From: Ulises Cardenas <Ulises.Cardenas@freescale.com>
Date: Mon, 20 Apr 2015 18:47:58 +0000 (-0500)
Subject: Fix mxc_hab documenation
X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=8148b824492e7696a9e72bb5b715720db8fd889e;p=u-boot.git

Fix mxc_hab documenation

It is necessary to modify the configuration file for the target
board. It wasn't well documented that to enable any of the secure
boot modes, it is required to add CONFIG_SECURE_BOOT to the board
configuration file.

Also, fixed a typo in the encrypted boot section.

Signed-off-by: Ulises Cardenas <Ulises.Cardenas@freescale.com>
---

diff --git a/doc/README.mxc_hab b/doc/README.mxc_hab
index a1b1d348ed..b688580f75 100644
--- a/doc/README.mxc_hab
+++ b/doc/README.mxc_hab
@@ -1,7 +1,13 @@
 High Assurance Boot (HAB) for i.MX6 CPUs
 
-To authenticate U-Boot only by the CPU there is no code required in
-U-Boot itself. However, the U-Boot image to be programmed into the
+To enable the authenticated or encrypted boot mode of U-Boot, it is
+required to set the proper configuration for the target board. This
+is done by adding the following configuration in in the proper config
+file (e.g. include/configs/mx6qarm2.h)
+
+#define CONFIG_SECURE_BOOT
+
+In addition, the U-Boot image to be programmed into the
 boot media needs to be properly constructed, i.e. it must contain a
 proper Command Sequence File (CSF).
 
@@ -69,7 +75,7 @@ CONFIG_SECURE_BOOT
 CONFIG_SYS_FSL_SEC_COMPAT    4 /* HAB version */
 CONFIG_FSL_CAAM
 CONFIG_CMD_DEKBLOB
-CONFIG_SYS_FSL_LE
+CONFIG_SYS_FSL_SEC_LE
 
 Note: The encrypted boot feature is only supported by HABv4 or
 greater.