcom-expu1.dtb dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \ fsl-ls2080a-qds-42-x.dtb \ diff --git a/arch/arm/dts/ls1021a-pg-wcom-expu1.dts b/arch/arm/dts/ls1021a-pg-wcom-expu1.dts new file mode 100644 index 0000000000..33456b7c38 --- /dev/null +++ b/arch/arm/dts/ls1021a-pg-wcom-expu1.dts @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Hitachi ABB Power Grids EXPU1 board device tree source + * + * Copyright 2020 Hitachi ABB Power Grids + * + * Copyright 2013-2015 Freescale Semiconductor, Inc. + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "EXPU1 Service Unit for XMC and FOX"; + + aliases { + enet2-rgmii-debug-phy = &debug_phy; + }; + + chosen { + stdout-path = &uart0; + }; +}; + +&enet0 { + status = "okay"; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&enet1 { + status = "okay"; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&enet2 { + phy-handle = <&debug_phy>; + phy-connection-type = "rgmii-id"; + max-speed = <100>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&dspi1 { + bus-num = <0>; + status = "okay"; + zl30343@0 { + compatible = "gen,spidev", "zarlink,zl30343"; + reg = <0>; + spi-max-frequency = <8000000>; + }; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NOR Flash on board */ + ranges = <0x0 0x0 0x60000000 0x04000000>; + status = "okay"; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "rcw"; + reg = <0x0 0x20000>; + read-only; + }; + partition@20000 { + label = "qe"; + reg = <0x20000 0x20000>; + }; + /* ZL30343 init data to be added here */ + partition@40000 { + label = "envred"; + reg = <0x40000 0x20000>; + }; + partition@60000 { + label = "env"; + reg = <0x60000 0x20000>; + }; + partition@100000 { + label = "u-boot"; + reg = <0x100000 0x100000>; + }; + partition@200000 { + label = "ubi0"; + reg = <0x200000 0x3E00000>; + }; + }; +}; + +&mdio0 { + debug_phy: ethernet-phy@11 { + reg = <0x11>; + }; + + tbi0: tbi-phy@0xb { + reg = <0xb>; + device_type = "tbi-phy"; + }; +}; + +&mdio1 { + tbi1: tbi-phy@0xd { + reg = <0xd>; + device_type = "tbi-phy"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig index 86a667067d..3a6c63b774 100644 --- a/board/keymile/Kconfig +++ b/board/keymile/Kconfig @@ -64,6 +64,13 @@ config SYS_PAX_BASE help IFC Base Address for PAXx FPGA. +config SYS_CLIPS_BASE + hex "CLIPS IFC Base Address" + default 0x78000000 + depends on ARCH_LS1021A + help + IFC Base Address for CLIPS FPGA. + config KM_CONSOLE_TTY string "KM Console" default "ttyS0" diff --git a/board/keymile/pg-wcom-ls102xa/Kconfig b/board/keymile/pg-wcom-ls102xa/Kconfig index 15c009dbe8..f0b5ceabb6 100644 --- a/board/keymile/pg-wcom-ls102xa/Kconfig +++ b/board/keymile/pg-wcom-ls102xa/Kconfig @@ -17,3 +17,23 @@ config BOARD_SPECIFIC_OPTIONS imply FS_CRAMFS endif + +if TARGET_PG_WCOM_EXPU1 + +config SYS_BOARD + default "pg-wcom-ls102xa" + +config SYS_VENDOR + default "keymile" + +config SYS_SOC + default "ls102xa" + +config SYS_CONFIG_NAME + default "pg-wcom-expu1" + +config BOARD_SPECIFIC_OPTIONS + def_bool y + imply FS_CRAMFS + +endif diff --git a/board/keymile/pg-wcom-ls102xa/MAINTAINERS b/board/keymile/pg-wcom-ls102xa/MAINTAINERS index e1bc90a7e6..26b202316c 100644 --- a/board/keymile/pg-wcom-ls102xa/MAINTAINERS +++ b/board/keymile/pg-wcom-ls102xa/MAINTAINERS @@ -6,5 +6,8 @@ S: Maintained F: board/keymile/pg-wcom-ls102xa/ F: include/configs/km/pg-wcom-ls102xa.h F: include/configs/pg-wcom-seli8.h +F: include/configs/pg-wcom-expu1.h F: configs/pg_wcom_seli8_defconfig +F: configs/pg_wcom_expu1_defconfig F: arch/arm/dts/ls1021a-pg-wcom-seli8.dts +F: arch/arm/dts/ls1021a-pg-wcom-expu1.dts diff --git a/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c b/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c index 6b0e9631b3..69b5d211ba 100644 --- a/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c +++ b/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c @@ -70,16 +70,29 @@ int board_early_init_f(void) /* QRIO Configuration */ qrio_uprstreq(UPREQ_CORE_RST); - if (IS_ENABLED(CONFIG_TARGET_PG_WCOM_SELI8)) { - qrio_prstcfg(KM_LIU_RST, PRSTCFG_POWUP_UNIT_RST); - qrio_wdmask(KM_LIU_RST, true); +#if CONFIG_IS_ENABLED(TARGET_PG_WCOM_SELI8) + qrio_prstcfg(KM_LIU_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_wdmask(KM_LIU_RST, true); - qrio_prstcfg(KM_PAXK_RST, PRSTCFG_POWUP_UNIT_RST); - qrio_wdmask(KM_PAXK_RST, true); + qrio_prstcfg(KM_PAXK_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_wdmask(KM_PAXK_RST, true); +#endif - qrio_prstcfg(KM_DBG_ETH_RST, PRSTCFG_POWUP_UNIT_CORE_RST); - qrio_prst(KM_DBG_ETH_RST, false, false); - } +#if CONFIG_IS_ENABLED(TARGET_PG_WCOM_EXPU1) + qrio_prstcfg(WCOM_TMG_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_wdmask(WCOM_TMG_RST, true); + + qrio_prstcfg(WCOM_PHY_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_prst(WCOM_PHY_RST, false, false); + + qrio_prstcfg(WCOM_QSFP_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_wdmask(WCOM_QSFP_RST, true); + + qrio_prstcfg(WCOM_CLIPS_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_prst(WCOM_CLIPS_RST, false, false); +#endif + qrio_prstcfg(KM_DBG_ETH_RST, PRSTCFG_POWUP_UNIT_CORE_RST); + qrio_prst(KM_DBG_ETH_RST, false, false); i2c_deblock_gpio_cfg(); diff --git a/configs/pg_wcom_expu1_defconfig b/configs/pg_wcom_expu1_defconfig new file mode 100644 index 0000000000..65ab4fbc0a --- /dev/null +++ b/configs/pg_wcom_expu1_defconfig @@ -0,0 +1,70 @@ +CONFIG_ARM=y +CONFIG_TARGET_PG_WCOM_EXPU1=y +CONFIG_SYS_TEXT_BASE=0x60100000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_KM_DEF_NETDEV="eth2" +CONFIG_KM_COMMON_ETH_INIT=y +CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3 +CONFIG_SYS_MEMTEST_START=0x80000000 +CONFIG_SYS_MEMTEST_END=0x9fffffff +CONFIG_ENV_SIZE=0x4000 +CONFIG_ENV_SECT_SIZE=0x20000 +CONFIG_BOOTCOUNT_BOOTLIMIT=3 +CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020 +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-expu1" +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" +CONFIG_SILENT_CONSOLE=y +CONFIG_MISC_INIT_R=y +CONFIG_LAST_STAGE_INIT=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y +CONFIG_CMD_NAND_TRIMFFS=y +CONFIG_CMD_CRAMFS=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nor0=60000000.nor,nand0=68000000.flash" +CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),-(ubi0);68000000.flash:-(ubi1)" +CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y +CONFIG_ENV_IS_IN_FLASH=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_ADDR=0x60060000 +CONFIG_ENV_ADDR_REDUND=0x60040000 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_DM=y +CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_FSL_DDR3=y +# CONFIG_MMC is not set +CONFIG_SYS_I2C_MXC=y +CONFIG_SYS_I2C_MXC_I2C1=y +CONFIG_SYS_I2C_MXC_I2C2=y +CONFIG_SYS_I2C_MXC_I2C3=y +CONFIG_MTD=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_FLASH_CFI_MTD=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_MTD_RAW_NAND=y +CONFIG_PHY_MARVELL=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_TSEC_ENET=y +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_DM_SERIAL=y +CONFIG_SYS_NS16550=y diff --git a/include/configs/pg-wcom-expu1.h b/include/configs/pg-wcom-expu1.h new file mode 100644 index 0000000000..e08d941412 --- /dev/null +++ b/include/configs/pg-wcom-expu1.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020 Hitachi ABB Power Grids + */ + +#ifndef __CONFIG_PG_WCOM_EXPU1_H +#define __CONFIG_PG_WCOM_EXPU1_H + +#define WCOM_EXPU1 +#define CONFIG_HOSTNAME "EXPU1" + +#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" +#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" + +/* CLIPS FPGA Definitions */ +#define CONFIG_SYS_CSPR3_EXT (0x00) +#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CLIPS_BASE) | \ + CSPR_PORT_SIZE_8 | \ + CSPR_MSEL_GPCM | \ + CSPR_V) +#define CONFIG_SYS_AMASK3 IFC_AMASK(64 * 1024) +#define CONFIG_SYS_CSOR3 (CSOR_GPCM_ADM_SHIFT(0x4) | \ + CSOR_GPCM_TRHZ_40) +#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \ + FTIM0_GPCM_TEADC(0x7) | \ + FTIM0_GPCM_TEAHC(0x2)) +#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ + FTIM1_GPCM_TRAD(0x12)) +#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x3) | \ + FTIM2_GPCM_TCH(0x1) | \ + FTIM2_GPCM_TWP(0x12)) +#define CONFIG_SYS_CS3_FTIM3 0x04000000 + +/* PRST */ +#define WCOM_CLIPS_RST 0 +#define WCOM_QSFP_RST 1 +#define WCOM_PHY_RST 2 +#define WCOM_TMG_RST 3 +#define KM_DBG_ETH_RST 15 + +/* QRIO GPIOs used for deblocking */ +#define KM_I2C_DEBLOCK_PORT QRIO_GPIO_A +#define KM_I2C_DEBLOCK_SCL 20 +#define KM_I2C_DEBLOCK_SDA 21 + +/* ZL30343 on SPI */ +#define WCOM_ZL30343_CFG_ADDR 0xe8070000 +#define WCOM_ZL30343_SPI_BUS 0 +#define WCOM_ZL30343_CS 0 + +#include "km/pg-wcom-ls102xa.h" + +#endif /* __CONFIG_PG_WCOM_EXPU1_H */