From: Benoît Thébaudeau Date: Fri, 3 May 2013 10:32:23 +0000 (+0000) Subject: imx: woodburn: Convert to iomux-v3 X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=8342cc37aa721dfb206316e2c9d98b8a177d32f9;p=u-boot.git imx: woodburn: Convert to iomux-v3 There is no change of behavior. Signed-off-by: Benoît Thébaudeau --- diff --git a/board/woodburn/woodburn.c b/board/woodburn/woodburn.c index 7c36af080e..3f2e6b52af 100644 --- a/board/woodburn/woodburn.c +++ b/board/woodburn/woodburn.c @@ -28,8 +28,7 @@ #include #include #include -#include -#include +#include #include #include #include @@ -74,25 +73,29 @@ static void board_setup_sdram(void) static void setup_iomux_fec(void) { + static const iomux_v3_cfg_t fec_pads[] = { + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, + }; + /* setup pins for FEC */ - mxc_request_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RDATA0, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TDATA0, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TX_EN, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TX_ERR, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RX_ERR, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_CRS, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RDATA1, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TDATA1, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RDATA2, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TDATA2, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RDATA3, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TDATA3, MUX_CONFIG_FUNC); + imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); } int woodburn_init(void) @@ -130,9 +133,9 @@ int woodburn_init(void) setup_iomux_fec(); /* setup GPIO1_4 FEC_ENABLE signal */ - mxc_request_iomux(MX35_PIN_SCKR, MUX_CONFIG_ALT5); + imx_iomux_v3_setup_pad(MX35_PAD_SCKR__GPIO1_4); gpio_direction_output(4, 1); - mxc_request_iomux(MX35_PIN_HCKT, MUX_CONFIG_ALT5); + imx_iomux_v3_setup_pad(MX35_PAD_HCKT__GPIO1_9); gpio_direction_output(9, 1); return 0; @@ -228,22 +231,24 @@ struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR}; int board_mmc_init(bd_t *bis) { + static const iomux_v3_cfg_t sdhc1_pads[] = { + MX35_PAD_SD1_CMD__ESDHC1_CMD, + MX35_PAD_SD1_CLK__ESDHC1_CLK, + MX35_PAD_SD1_DATA0__ESDHC1_DAT0, + MX35_PAD_SD1_DATA1__ESDHC1_DAT1, + MX35_PAD_SD1_DATA2__ESDHC1_DAT2, + MX35_PAD_SD1_DATA3__ESDHC1_DAT3, + }; + /* configure pins for SDHC1 only */ - mxc_request_iomux(MX35_PIN_SD1_CMD, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_SD1_CLK, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_SD1_DATA0, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_SD1_DATA1, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC); + imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads)); /* MMC Card Detect on GPIO1_7 */ - mxc_request_iomux(MX35_PIN_SCKT, MUX_CONFIG_ALT5); - mxc_iomux_set_input(MUX_IN_GPIO1_IN_7, 0x1); + imx_iomux_v3_setup_pad(MX35_PAD_SCKT__GPIO1_7); gpio_direction_input(GPIO_MMC_CD); /* MMC Write Protection on GPIO1_8 */ - mxc_request_iomux(MX35_PIN_FST, MUX_CONFIG_ALT5); - mxc_iomux_set_input(MUX_IN_GPIO1_IN_8, 0x1); + imx_iomux_v3_setup_pad(MX35_PAD_FST__GPIO1_8); gpio_direction_input(GPIO_MMC_WP); esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);