From: Simon Glass Date: Sun, 23 Jan 2022 14:04:12 +0000 (-0700) Subject: video: Drop FSL DIU driver X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=92e3fb8b5e7fbace4b347bfa0f97bf9c06ed97c9;p=u-boot.git video: Drop FSL DIU driver This does not use driver model and is more than two years past the migration date. Drop it. It can be added back later if needed. Signed-off-by: Simon Glass --- diff --git a/README b/README index 138de72ffc..8b05bfb53a 100644 --- a/README +++ b/README @@ -970,19 +970,6 @@ The following options need to be configured: - Keyboard Support: See Kconfig help for available keyboard drivers. -- Video support: - CONFIG_FSL_DIU_FB - Enable the Freescale DIU video driver. Reference boards for - SOCs that have a DIU should define this macro to enable DIU - support, and should also define these other macros: - - CONFIG_SYS_DIU_ADDR - - The DIU driver will look for the 'video-mode' environment - variable, and if defined, enable the DIU as a console during - boot. See the documentation file doc/README.video for a - description of this variable. - - LCD Support: CONFIG_LCD Define this to enable LCD support (for output to LCD diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index c8f62bfc19..f13965daf2 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -44,8 +44,6 @@ ifndef CONFIG_RAMBOOT_PBL obj-$(CONFIG_FSL_FIXED_MMC_LOCATION) += sdhc_boot.o endif -obj-$(CONFIG_FSL_DIU_CH7301) += diu_ch7301.o - ifdef CONFIG_ARM obj-$(CONFIG_DEEP_SLEEP) += arm_sleep.o else diff --git a/board/freescale/common/diu_ch7301.c b/board/freescale/common/diu_ch7301.c deleted file mode 100644 index 05e6a3acf1..0000000000 --- a/board/freescale/common/diu_ch7301.c +++ /dev/null @@ -1,217 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - * Copyright 2019 NXP - * Authors: Priyanka Jain - * Wang Dongsheng - * - * This file is copied and modified from the original t1040qds/diu.c. - * Encoder can be used in T104x and LSx Platform. - */ - -#include -#include -#include -#include - -#define I2C_DVI_INPUT_DATA_FORMAT_REG 0x1F -#define I2C_DVI_PLL_CHARGE_CNTL_REG 0x33 -#define I2C_DVI_PLL_DIVIDER_REG 0x34 -#define I2C_DVI_PLL_SUPPLY_CNTL_REG 0x35 -#define I2C_DVI_PLL_FILTER_REG 0x36 -#define I2C_DVI_TEST_PATTERN_REG 0x48 -#define I2C_DVI_POWER_MGMT_REG 0x49 -#define I2C_DVI_LOCK_STATE_REG 0x4D -#define I2C_DVI_SYNC_POLARITY_REG 0x56 - -/* - * Set VSYNC/HSYNC to active high. This is polarity of sync signals - * from DIU->DVI. The DIU default is active igh, so DVI is set to - * active high. - */ -#define I2C_DVI_INPUT_DATA_FORMAT_VAL 0x98 - -#define I2C_DVI_PLL_CHARGE_CNTL_HIGH_SPEED_VAL 0x06 -#define I2C_DVI_PLL_DIVIDER_HIGH_SPEED_VAL 0x26 -#define I2C_DVI_PLL_FILTER_HIGH_SPEED_VAL 0xA0 -#define I2C_DVI_PLL_CHARGE_CNTL_LOW_SPEED_VAL 0x08 -#define I2C_DVI_PLL_DIVIDER_LOW_SPEED_VAL 0x16 -#define I2C_DVI_PLL_FILTER_LOW_SPEED_VAL 0x60 - -/* Clear test pattern */ -#define I2C_DVI_TEST_PATTERN_VAL 0x18 -/* Exit Power-down mode */ -#define I2C_DVI_POWER_MGMT_VAL 0xC0 - -/* Monitor polarity is handled via DVI Sync Polarity Register */ -#define I2C_DVI_SYNC_POLARITY_VAL 0x00 - -/* Programming of HDMI Chrontel CH7301 connector */ -int diu_set_dvi_encoder(unsigned int pixclock) -{ - int ret; - u8 temp; - - temp = I2C_DVI_TEST_PATTERN_VAL; -#if CONFIG_IS_ENABLED(DM_I2C) - struct udevice *dev; - - ret = i2c_get_chip_for_busnum(CONFIG_SYS_I2C_DVI_BUS_NUM, - CONFIG_SYS_I2C_DVI_ADDR, - 1, &dev); - if (ret) { - printf("%s: Cannot find udev for a bus %d\n", __func__, - CONFIG_SYS_I2C_DVI_BUS_NUM); - return ret; - } - ret = dm_i2c_write(dev, I2C_DVI_TEST_PATTERN_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select proper dvi test pattern\n"); - return ret; - } - temp = I2C_DVI_INPUT_DATA_FORMAT_VAL; - ret = dm_i2c_write(dev, I2C_DVI_INPUT_DATA_FORMAT_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi input data format\n"); - return ret; - } - - /* Set Sync polarity register */ - temp = I2C_DVI_SYNC_POLARITY_VAL; - ret = dm_i2c_write(dev, I2C_DVI_SYNC_POLARITY_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi syc polarity\n"); - return ret; - } - - /* Set PLL registers based on pixel clock rate*/ - if (pixclock > 65000000) { - temp = I2C_DVI_PLL_CHARGE_CNTL_HIGH_SPEED_VAL; - ret = dm_i2c_write(dev, I2C_DVI_PLL_CHARGE_CNTL_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll charge_cntl\n"); - return ret; - } - temp = I2C_DVI_PLL_DIVIDER_HIGH_SPEED_VAL; - ret = dm_i2c_write(dev, I2C_DVI_PLL_DIVIDER_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll divider\n"); - return ret; - } - temp = I2C_DVI_PLL_FILTER_HIGH_SPEED_VAL; - ret = dm_i2c_write(dev, I2C_DVI_PLL_FILTER_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll filter\n"); - return ret; - } - } else { - temp = I2C_DVI_PLL_CHARGE_CNTL_LOW_SPEED_VAL; - ret = dm_i2c_write(dev, I2C_DVI_PLL_CHARGE_CNTL_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll charge_cntl\n"); - return ret; - } - temp = I2C_DVI_PLL_DIVIDER_LOW_SPEED_VAL; - ret = dm_i2c_write(dev, I2C_DVI_PLL_DIVIDER_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll divider\n"); - return ret; - } - temp = I2C_DVI_PLL_FILTER_LOW_SPEED_VAL; - ret = dm_i2c_write(dev, I2C_DVI_PLL_FILTER_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll filter\n"); - return ret; - } - } - - temp = I2C_DVI_POWER_MGMT_VAL; - ret = dm_i2c_write(dev, I2C_DVI_POWER_MGMT_REG, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi power mgmt\n"); - return ret; - } -#else - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_TEST_PATTERN_REG, 1, - &temp, 1); - if (ret) { - puts("I2C: failed to select proper dvi test pattern\n"); - return ret; - } - temp = I2C_DVI_INPUT_DATA_FORMAT_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_INPUT_DATA_FORMAT_REG, - 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi input data format\n"); - return ret; - } - - /* Set Sync polarity register */ - temp = I2C_DVI_SYNC_POLARITY_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_SYNC_POLARITY_REG, 1, - &temp, 1); - if (ret) { - puts("I2C: failed to select dvi syc polarity\n"); - return ret; - } - - /* Set PLL registers based on pixel clock rate*/ - if (pixclock > 65000000) { - temp = I2C_DVI_PLL_CHARGE_CNTL_HIGH_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_CHARGE_CNTL_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll charge_cntl\n"); - return ret; - } - temp = I2C_DVI_PLL_DIVIDER_HIGH_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_DIVIDER_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll divider\n"); - return ret; - } - temp = I2C_DVI_PLL_FILTER_HIGH_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_FILTER_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll filter\n"); - return ret; - } - } else { - temp = I2C_DVI_PLL_CHARGE_CNTL_LOW_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_CHARGE_CNTL_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll