From: Marek Vasut Date: Sat, 13 Jan 2024 17:57:27 +0000 (+0100) Subject: ARM: stm32: Set stdio to serial on DH STM32MP15xx DHSOM X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=82f5942e51b96ffdfd689ec8b4cbfab5c9b15f7d;p=u-boot.git ARM: stm32: Set stdio to serial on DH STM32MP15xx DHSOM In case CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV are enabled, the console stdin, stdout, stderr must be defined in environment. Define the default settings to fix the following warning on boot: " In: No input devices available! Out: No output devices available! Err: No error devices available! " Sort the default environment as well. Signed-off-by: Marek Vasut Reviewed-by: Patrice Chotard --- diff --git a/include/configs/stm32mp15_dh_dhsom.h b/include/configs/stm32mp15_dh_dhsom.h index 8ff882264f..de39b19219 100644 --- a/include/configs/stm32mp15_dh_dhsom.h +++ b/include/configs/stm32mp15_dh_dhsom.h @@ -12,14 +12,13 @@ #define PHY_ANEG_TIMEOUT 20000 #ifdef CONFIG_SPL_BUILD -#define CFG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "dfu_alt_info_ram=u-boot.itb ram " \ __stringify(CONFIG_SPL_LOAD_FIT_ADDRESS) \ " 0x800000\0" #endif -#define STM32MP_BOARD_EXTRA_ENV \ - "usb_pgood_delay=1000\0" \ +#define STM32MP_BOARD_EXTRA_ENV \ "dh_update_sd_to_emmc=" /* Install U-Boot from SD to eMMC */ \ "setexpr loadaddr1 ${loadaddr} + 0x1000000 && " \ "load mmc 0:4 ${loadaddr1} boot/u-boot-spl.stm32 && " \ @@ -49,7 +48,11 @@ "sf update ${loadaddr1} 0x40000 ${filesize1} && " \ "sf update ${loadaddr} 0x80000 ${filesize} && " \ "env set filesize1 && env set loadaddr1\0" \ - "update_sf=run dh_update_sd_to_sf\0" + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" \ + "update_sf=run dh_update_sd_to_sf\0" \ + "usb_pgood_delay=1000\0" #include