From: Simon Glass Date: Sun, 6 Sep 2020 16:35:35 +0000 (-0600) Subject: x86: edison: Add documentation for using am xFSTK image X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=8c180d669a0f4a8eb70bde8c74c73cef45993f67;p=u-boot.git x86: edison: Add documentation for using am xFSTK image Add a description of how to flash Edison using the xFSTK tool. Signed-off-by: Simon Glass Reviewed-by: Andy Shevchenko --- diff --git a/doc/board/intel/edison.rst b/doc/board/intel/edison.rst index 1aee2a1fc0..d658fac02c 100644 --- a/doc/board/intel/edison.rst +++ b/doc/board/intel/edison.rst @@ -39,3 +39,123 @@ use. reset the board:: => reset + + +Updating U-Boot using xFSTK +--------------------------- + +You can also update U-Boot using the xfstk-dldr-solo tool if you can build it. +One way to do that is to follow the `xFSTK`_ instructions. You may need to use +a virtual machine running Ubuntu Trusty. Once you have built it and installed +libboost-all-dev, you can copy xfstk-dldr-solo to /usr/local/bin and +libboost_program_options.so.1.54.0 to /usr/lib/i386-linux-gnu/ and with luck +it will work. You might fine this `drive`_ helpful. + +If it does, then you can download and unpack the Edison reocovery image, +install dfu-util, reset your board and flash U-Boot like this:: + + $ xfstk-dldr-solo --gpflags 0x80000007 \ + --osimage u-boot-edison.img \ + --fwdnx recover/edison_dnx_fwr.bin \ + --fwimage recover/edison_ifwi-dbg-00.bin \ + --osdnx recover/edison_dnx_osr.bin + +This should show the following + +.. code-block:: none + + XFSTK Downloader Solo 0.0.0 + Copyright (c) 2015 Intel Corporation + Build date and time: Aug 15 2020 15:07:13 + + .Intel SoC Device Detection Found + Parsing Commandline.... + Registering Status Callback.... + .Initiating Download Process.... + .......(lots of dots)........XFSTK-STATUS--Reconnecting to device - Attempt #1 + .......(even more dots)...................... + + +You have about 10 seconds after resetting the board to type the above command. +If you want to check if the board is ready, type: + +.. code-block:: none + + lsusb |egrep "8087|8086" + Bus 001 Device 004: ID 8086:e005 Intel Corp. + +If you see a device with the same ID as above, the board is waiting for your +command. + +After about 5 seconds you should see some console output from the board: + +.. code-block:: none + + ****************************** + PSH KERNEL VERSION: b0182b2b + WR: 20104000 + ****************************** + + SCU IPC: 0x800000d0 0xfffce92c + + PSH miaHOB version: TNG.B0.VVBD.0000000c + + microkernel built 11:24:08 Feb 5 2015 + + ******* PSH loader ******* + PCM page cache size = 192 KB + Cache Constraint = 0 Pages + Arming IPC driver .. + Adding page store pool .. + PagestoreAddr(IMR Start Address) = 0x04899000 + pageStoreSize(IMR Size) = 0x00080000 + + *** Ready to receive application *** + + After another 10 seconds the xFSTK tool completes and the board resets. About + 10 seconds after that should see the above message again and then within a + few seconds U-Boot should start on your board: + +.. code-block:: none + + U-Boot 2020.10-rc3 (Sep 03 2020 - 18:44:28 -0600) + + CPU: Genuine Intel(R) CPU 4000 @ 500MHz + DRAM: 980.6 MiB + WDT: Started with servicing (60s timeout) + MMC: mmc@ff3fc000: 0, mmc@ff3fa000: 1 + Loading Environment from MMC... OK + In: serial + Out: serial + Err: serial + Saving Environment to MMC... Writing to redundant MMC(0)... OK + Saving Environment to MMC... Writing to MMC(0)... OK + Net: No ethernet found. + Hit any key to stop autoboot: 0 + Target:blank + Partitioning using GPT + Writing GPT: success! + Saving Environment to MMC... Writing to redundant MMC(0)... OK + Flashing already done... + 5442816 bytes read in 238 ms (21.8 MiB/s) + Valid Boot Flag + Setup Size = 0x00003c00 + Magic signature found + Using boot protocol version 2.0c + Linux kernel version 3.10.17-poky-edison+ (ferry@kalamata) #1 SMP PREEMPT Mon Jan 11 14:54:18 CET 2016 + Building boot_params at 0x00090000 + Loading bzImage at address 100000 (5427456 bytes) + Magic signature found + Kernel command line: "rootwait root=PARTUUID=ada722ed-6410-764e-8619-abff6f66e10e rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 g_multi.ethernet_config=cdc systemd.unit=multi-user.target hardware_id=00 g_multi.iSerialNumber=2249baf774c675598661a63098c0ad41 g_multi.dev_addr=02:00:86:c0:ad:41 platform_mrfld_audio.audio_codec=dummy" + Magic signature found + + Starting kernel ... + + ... + + Poky (Yocto Project Reference Distro) 1.7.2 edison ttyMFD2 + + edison login: + +.. _xFSTK: https://community.intel.com/t5/Intel-Makers/Building-xFSTK-on-Ubuntu-14-04-32-bit-for-flashing-Edison/td-p/538081 +.. _drive: https://drive.google.com/drive/u/0/folders/1URPHrOk9-UBsh8hjv-7WwC0W6Fy61uAJ