charge_cntl\n"); - return ret; - } - temp = I2C_DVI_PLL_DIVIDER_LOW_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_DIVIDER_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll divider\n"); - return ret; - } - temp = I2C_DVI_PLL_FILTER_LOW_SPEED_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, - I2C_DVI_PLL_FILTER_REG, 1, &temp, 1); - if (ret) { - puts("I2C: failed to select dvi pll filter\n"); - return ret; - } - } - - temp = I2C_DVI_POWER_MGMT_VAL; - ret = i2c_write(CONFIG_SYS_I2C_DVI_ADDR, I2C_DVI_POWER_MGMT_REG, 1, - &temp, 1); - if (ret) { - puts("I2C: failed to select dvi power mgmt\n"); - return ret; - } -#endif - - udelay(500); - - return 0; -} diff --git a/board/freescale/common/diu_ch7301.h b/board/freescale/common/diu_ch7301.h deleted file mode 100644 index f35661cdc4..0000000000 --- a/board/freescale/common/diu_ch7301.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - */ - -#ifndef __DIU_HDMI_CH7301__ -#define __DIU_HDMI_CH7301__ - -/* Programming of HDMI Chrontel CH7301 connector */ -int diu_set_dvi_encoder(unsigned int pixclock); - -#endif diff --git a/board/freescale/t104xrdb/Makefile b/board/freescale/t104xrdb/Makefile index d67e9412ec..a949501943 100644 --- a/board/freescale/t104xrdb/Makefile +++ b/board/freescale/t104xrdb/Makefile @@ -8,7 +8,6 @@ else obj-y += t104xrdb.o obj-y += cpld.o obj-y += eth.o -obj-$(CONFIG_FSL_DIU_FB)+= diu.o endif obj-y += ddr.o obj-y += law.o diff --git a/board/freescale/t104xrdb/diu.c b/board/freescale/t104xrdb/diu.c deleted file mode 100644 index 022d329713..0000000000 --- a/board/freescale/t104xrdb/diu.c +++ /dev/null @@ -1,83 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - * Author: Priyanka Jain - */ - -#include -#include -#include -#include -#include -#include - -#include "../common/diu_ch7301.h" - -#include "cpld.h" -#include "t104xrdb.h" - -/* - * DIU Area Descriptor - * - * Note that we need to byte-swap the value before it's written to the AD - * register. So even though the registers don't look like they're in the same - * bit positions as they are on the MPC8610, the same value is written to the - * AD register on the MPC8610 and on the P1022. - */ -#define AD_BYTE_F 0x10000000 -#define AD_ALPHA_C_SHIFT 25 -#define AD_BLUE_C_SHIFT 23 -#define AD_GREEN_C_SHIFT 21 -#define AD_RED_C_SHIFT 19 -#define AD_PIXEL_S_SHIFT 16 -#define AD_COMP_3_SHIFT 12 -#define AD_COMP_2_SHIFT 8 -#define AD_COMP_1_SHIFT 4 -#define AD_COMP_0_SHIFT 0 - -void diu_set_pixel_clock(unsigned int pixclock) -{ - unsigned long speed_ccb, temp; - u32 pixval; - int ret; - - speed_ccb = get_bus_freq(0); - temp = 1000000000 / pixclock; - temp *= 1000; - pixval = speed_ccb / temp; - - /* Program HDMI encoder */ - ret = diu_set_dvi_encoder(temp); - if (ret) { - puts("Failed to set DVI encoder\n"); - return; - } - - /* Program pixel clock */ - out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR, - ((pixval << PXCK_BITS_START) & PXCK_MASK)); - - /* enable clock*/ - out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR, PXCKEN_MASK | - ((pixval << PXCK_BITS_START) & PXCK_MASK)); -} - -int platform_diu_init(unsigned int xres, unsigned int yres, const char *port) -{ - u32 pixel_format; - u8 sw; - - /*Configure Display ouput port as HDMI*/ - sw = CPLD_READ(sfp_ctl_status); - CPLD_WRITE(sfp_ctl_status , sw & ~(CPLD_DIU_SEL_DFP)); - - pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) | - (0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) | - (2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) | - (8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) | - (8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT)); - - printf("DIU: Switching to monitor DVI @ %ux%u\n", xres, yres); - - return fsl_diu_init(xres, yres, pixel_format, 0); -} diff --git a/drivers/video/Makefile b/drivers/video/Makefile index dc51e04f3d..616e76f584 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -31,7 +31,6 @@ obj-y += ti/ obj-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o obj-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o obj-$(CONFIG_FORMIKE) += formike.o -obj-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o obj-$(CONFIG_IHS_VIDEO_OUT) += ihs_video_out.o obj-$(CONFIG_LD9040) += ld9040.o obj-$(CONFIG_LG4573) += lg4573.o diff --git a/drivers/video/fsl_diu_fb.c b/drivers/video/fsl_diu_fb.c deleted file mode 100644 index 6e335b5f43..0000000000 --- a/drivers/video/fsl_diu_fb.c +++ /dev/null @@ -1,415 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc. - * Authors: York Sun - * Timur Tabi - * - * FSL DIU Framebuffer driver - */ - -#include -#include -#include - -#include "videomodes.h" -#include -#include -#include - -/* This setting is used for the ifm pdm360ng with PRIMEVIEW PM070WL3 */ -static struct fb_videomode fsl_diu_mode_800_480 = { - .name = "800x480-60", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 31250, - .left_margin = 86, - .right_margin = 42, - .upper_margin = 33, - .lower_margin = 10, - .hsync_len = 128, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED -}; - -/* For the SHARP LQ084S3LG01, used on the P1022DS board */ -static struct fb_videomode fsl_diu_mode_800_600 = { - .name = "800x600-60", - .refresh = 60, - .xres = 800, - .yres = 600, - .pixclock = 25000, - .left_margin = 88, - .right_margin = 40, - .upper_margin = 23, - .lower_margin = 1, - .hsync_len = 128, - .vsync_len = 4, - .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED -}; - -/* - * These parameters give default parameters - * for video output 1024x768, - * FIXME - change timing to proper amounts - * hsync 31.5kHz, vsync 60Hz - */ -static struct fb_videomode fsl_diu_mode_1024_768 = { - .name = "1024x768-60", - .refresh = 60, - .xres = 1024, - .yres = 768, - .pixclock = 15385, - .left_margin = 160, - .right_margin = 24, - .upper_margin = 29, - .lower_margin = 3, - .hsync_len = 136, - .vsync_len = 6, - .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED -}; - -static struct fb_videomode fsl_diu_mode_1280_1024 = { - .name = "1280x1024-60", - .refresh = 60, - .xres = 1280, - .yres = 1024, - .pixclock = 9375, - .left_margin = 38, - .right_margin = 128, - .upper_margin = 2, - .lower_margin = 7, - .hsync_len = 216, - .vsync_len = 37, - .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED -}; - -static struct fb_videomode fsl_diu_mode_1280_720 = { - .name = "1280x720-60", - .refresh = 60, - .xres = 1280, - .yres = 720, - .pixclock = 13426, - .left_margin = 192, - .right_margin = 64, - .upper_margin = 22, - .lower_margin = 1, - .hsync_len = 136, - .vsync_len = 3, - .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED -}; - -static struct fb_videomode fsl_diu_mode_1920_1080 = { - .name = "1920x1080-60", - .refresh = 60, - .xres = 1920, - .yres = 1080, - .pixclock = 5787, - .left_margin = 328, - .right_margin = 120, - .upper_margin = 34, - .lower_margin = 1, - .hsync_len = 208, - .vsync_len = 3, - .