From: Santan Kumar Date: Fri, 18 Aug 2017 09:50:32 +0000 (+0530) Subject: board/ls2081ardb: Update QSPI flash type from n25q512a to s25fs512s X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=77dc01bdc155a133871c0965ff7d012cac2c3a53;p=u-boot.git board/ls2081ardb: Update QSPI flash type from n25q512a to s25fs512s As per updated board design, different QSPI flash is connected on boards, hence change QSPI flash type from Micron n25q512a device to spansion s25fs512s device in dts and config. Signed-off-by: Santan Kumar Signed-off-by: Yogesh Gaur Signed-off-by: Priyanka Jain Reviewed-by: York Sun --- diff --git a/arch/arm/dts/fsl-ls2081a-rdb.dts b/arch/arm/dts/fsl-ls2081a-rdb.dts index 6489362fc0..aa4aa68c9c 100644 --- a/arch/arm/dts/fsl-ls2081a-rdb.dts +++ b/arch/arm/dts/fsl-ls2081a-rdb.dts @@ -41,7 +41,7 @@ bus-num = <0>; status = "okay"; - qflash0: n25q512a@0 { + qflash0: s25fs512s@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-flash"; @@ -49,7 +49,7 @@ reg = <0>; }; - qflash1: n25q512a@1 { + qflash1: s25fs512s@1 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-flash"; diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index e301228335..8a89375a57 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -288,19 +288,15 @@ unsigned long get_board_sys_clk(void); /* SPI */ #if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI) #define CONFIG_SPI_FLASH -#ifdef CONFIG_FSL_QSPI +#ifdef CONFIG_FSL_DSPI #define CONFIG_SPI_FLASH_STMICRO #endif #ifdef CONFIG_FSL_QSPI -#ifdef CONFIG_TARGET_LS2081ARDB -#define CONFIG_SPI_FLASH_STMICRO -#else #define CONFIG_SPI_FLASH_SPANSION #endif #define FSL_QSPI_FLASH_SIZE SZ_64M /* 64MB */ #define FSL_QSPI_FLASH_NUM 2 #endif -#endif /* * RTC configuration