From: Michal Simek Date: Wed, 14 Oct 2020 15:08:14 +0000 (+0200) Subject: xilinx: common: Move ZYNQ_GEM_I2C_MAC_OFFSET to board Kconfig X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=83594f3c01c1afb765f8e2b08feea10f24c01d7f;p=u-boot.git xilinx: common: Move ZYNQ_GEM_I2C_MAC_OFFSET to board Kconfig There is no reason to have ZYNQ specific Kconfig macro in generic location to be visible for all other SoCs. That's why move it to Xilinx common location to be visible only for us. Also introduce new bool entry ZYNQ_MAC_IN_EEPROM to have also an option to disable it or enable. This has connection to code which is reading the whole content of i2c and also work with the rest of date not just with MAC address. Signed-off-by: Michal Simek --- diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig index c80d0a8812..01d7f8eac1 100644 --- a/board/xilinx/Kconfig +++ b/board/xilinx/Kconfig @@ -56,3 +56,20 @@ config BOOT_SCRIPT_OFFSET default 0x7F80000 if ARCH_VERSAL help Specifies distro boot script offset in NAND/NOR flash. + +config ZYNQ_MAC_IN_EEPROM + bool "Reading MAC address from EEPROM" + help + Enable this option if your MAC address is saved in eeprom and + xlnx,eeprom DT property in chosen node points to it. + +if ZYNQ_MAC_IN_EEPROM + +config ZYNQ_GEM_I2C_MAC_OFFSET + hex "Set the I2C MAC offset" + default 0x0 + depends on DM_I2C + help + Set the MAC offset for i2C. + +endif diff --git a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig index 25282ba428..2426179d44 100644 --- a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig +++ b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig @@ -8,6 +8,8 @@ CONFIG_DEBUG_UART_BASE=0xff000000 CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQ_MAC_IN_EEPROM=y +CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xfa CONFIG_DEFAULT_DEVICE_TREE="avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0" CONFIG_DEBUG_UART=y CONFIG_DISTRO_DEFAULTS=y @@ -42,7 +44,6 @@ CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA954x=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y -CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xfa CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_SPI_FLASH_BAR=y diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig index 8f6900661a..276c476bae 100644 --- a/configs/syzygy_hub_defconfig +++ b/configs/syzygy_hub_defconfig @@ -9,6 +9,8 @@ CONFIG_SPL_STACK_R_ADDR=0x200000 CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xe0000000 CONFIG_DEBUG_UART_CLOCK=50000000 +CONFIG_ZYNQ_MAC_IN_EEPROM=y +CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA CONFIG_DEFAULT_DEVICE_TREE="zynq-syzygy-hub" CONFIG_DEBUG_UART=y CONFIG_DISTRO_DEFAULTS=y @@ -40,7 +42,6 @@ CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQPL=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y -CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y CONFIG_PHY_MARVELL=y diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 3233f34730..01b2f18a05 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -7,6 +7,8 @@ CONFIG_DM_GPIO=y CONFIG_SPL=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQ_MAC_IN_EEPROM=y +CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 CONFIG_ZYNQMP_USB=y CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC" CONFIG_AHCI=y @@ -91,7 +93,6 @@ CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y -CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 CONFIG_SYS_I2C_EEPROM_ADDR=0x0 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 CONFIG_SUPPORT_EMMC_BOOT=y diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index b67e906a76..29432ae7eb 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -376,13 +376,6 @@ config SPL_I2C_EEPROM This option is an SPL-variant of the I2C_EEPROM option. See the help of I2C_EEPROM for details. -config ZYNQ_GEM_I2C_MAC_OFFSET - hex "Set the I2C MAC offset" - default 0x0 - depends on DM_I2C - help - Set the MAC offset for i2C. - if I2C_EEPROM config SYS_I2C_EEPROM_ADDR