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED -}; - -/* - * These are the fields of area descriptor(in DDR memory) for every plane - */ -struct diu_ad { - /* Word 0(32-bit) in DDR memory */ - __le32 pix_fmt; /* hard coding pixel format */ - /* Word 1(32-bit) in DDR memory */ - __le32 addr; - /* Word 2(32-bit) in DDR memory */ - __le32 src_size_g_alpha; - /* Word 3(32-bit) in DDR memory */ - __le32 aoi_size; - /* Word 4(32-bit) in DDR memory */ - __le32 offset_xyi; - /* Word 5(32-bit) in DDR memory */ - __le32 offset_xyd; - /* Word 6(32-bit) in DDR memory */ - __le32 ckmax_r:8; - __le32 ckmax_g:8; - __le32 ckmax_b:8; - __le32 res9:8; - /* Word 7(32-bit) in DDR memory */ - __le32 ckmin_r:8; - __le32 ckmin_g:8; - __le32 ckmin_b:8; - __le32 res10:8; - /* Word 8(32-bit) in DDR memory */ - __le32 next_ad; - /* Word 9(32-bit) in DDR memory, just for 64-bit aligned */ - __le32 res[3]; -} __attribute__ ((packed)); - -/* - * DIU register map - */ -struct diu { - __be32 desc[3]; - __be32 gamma; - __be32 pallete; - __be32 cursor; - __be32 curs_pos; - __be32 diu_mode; - __be32 bgnd; - __be32 bgnd_wb; - __be32 disp_size; - __be32 wb_size; - __be32 wb_mem_addr; - __be32 hsyn_para; - __be32 vsyn_para; - __be32 syn_pol; - __be32 thresholds; - __be32 int_status; - __be32 int_mask; - __be32 colorbar[8]; - __be32 filling; - __be32 plut; -} __attribute__ ((packed)); - -struct diu_addr { - void *vaddr; /* Virtual address */ - u32 paddr; /* 32-bit physical address */ - unsigned int offset; /* Alignment offset */ -}; - -static struct fb_info info; - -/* - * Align to 64-bit(8-byte), 32-byte, etc. - */ -static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align) -{ - u32 offset, ssize; - u32 mask; - - ssize = size + bytes_align; - buf->vaddr = malloc(ssize); - if (!buf->vaddr) - return -1; - - memset(buf->vaddr, 0, ssize); - mask = bytes_align - 1; - offset = (u32)buf->vaddr & mask; - if (offset) { - buf->offset = bytes_align - offset; - buf->vaddr += offset; - } else - buf->offset = 0; - - buf->paddr = virt_to_phys(buf->vaddr); - return 0; -} - -/* - * Allocate a framebuffer and an Area Descriptor that points to it. Both - * are created in the same memory block. The Area Descriptor is updated to - * point to the framebuffer memory. Memory is aligned as needed. - */ -static struct diu_ad *allocate_fb(unsigned int xres, unsigned int yres, - unsigned int depth, char **fb) -{ - unsigned long size = xres * yres * depth; - struct diu_addr addr; - struct diu_ad *ad; - size_t ad_size = roundup(sizeof(struct diu_ad), 32); - - /* - * Allocate a memory block that holds the Area Descriptor and the - * frame buffer right behind it. To keep the code simple, everything - * is aligned on a 32-byte address. - */ - if (allocate_buf(&addr, ad_size + size, 32) < 0) - return NULL; - - ad = addr.vaddr; - ad->addr = cpu_to_le32(addr.paddr + ad_size); - ad->aoi_size = cpu_to_le32((yres << 16) | xres); - ad->src_size_g_alpha = cpu_to_le32((yres << 12) | xres); - ad->offset_xyi = 0; - ad->offset_xyd = 0; - - if (fb) - *fb = addr.vaddr + ad_size; - - return ad; -} - -int fsl_diu_init(u16 xres, u16 yres, u32 pixel_format, int gamma_fix) -{ - struct fb_videomode *fsl_diu_mode_db; - struct diu_ad *ad; - struct diu *hw = (struct diu *)CONFIG_SYS_DIU_ADDR; - u8 *gamma_table_base; - unsigned int i, j; - struct diu_addr gamma; - struct diu_addr cursor; - -/* Convert the X,Y resolution pair into a single