From: Ley Foon Tan Date: Fri, 10 Jul 2020 06:58:15 +0000 (+0800) Subject: mtd: nand: raw: denali: Wait for reset completion status X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=94e8b328a75cb940efca80e76a31cfffe8e3799e;p=u-boot.git mtd: nand: raw: denali: Wait for reset completion status Fixed delay 200us is not working in certain platforms. Change to poll for reset completion status to have more reliable reset process. Controller will set the rst_comp bit in intr_status register after controller has completed its reset and initialization process. Tested-by: Masahiro Yamada Signed-off-by: Radu Bacrau Signed-off-by: Ley Foon Tan Signed-off-by: Masahiro Yamada --- diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c index 15e90291de..ab91db8546 100644 --- a/drivers/mtd/nand/raw/denali.c +++ b/drivers/mtd/nand/raw/denali.c @@ -1220,6 +1220,17 @@ static int denali_multidev_fixup(struct denali_nand_info *denali) return 0; } +int denali_wait_reset_complete(struct denali_nand_info *denali) +{ + u32 irq_status; + + irq_status = denali_wait_for_irq(denali, INTR__RST_COMP); + if (!(irq_status & INTR__RST_COMP)) + return -EIO; + + return 0; +} + int denali_init(struct denali_nand_info *denali) { struct nand_chip *chip = &denali->nand; diff --git a/drivers/mtd/nand/raw/denali.h b/drivers/mtd/nand/raw/denali.h index 019deda094..6cd02b2e26 100644 --- a/drivers/mtd/nand/raw/denali.h +++ b/drivers/mtd/nand/raw/denali.h @@ -321,6 +321,7 @@ struct denali_nand_info { #define DENALI_CAP_DMA_64BIT BIT(1) int denali_calc_ecc_bytes(int step_size, int strength); +int denali_wait_reset_complete(struct denali_nand_info *denali); int denali_init(struct denali_nand_info *denali); #endif /* __DENALI_H__ */ diff --git a/drivers/mtd/nand/raw/denali_dt.c b/drivers/mtd/nand/raw/denali_dt.c index 75ad15b075..8318ff507f 100644 --- a/drivers/mtd/nand/raw/denali_dt.c +++ b/drivers/mtd/nand/raw/denali_dt.c @@ -157,7 +157,11 @@ static int denali_dt_probe(struct udevice *dev) * kicked (bootstrap process). The driver must wait until it is * finished. Otherwise, it will result in unpredictable behavior. */ - udelay(200); + ret = denali_wait_reset_complete(denali); + if (ret) { + dev_err(denali->dev, "reset not completed.\n"); + return ret; + } } return denali_init(denali);