From: Peng Fan <van.freenix@gmail.com>
Date: Tue, 3 May 2016 02:02:22 +0000 (+0800)
Subject: dm: spi: introduce dm api
X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=7a3eff4ce962de50bd9a1d83a9fce178c04999d3;p=u-boot.git

dm: spi: introduce dm api

Introduce dm_spi_claim_bus, dm_spi_release_bus and dm_spi_xfer
Convert spi_claim_bus, spi_release_bus and spi_xfer to use
the new API.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Jagan Teki <jteki@openedev.com>
Acked-by: Simon Glass <sjg@chromium.org>
---

diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c
index 5561f36762..84b6786517 100644
--- a/drivers/spi/spi-uclass.c
+++ b/drivers/spi/spi-uclass.c
@@ -45,12 +45,12 @@ static int spi_set_speed_mode(struct udevice *bus, int speed, int mode)
 	return 0;
 }
 
-int spi_claim_bus(struct spi_slave *slave)
+int dm_spi_claim_bus(struct udevice *dev)
 {
-	struct udevice *dev = slave->dev;
 	struct udevice *bus = dev->parent;
 	struct dm_spi_ops *ops = spi_get_ops(bus);
 	struct dm_spi_bus *spi = dev_get_uclass_priv(bus);
+	struct spi_slave *slave = dev_get_parent_priv(dev);
 	int speed;
 	int ret;
 
@@ -73,9 +73,8 @@ int spi_claim_bus(struct spi_slave *slave)
 	return ops->claim_bus ? ops->claim_bus(dev) : 0;
 }
 
-void spi_release_bus(struct spi_slave *slave)
+void dm_spi_release_bus(struct udevice *dev)
 {
-	struct udevice *dev = slave->dev;
 	struct udevice *bus = dev->parent;
 	struct dm_spi_ops *ops = spi_get_ops(bus);
 
@@ -83,10 +82,9 @@ void spi_release_bus(struct spi_slave *slave)
 		ops->release_bus(dev);
 }
 
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
-	     const void *dout, void *din, unsigned long flags)
+int dm_spi_xfer(struct udevice *dev, unsigned int bitlen,
+		const void *dout, void *din, unsigned long flags)
 {
-	struct udevice *dev = slave->dev;
 	struct udevice *bus = dev->parent;
 
 	if (bus->uclass->uc_drv->id != UCLASS_SPI)
@@ -95,6 +93,22 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
 	return spi_get_ops(bus)->xfer(dev, bitlen, dout, din, flags);
 }
 
+int spi_claim_bus(struct spi_slave *slave)
+{
+	return dm_spi_claim_bus(slave->dev);
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+	dm_spi_release_bus(slave->dev);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+	     const void *dout, void *din, unsigned long flags)
+{
+	return dm_spi_xfer(slave->dev, bitlen, dout, din, flags);
+}
+
 static int spi_post_bind(struct udevice *dev)
 {
 	/* Scan the bus for devices */
diff --git a/include/spi.h b/include/spi.h
index 4b88d3986e..ca96fa4b31 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -612,6 +612,58 @@ int sandbox_spi_get_emul(struct sandbox_state *state,
 			 struct udevice *bus, struct udevice *slave,
 			 struct udevice **emulp);
 
+/**
+ * Claim the bus and prepare it for communication with a given slave.
+ *
+ * This must be called before doing any transfers with a SPI slave. It
+ * will enable and initialize any SPI hardware as necessary, and make
+ * sure that the SCK line is in the correct idle state. It is not
+ * allowed to claim the same bus for several slaves without releasing
+ * the bus in between.
+ *
+ * @dev:	The SPI slave device
+ *
+ * Returns: 0 if the bus was claimed successfully, or a negative value
+ * if it wasn't.
+ */
+int dm_spi_claim_bus(struct udevice *dev);
+
+/**
+ * Release the SPI bus
+ *
+ * This must be called once for every call to dm_spi_claim_bus() after
+ * all transfers have finished. It may disable any SPI hardware as
+ * appropriate.
+ *
+ * @slave:	The SPI slave device
+ */
+void dm_spi_release_bus(struct udevice *dev);
+
+/**
+ * SPI transfer
+ *
+ * This writes "bitlen" bits out the SPI MOSI port and simultaneously clocks
+ * "bitlen" bits in the SPI MISO port.  That's just the way SPI works.
+ *
+ * The source of the outgoing bits is the "dout" parameter and the
+ * destination of the input bits is the "din" parameter.  Note that "dout"
+ * and "din" can point to the same memory location, in which case the
+ * input data overwrites the output data (since both are buffered by
+ * temporary variables, this is OK).
+ *
+ * dm_spi_xfer() interface:
+ * @dev:	The SPI slave device which will be sending/receiving the data.
+ * @bitlen:	How many bits to write and read.
+ * @dout:	Pointer to a string of bits to send out.  The bits are
+ *		held in a byte array and are sent MSB first.
+ * @din:	Pointer to a string of bits that will be filled in.
+ * @flags:	A bitwise combination of SPI_XFER_* flags.
+ *
+ * Returns: 0 on success, not 0 on failure
+ */
+int dm_spi_xfer(struct udevice *dev, unsigned int bitlen,
+		const void *dout, void *din, unsigned long flags);
+
 /* Access the operations for a SPI device */
 #define spi_get_ops(dev)	((struct dm_spi_ops *)(dev)->driver->ops)
 #define spi_emul_get_ops(dev)	((struct dm_spi_emul_ops *)(dev)->driver->ops)