From: Allen Martin Date: Sat, 16 Mar 2013 18:58:02 +0000 (+0000) Subject: tegra: remove support for UART SPI switch X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=9000652da0893af8a07f81622b3ef8de6c8725bb;p=u-boot.git tegra: remove support for UART SPI switch This feature was only used for tegra20 seaboard that had a pinmux conflict on the SPI pins. These boards were never manufactured, so remove this support to clean up SPI driver. Signed-off-by: Allen Martin Signed-off-by: Tom Warren Reviewed-by: Stephen Warren --- diff --git a/arch/arm/include/asm/arch-tegra/board.h b/arch/arm/include/asm/arch-tegra/board.h index 3db0d93b89..1a6699096b 100644 --- a/arch/arm/include/asm/arch-tegra/board.h +++ b/arch/arm/include/asm/arch-tegra/board.h @@ -25,8 +25,7 @@ #define _TEGRA_BOARD_H_ /* Set up pinmux to make UART usable */ -void gpio_config_uart(void); /* CONFIG_SPI_UART_SWITCH */ -void gpio_early_init_uart(void); /*!CONFIG_SPI_UART_SWITCH */ +void gpio_early_init_uart(void); /* Set up early UART output */ void board_init_uart_f(void); diff --git a/arch/arm/include/asm/arch-tegra20/uart-spi-switch.h b/arch/arm/include/asm/arch-tegra20/uart-spi-switch.h deleted file mode 100644 index 82ac180acd..0000000000 --- a/arch/arm/include/asm/arch-tegra20/uart-spi-switch.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (c) 2011 The Chromium OS Authors. - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _UART_SPI_SWITCH_H -#define _UART_SPI_SWITCH_H - -#if defined(CONFIG_SPI_UART_SWITCH) -/* - * Signal that we are about to use the UART. This unfortunate hack is - * required by Seaboard, which cannot use its console and SPI at the same - * time! If the board file provides this, the board config will declare it. - * Let this be a lesson for others. - */ -void pinmux_select_uart(void); - -/* - * Signal that we are about the use the SPI bus. - */ -void pinmux_select_spi(void); - -#else /* not CONFIG_SPI_UART_SWITCH */ - -static inline void pinmux_select_uart(void) {} -static inline void pinmux_select_spi(void) {} - -#endif - -#endif diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 7d9f361a8a..b6e6566685 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -132,9 +132,6 @@ int board_init(void) clock_init(); clock_verify(); -#ifdef CONFIG_SPI_UART_SWITCH - gpio_config_uart(); -#endif #if defined(CONFIG_TEGRA_SPI) || defined(CONFIG_TEGRA_SLINK) pin_mux_spi(); spi_init(); diff --git a/board/nvidia/common/common.mk b/board/nvidia/common/common.mk index bd6202c299..d9bcb85401 100644 --- a/board/nvidia/common/common.mk +++ b/board/nvidia/common/common.mk @@ -1,4 +1,3 @@ # common options for all tegra boards COBJS-y += ../../nvidia/common/board.o -COBJS-$(CONFIG_SPI_UART_SWITCH) += ../../nvidia/common/uart-spi-switch.o COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += ../../nvidia/common/emc.o diff --git a/board/nvidia/common/uart-spi-switch.c b/board/nvidia/common/uart-spi-switch.c deleted file mode 100644 index e9d445d9e2..0000000000 --- a/board/nvidia/common/uart-spi-switch.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Copyright (c) 2011 The Chromium OS Authors. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include - -/* position of the UART/SPI select switch */ -enum spi_uart_switch { - SWITCH_UNKNOWN, - SWITCH_SPI, - SWITCH_UART, - SWITCH_BOTH -}; - -/* Information about the spi/uart switch */ -struct spi_uart { - int gpio; /* GPIO to control switch */ - u32 port; /* Port number of UART affected */ -}; - -static struct spi_uart local; -static enum spi_uart_switch switch_pos; /* Current switch position */ - - -static void get_config(struct spi_uart *config) -{ -#if defined CONFIG_SPI_CORRUPTS_UART - config->gpio = CONFIG_UART_DISABLE_GPIO; - config->port = CONFIG_SPI_CORRUPTS_UART_NR; -#else - config->gpio = -1; -#endif -} - -/* - * Init the UART / SPI switch. This can be called before relocation so we must - * not access BSS. - */ -void gpio_early_init_uart(void) -{ - struct spi_uart config; - - get_config(&config); - if (config.gpio != -1) { - /* Cannot provide a label prior to relocation */ - gpio_request(config.gpio, NULL); - gpio_direction_output(config.gpio, 0); - } -} - -/* - * Configure the UART / SPI switch. - */ -void gpio_config_uart(void) -{ - get_config(&local); - if (local.gpio != -1) { - gpio_direction_output(local.gpio, 0); - switch_pos = SWITCH_UART; - } else { - /* - * If we're here we don't have a SPI switch; go ahead and - * enable the SPI now. We didn't in spi_init() so we wouldn't - * kill the UART. - */ - pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH); - switch_pos = SWITCH_BOTH; - } -} - -static void spi_uart_switch(struct spi_uart *config, - enum spi_uart_switch new_pos) -{ - if (switch_pos == SWITCH_BOTH || new_pos == switch_pos) - return; - - /* pre-delay, allow SPI/UART to settle, FIFO to empty, etc. */ - udelay(CONFIG_SPI_CORRUPTS_UART_DLY); - - /* We need to dynamically change the pinmux, shared w/UART RXD/CTS */ - pinmux_set_func(PINGRP_GMC, new_pos == SWITCH_SPI ? - PMUX_FUNC_SFLASH : PMUX_FUNC_UARTD); - - /* - * On Seaboard, MOSI/MISO are shared w/UART. - * Use GPIO I3 (UART_DISABLE) to tristate UART during SPI activity. - * Enable UART later (cs_deactivate) so we can use it for U-Boot comms. - */ - gpio_direction_output(config->gpio, new_pos == SWITCH_SPI); - switch_pos = new_pos; -} - -void pinmux_select_uart(void) -{ - spi_uart_switch(&local, SWITCH_UART); -} - -void pinmux_select_spi(void) -{ - spi_uart_switch(&local, SWITCH_SPI); -} diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index e581fddf43..498e5137a3 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -31,7 +31,7 @@ #include /* TODO: Remove this code when the SPI switch is working */ -#if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA) +#if (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA) void gpio_early_init_uart(void) { /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */ diff --git a/drivers/spi/tegra_spi.c b/drivers/spi/tegra_spi.c index ce19095af0..2662923ff1 100644 --- a/drivers/spi/tegra_spi.c +++ b/drivers/spi/tegra_spi.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include @@ -36,12 +35,6 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_SPI_CORRUPTS_UART) - #define corrupt_delay() udelay(CONFIG_SPI_CORRUPTS_UART_DLY); -#else - #define corrupt_delay() -#endif - struct tegra_spi_slave { struct spi_slave slave; struct spi_tegra *regs; @@ -175,16 +168,8 @@ int spi_claim_bus(struct spi_slave *slave) */ pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH); pinmux_tristate_disable(PINGRP_LSPI); + pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH); -#ifndef CONFIG_SPI_UART_SWITCH - /* - * NOTE: - * Only set PinMux bits 3:2 to SPI here on boards that don't have the - * SPI UART switch or subsequent UART data won't go out! See - * spi_uart_switch(). - */ - /* TODO: pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH); */ -#endif return 0; } @@ -202,24 +187,16 @@ void spi_cs_activate(struct spi_slave *slave) { struct tegra_spi_slave *spi = to_tegra_spi(slave); - pinmux_select_spi(); - /* CS is negated on Tegra, so drive a 1 to get a 0 */ setbits_le32(&spi->regs->command, SPI_CMD_CS_VAL); - - corrupt_delay(); /* Let UART settle */ } void spi_cs_deactivate(struct spi_slave *slave) { struct tegra_spi_slave *spi = to_tegra_spi(slave); - pinmux_select_uart(); - /* CS is negated on Tegra, so drive a 0 to get a 1 */ clrbits_le32(&spi->regs->command, SPI_CMD_CS_VAL); - - corrupt_delay(); /* Let SPI settle */ } int spi_xfer(struct spi_slave *slave, unsigned int bitlen,