From: Fabio Estevam Date: Wed, 19 Feb 2020 12:56:27 +0000 (-0300) Subject: ARM: dts: imx6sx-sdb: Sync with kernel 5.4.16 X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=a29d79da437aff68cbbaf126754d173a98568a4c;p=u-boot.git ARM: dts: imx6sx-sdb: Sync with kernel 5.4.16 Sync the imx6sx-sdb dts files with kernel 5.4.16. Signed-off-by: Fabio Estevam --- diff --git a/arch/arm/dts/imx6sx-sdb-u-boot.dtsi b/arch/arm/dts/imx6sx-sdb-u-boot.dtsi deleted file mode 100644 index 8f9236da0f..0000000000 --- a/arch/arm/dts/imx6sx-sdb-u-boot.dtsi +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2018 NXP - */ - -&qspi2 { - num-cs = <2>; - - flash0: n25q256a@0 { - compatible = "jedec,spi-nor"; - }; - - flash1: n25q256a@1 { - compatible = "jedec,spi-nor"; - }; -}; diff --git a/arch/arm/dts/imx6sx-sdb.dts b/arch/arm/dts/imx6sx-sdb.dts index 6dd9bebfe0..5a63ca6157 100644 --- a/arch/arm/dts/imx6sx-sdb.dts +++ b/arch/arm/dts/imx6sx-sdb.dts @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2015 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015 Freescale Semiconductor, Inc. #include "imx6sx-sdb.dtsi" @@ -117,15 +113,19 @@ #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; reg = <0>; }; - flash1: n25q256a@1 { + flash1: n25q256a@2 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; - reg = <1>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + reg = <2>; }; }; @@ -136,3 +136,20 @@ ®_soc { vin-supply = <&sw1a_reg>; }; + +®_vdd1p1 { + vin-supply = <&vgen6_reg>; +}; + +®_vdd2p5 { + vin-supply = <&vgen6_reg>; +}; + +®_can_stby { + /* Transceiver EN/STBY is active low on RevB board */ + gpio = <&gpio4 27 GPIO_ACTIVE_LOW>; +}; + +&snvs_pwrkey { + status = "okay"; +}; diff --git a/arch/arm/dts/imx6sx-sdb.dtsi b/arch/arm/dts/imx6sx-sdb.dtsi index da815527a7..f6972deb5e 100644 --- a/arch/arm/dts/imx6sx-sdb.dtsi +++ b/arch/arm/dts/imx6sx-sdb.dtsi @@ -1,10 +1,6 @@ -/* - * Copyright (C) 2014 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2014 Freescale Semiconductor, Inc. /dts-v1/; @@ -20,11 +16,12 @@ stdout-path = &uart1; }; - memory { + memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; - backlight { + backlight_display: backlight-display { compatible = "pwm-backlight"; pwms = <&pwm3 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -40,95 +37,118 @@ label = "Volume Up"; gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; linux,code = ; + wakeup-source; }; volume-down { label = "Volume Down"; gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; linux,code = ; + wakeup-source; }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + vcc_sd3: regulator-vcc-sd3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_sd3>; + regulator-name = "VCC_SD3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vcc_sd3: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_vcc_sd3>; - regulator-name = "VCC_SD3"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_usb_otg1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg1>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_usb_otg2_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_otg2>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_psu_5v: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "PSU-5V0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - reg_lcd_3v3: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "lcd-3v3"; - gpio = <&gpio3 27 0>; - enable-active-high; - }; - - reg_peri_3v3: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_peri_3v3>; - regulator-name = "peri_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - reg_enet_3v3: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_3v3>; - regulator-name = "enet_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; - }; + reg_psu_5v: regulator-psu-5v { + compatible = "regulator-fixed"; + regulator-name = "PSU-5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + gpio = <&gpio3 27 0>; + enable-active-high; + }; + + reg_peri_3v3: regulator-peri-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_peri_3v3>; + regulator-name = "peri_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_enet_3v3: regulator-enet-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_3v3>; + regulator-name = "enet_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 6 GPIO_ACTIVE_LOW>; + regulator-boot-on; + regulator-always-on; + }; + + reg_pcie_gpio: regulator-pcie-gpio { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lcd_5v: regulator-lcd-5v { + compatible = "regulator-fixed"; + regulator-name = "lcd-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_can_en: regulator-can-en { + compatible = "regulator-fixed"; + regulator-name = "can-en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_can_stby: regulator-can-stby { + compatible = "regulator-fixed"; + regulator-name = "can-stby"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; sound { @@ -146,6 +166,19 @@ mux-int-port = <2>; mux-ext-port = <6>; }; + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; }; &audmux { @@ -158,8 +191,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; phy-supply = <®_enet_3v3>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy1>; + phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; status = "okay"; mdio { @@ -184,6 +218,20 @@ status = "okay"; }; +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can_stby>; + status = "okay"; +}; + &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -212,34 +260,22 @@ }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie_gpio>; + status = "okay"; +}; + &lcdif1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd>; - lcd-supply = <®_lcd_3v3>; - display = <&display0>; status = "okay"; - display0: display0 { - bits-per-pixel = <16>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33500000>; - hactive = <800>; - vactive = <480>; - hback-porch = <89>; - hfront-porch = <164>; - vback-porch = <23>; - vfront-porch = <10>; - hsync-len = <10>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; @@ -365,6 +401,8 @@ MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91 + /* phy reset */ + MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0x10b0 >; }; @@ -391,6 +429,20 @@ >; }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020 + MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b020 + MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b020 + >; + }; + pinctrl_gpio_keys: gpio_keysgrp { fsl,pins = < MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059 @@ -453,6 +505,18 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0 + >; + }; + + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x10b0 + >; + }; + pinctrl_peri_3v3: peri3v3grp { fsl,pins = < MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000