number */ -#define RESOLUTION(x, y) (((u32)(x) << 16) | (y)) - - switch (RESOLUTION(xres, yres)) { - case RESOLUTION(800, 480): - fsl_diu_mode_db = &fsl_diu_mode_800_480; - break; - case RESOLUTION(800, 600): - fsl_diu_mode_db = &fsl_diu_mode_800_600; - break; - case RESOLUTION(1024, 768): - fsl_diu_mode_db = &fsl_diu_mode_1024_768; - break; - case RESOLUTION(1280, 1024): - fsl_diu_mode_db = &fsl_diu_mode_1280_1024; - break; - case RESOLUTION(1280, 720): - fsl_diu_mode_db = &fsl_diu_mode_1280_720; - break; - case RESOLUTION(1920, 1080): - fsl_diu_mode_db = &fsl_diu_mode_1920_1080; - break; - default: - printf("DIU: Unsupported resolution %ux%u\n", xres, yres); - return -1; - } - - /* read mode info */ - info.var.xres = fsl_diu_mode_db->xres; - info.var.yres = fsl_diu_mode_db->yres; - info.var.bits_per_pixel = 32; - info.var.pixclock = fsl_diu_mode_db->pixclock; - info.var.left_margin = fsl_diu_mode_db->left_margin; - info.var.right_margin = fsl_diu_mode_db->right_margin; - info.var.upper_margin = fsl_diu_mode_db->upper_margin; - info.var.lower_margin = fsl_diu_mode_db->lower_margin; - info.var.hsync_len = fsl_diu_mode_db->hsync_len; - info.var.vsync_len = fsl_diu_mode_db->vsync_len; - info.var.sync = fsl_diu_mode_db->sync; - info.var.vmode = fsl_diu_mode_db->vmode; - info.fix.line_length = info.var.xres * info.var.bits_per_pixel / 8; - - /* Memory allocation for framebuffer */ - info.screen_size = - info.var.xres * info.var.yres * (info.var.bits_per_pixel / 8); - ad = allocate_fb(info.var.xres, info.var.yres, - info.var.bits_per_pixel / 8, &info.screen_base); - if (!ad) { - printf("DIU: Out of memory\n"); - return -1; - } - - ad->pix_fmt = pixel_format; - - /* Disable chroma keying function */ - ad->ckmax_r = 0; - ad->ckmax_g = 0; - ad->ckmax_b = 0; - - ad->ckmin_r = 255; - ad->ckmin_g = 255; - ad->ckmin_b = 255; - - /* Initialize the gamma table */ - if (allocate_buf(&gamma, 256 * 3, 32) < 0) { - printf("DIU: Out of memory\n"); - return -1; - } - gamma_table_base = gamma.vaddr; - for (i = 0; i <= 2; i++) - for (j = 0; j < 256; j++) - *gamma_table_base++ = j; - - if (gamma_fix == 1) { /* fix the gamma */ - gamma_table_base = gamma.vaddr; - for (i = 0; i < 256 * 3; i++) { - gamma_table_base[i] = (gamma_table_base[i] << 2) - | ((gamma_table_base[i] >> 6) & 0x03); - } - } - - /* Initialize the cursor */ - if (allocate_buf(&cursor, 32 * 32 * 2, 32) < 0) { - printf("DIU: Can't alloc cursor data\n"); - return -1; - } - - /* Program DIU registers */ - out_be32(&hw->diu_mode, 0); /* Temporarily disable the DIU */ - - out_be32(&hw->gamma, gamma.paddr); - out_be32(&hw->cursor, cursor.paddr); - out_be32(&hw->bgnd, 0x007F7F7F); - out_be32(&hw->disp_size, info.var.yres << 16 | info.var.xres); - out_be32(&hw->hsyn_para, info.var.left_margin << 22 | - info.var.hsync_len << 11 | - info.var.right_margin); - - out_be32(&hw->vsyn_para, info.var.upper_margin << 22 | - info.var.vsync_len << 11 | - info.var.lower_margin); - - /* Pixel Clock configuration */ - diu_set_pixel_clock(info.var.pixclock); - - /* Set the frame buffers */ - out_be32(&hw->desc[0], virt_to_phys(ad)); - out_be32(&hw->desc[1], 0); - out_be32(&hw->desc[2], 0); - - /* Enable the DIU, set display to all three planes */ - out_be32(&hw->diu_mode, 1); - - return 0; -} - -void *video_hw_init(void) -{ - static GraphicDevice ctfb; - const char *options; - unsigned int depth = 0, freq = 0; - - if (!video_get_video_mode(&ctfb.winSizeX, &ctfb.winSizeY, &depth, &freq, - &options)) - return