From: Lokesh Vutla Date: Mon, 27 Aug 2018 10:29:09 +0000 (+0530) Subject: arm64: dts: k3: Add u-boot specific nodes X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=853f7f5018d9b67b6039a78127c44e2daa467204;p=u-boot.git arm64: dts: k3: Add u-boot specific nodes Add the minimum dt nodes required to boot. These nodes will get deleted as kernel gets these nodes added in the main dts files. Reviewed-by: Tom Rini Signed-off-by: Lokesh Vutla --- diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi new file mode 100644 index 0000000000..d4ecb3be10 --- /dev/null +++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include + +/ { + chosen { + stdout-path = "serial2:115200n8"; + }; + + aliases { + serial2 = &main_uart0; + }; +}; + +&cbass_main{ + u-boot,dm-spl; + secure_proxy: secure_proxy@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x32c00000 0x100000>, + <0x32400000 0x100000>, + <0x32800000 0x100000>; + interrupt-names = "rx_011"; + interrupts = ; + }; + + dmsc: dmsc { + compatible = "ti,k2g-sci"; + ti,host-id = <12>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + /* + * In case of rare platforms that does not use am6 as + * system master, use /delete-property/ + */ + ti,system-reboot-controller; + mbox-names = "rx", "tx"; + + mboxes= <&secure_proxy 11>, + <&secure_proxy 13>; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <1>; + }; + + k3_clks: clocks { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + + k3_sysreset: sysreset-controller { + compatible = "ti,sci-sysreset"; + }; + }; + + main_pmx0: pinmux@11c000 { + compatible = "pinctrl-single"; + reg = <0x11c000 0x2e4>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_pmx1: pinmux@11c2e8 { + compatible = "pinctrl-single"; + reg = <0x11c2e8 0x24>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_uart0: serial@2800000 { + compatible = "ti,am654-uart", "ti,omap4-uart", "ns16550a"; + reg = <0x02800000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clock-frequency = <48000000>; + current-speed = <115200>; + status = "disabled"; + u-boot,dm-pre-reloc; + }; + + sdhci0: sdhci@04F80000 { + compatible = "arasan,sdhci-5.1"; + reg = <0x4F80000 0x1000>, + <0x4F90000 0x400>; + clocks = <&k3_clks 47 1>; + power-domains = <&k3_pds 47>; + max-frequency = <25000000>; + }; + + sdhci1: sdhci@04FA0000 { + compatible = "arasan,sdhci-5.1"; + reg = <0x4FA0000 0x1000>, + <0x4FB0000 0x400>; + clocks = <&k3_clks 48 1>; + power-domains = <&k3_pds 48>; + max-frequency = <25000000>; + }; + +}; + +&secure_proxy { + u-boot,dm-spl; +}; + +&dmsc { + u-boot,dm-spl; +}; + +&k3_pds { + u-boot,dm-spl; +}; + +&k3_clks { + u-boot,dm-spl; +}; + +&k3_reset { + u-boot,dm-spl; +}; + +&main_pmx0 { + u-boot,dm-spl; + main_uart0_pins_default: main_uart0_pins_default { + pinctrl-single,pins = < + AM65X_IOPAD(0x01e4, PIN_INPUT | MUX_MODE0) /* (AF11) UART0_RXD */ + AM65X_IOPAD(0x01e8, PIN_OUTPUT | MUX_MODE0) /* (AE11) UART0_TXD */ + AM65X_IOPAD(0x01ec, PIN_INPUT | MUX_MODE0) /* (AG11) UART0_CTSn */ + AM65X_IOPAD(0x01f0, PIN_OUTPUT | MUX_MODE0) /* (AD11) UART0_RTSn */ + >; + }; + + main_mmc0_pins_default: main_mmc0_pins_default { + pinctrl-single,pins = < + AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* (B25) MMC0_CLK */ + AM65X_IOPAD(0x01aC, PIN_INPUT_PULLUP | MUX_MODE0) /* (B27) MMC0_CMD */ + AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* (A26) MMC0_DAT0 */ + AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP | MUX_MODE0) /* (E25) MMC0_DAT1 */ + AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C26) MMC0_DAT2 */ + AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP | MUX_MODE0) /* (A25) MMC0_DAT3 */ + AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP | MUX_MODE0) /* (E24) MMC0_DAT4 */ + AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP | MUX_MODE0) /* (A24) MMC0_DAT5 */ + AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP | MUX_MODE0) /* (B26) MMC0_DAT6 */ + AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP | MUX_MODE0) /* (D25) MMC0_DAT7 */ + AM65X_IOPAD(0x01b0, PIN_INPUT | MUX_MODE0) /* (C25) MMC0_DS */ + >; + }; + + main_mmc1_pins_default: main_mmc1_pins_default { + pinctrl-single,pins = < + AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* (C27) MMC1_CLK */ + AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP | MUX_MODE0) /* (C28) MMC1_CMD */ + AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP | MUX_MODE0) /* (D28) MMC1_DAT0 */ + AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP | MUX_MODE0) /* (E27) MMC1_DAT1 */ + AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP | MUX_MODE0) /* (D26) MMC1_DAT2 */ + AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP | MUX_MODE0) /* (D27) MMC1_DAT3 */ + AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP | MUX_MODE0) /* (B24) MMC1_SDCD */ + AM65X_IOPAD(0x02e0, PIN_INPUT | MUX_MODE0) /* (C24) MMC1_SDWP */ + >; + }; + +}; + +&main_pmx1 { + u-boot,dm-spl; +}; + +&main_uart0 { + u-boot,dm-spl; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + status = "okay"; +}; + +&sdhci0 { + u-boot,dm-spl; + status = "okay"; + non-removable; + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; +}; + +&sdhci1 { + u-boot,dm-spl; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + sdhci-caps-mask = <0x7 0x0>; +}; diff --git a/include/dt-bindings/pinctrl/k3-am65.h b/include/dt-bindings/pinctrl/k3-am65.h new file mode 100644 index 0000000000..c86c9fd4ce --- /dev/null +++ b/include/dt-bindings/pinctrl/k3-am65.h @@ -0,0 +1,49 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for TI K3-AM65 pinctrl bindings. + * + * Copyright (C) 2018 Texas Instruments + */ +#ifndef _DT_BINDINGS_PINCTRL_TI_K3_AM65_H +#define _DT_BINDINGS_PINCTRL_TI_K3_AM65_H + +/* K3 mux mode options for each pin. See TRM for options */ +#define MUX_MODE0 0 +#define MUX_MODE1 1 +#define MUX_MODE2 2 +#define MUX_MODE3 3 +#define MUX_MODE4 4 +#define MUX_MODE5 5 +#define MUX_MODE6 6 +#define MUX_MODE7 7 +#define MUX_MODE15 15 + +#define PULL_DISABLE (1 << 16) +#define PULL_UP (1 << 17) +#define INPUT_EN (1 << 18) +#define SLEWCTRL_200MHZ 0 +#define SLEWCTRL_150MHZ (1 << 19) +#define SLEWCTRL_100MHZ (2 << 19) +#define SLEWCTRL_50MHZ (3 << 19) +#define TX_DIS (1 << 21) +#define ISO_OVR (1 << 22) +#define ISO_BYPASS (1 << 23) +#define DS_EN (1 << 24) +#define DS_INPUT (1 << 25) +#define DS_FORCE_OUT_HIGH (1 << 26) +#define DS_PULL_UP_DOWN_EN 0 +#define DS_PULL_UP_DOWN_DIS (1 << 27) +#define DS_PULL_UP_SEL (1 << 28) +#define WAKEUP_ENABLE (1 << 29) + +#define PIN_OUTPUT (PULL_DISABLE) +#define PIN_OUTPUT_PULLUP (PULL_UP) +#define PIN_OUTPUT_PULLDOWN 0 +#define PIN_INPUT (INPUT_EN | PULL_DISABLE) +#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP) +#define PIN_INPUT_PULLDOWN (INPUT_EN) + +#define AM65X_IOPAD(pa, val) (((pa) & 0x1fff)) (val) +#define AM65X_WKUP_IOPAD(pa, val) (((pa) & 0x1fff)) (val) + +#endif