From: Soeren Moch Date: Tue, 20 Sep 2022 16:05:41 +0000 (+0200) Subject: board: tbs2910: Add serial rx buffer in defconfig X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=8d2cbb096ca980b4935f22abe92e20e29c089a00;p=u-boot.git board: tbs2910: Add serial rx buffer in defconfig ... to avoid loosing characters when pasting text into the serial console. This allows to remove the workaround to disable the vidconsole output when no HDMI device is detected. This workaround only was there to speed-up serial console processing. Signed-off-by: Soeren Moch Reviewed-by: Fabio Estevam --- diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig index 59444372e9..20de590e27 100644 --- a/configs/tbs2910_defconfig +++ b/configs/tbs2910_defconfig @@ -24,7 +24,7 @@ CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; else run bootcmd_mmc || run distro_bootcmd; fi" CONFIG_USE_PREBOOT=y -CONFIG_PREBOOT="echo PCI:; pci enum; pci 1; usb start; if hdmidet; then run set_con_hdmi; else run set_con_serial; fi" +CONFIG_PREBOOT="echo PCI:; pci enum; pci 1; usb start" CONFIG_DEFAULT_FDT_FILE="imx6q-tbs2910.dtb" CONFIG_PRE_CONSOLE_BUFFER=y CONFIG_HUSH_PARSER=y @@ -89,6 +89,7 @@ CONFIG_PINCTRL_IMX6=y CONFIG_DM_RTC=y CONFIG_RTC_DS1307=y CONFIG_DM_SERIAL=y +CONFIG_SERIAL_RX_BUFFER=y CONFIG_MXC_UART=y CONFIG_DM_THERMAL=y CONFIG_IMX_THERMAL=y diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index c93df00d58..7f197851d0 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -61,10 +61,6 @@ "pxefile_addr_r=0x10100000\0" \ "ramdisk_addr_r=0x18080000\0" \ "scriptaddr=0x10000000\0" \ - "set_con_serial=setenv stdout serial; " \ - "setenv stderr serial\0" \ - "set_con_hdmi=setenv stdout serial,vidconsole; " \ - "setenv stderr serial,vidconsole\0" \ "stderr=serial,vidconsole\0" \ "stdin=serial,usbkbd\0" \ "stdout=serial,vidconsole\0"