NULL; - - /* Find the monitor port, which is a required option */ - if (!options) - return NULL; - if (strncmp(options, "monitor=", 8) != 0) - return NULL; - - if (platform_diu_init(ctfb.winSizeX, ctfb.winSizeY, options + 8) < 0) - return NULL; - - /* fill in Graphic device struct */ - sprintf(ctfb.modeIdent, "%ix%ix%i %ikHz %iHz", - ctfb.winSizeX, ctfb.winSizeY, depth, 64, freq); - - ctfb.frameAdrs = (unsigned int)info.screen_base; - ctfb.plnSizeX = ctfb.winSizeX; - ctfb.plnSizeY = ctfb.winSizeY; - - ctfb.gdfBytesPP = 4; - ctfb.gdfIndex = GDF_32BIT_X888RGB; - - ctfb.isaBase = 0; - ctfb.pciBase = 0; - ctfb.memSize = info.screen_size; - - /* Cursor Start Address */ - ctfb.dprBase = 0; - ctfb.vprBase = 0; - ctfb.cprBase = 0; - - return &ctfb; -} diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 00fabd6163..1fa1fc09aa 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -365,17 +365,6 @@ #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) -/* Video */ -#undef CONFIG_FSL_DIU_FB /* RDB doesn't support DIU */ -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) -/* - * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so - * disable empty flash sector detection, which is I/O-intensive. - */ -#undef CONFIG_SYS_FLASH_EMPTY_INFO -#endif - /* I2C */ #define I2C_PCA6408_BUS_NUM 1 diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 16298a7eaa..562f7b37ac 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -345,18 +345,6 @@ #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) -#if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB) -/* Video */ -#define CONFIG_FSL_DIU_FB - -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_FSL_DIU_CH7301 -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) -#endif -#endif - -/* I2C */ - /* I2C bus multiplexer */ #define I2C_MUX_PCA_ADDR 0x70 #define I2C_MUX_CH_DEFAULT 0x8 @@ -558,18 +546,11 @@ #define FDTFILE "t1042rdb/t1042d4rdb.dtb" #endif -#ifdef CONFIG_FSL_DIU_FB -#define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi" -#else -#define DIU_ENVIRONMENT -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ - "video-mode=" __stringify(DIU_ENVIRONMENT) "\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ "tftpflash=tftpboot $loadaddr $uboot && " \ diff --git a/include/fsl_diu_fb.h b/include/fsl_diu_fb.h deleted file mode 100644 index 139851ba1a..0000000000 --- a/include/fsl_diu_fb.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2007, 2011 Freescale Semiconductor, Inc. - * Authors: York Sun - * Timur Tabi - * - * FSL DIU Framebuffer driver - */ - -int fsl_diu_init(u16 xres, u16 yres, u32 pixel_format, int gamma_fix); - -/* Prototypes for external board-specific functions */ -int platform_diu_init(unsigned int xres, unsigned int yres, const char *port); -void diu_set_pixel_clock(unsigned int pixclock); diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 62fce7cb30..ac0a949071 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -158,8 +158,6 @@ CONFIG_FSL_CADMUS CONFIG_FSL_CORENET CONFIG_FSL_CPLD CONFIG_FSL_DEVICE_DISABLE -CONFIG_FSL_DIU_CH7301 -CONFIG_FSL_DIU_FB CONFIG_FSL_DSPI1 CONFIG_FSL_ESDHC_PIN_MUX CONFIG_FSL_FIXED_MMC_LOCATION @@ -988,7 +986,6 @@ CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS CONFIG_SYS_DIALOG_PMIC_I2C_ADDR CONFIG_SYS_DIRECT_FLASH_TFTP CONFIG_SYS_DISCOVER_PHY -CONFIG_SYS_DIU_ADDR CONFIG_SYS_DPAA_DCE CONFIG_SYS_DPAA_FMAN CONFIG_SYS_DPAA_PME