From: Sergiu Moga Date: Fri, 13 May 2022 15:13:40 +0000 (+0300) Subject: configs: at91: sam9x60ek: enable QSPI and SF command X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=76873c6f6df1c81fca107bad7bf75990ad64586c;p=u-boot.git configs: at91: sam9x60ek: enable QSPI and SF command Add the configurations required for enabling QSPI and the SF command to allow changes to be made dynamically to serial flash devices from the command line interface. Signed-off-by: Sergiu Moga Reviewed-by: Tudor Ambarus --- diff --git a/configs/sam9x60ek_mmc_defconfig b/configs/sam9x60ek_mmc_defconfig index 9c9166c16c..718db00a11 100644 --- a/configs/sam9x60ek_mmc_defconfig +++ b/configs/sam9x60ek_mmc_defconfig @@ -37,6 +37,7 @@ CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_SF_TEST=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y # CONFIG_CMD_SETEXPR is not set @@ -67,6 +68,8 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ATMEL=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y +CONFIG_SF_DEFAULT_MODE=0x0 +CONFIG_SF_DEFAULT_SPEED=50000000 CONFIG_NAND_ATMEL=y CONFIG_ATMEL_NAND_HW_PMECC=y CONFIG_PMECC_CAP=8 @@ -88,3 +91,13 @@ CONFIG_W1_GPIO=y CONFIG_W1_EEPROM=y CONFIG_W1_EEPROM_DS24XXX=y CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_SPI_FLASH=y +CONFIG_DM_SPI_FLASH=y +CONFIG_ATMEL_QSPI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y +CONFIG_SPI_FLASH_MTD=y diff --git a/configs/sam9x60ek_nandflash_defconfig b/configs/sam9x60ek_nandflash_defconfig index f07725de36..00ce9df1a6 100644 --- a/configs/sam9x60ek_nandflash_defconfig +++ b/configs/sam9x60ek_nandflash_defconfig @@ -37,6 +37,7 @@ CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y +CONFIG_CMD_SF_TEST=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND=y CONFIG_CMD_NAND_TRIMFFS=y @@ -73,6 +74,15 @@ CONFIG_ATMEL_NAND_HW_PMECC=y CONFIG_PMECC_CAP=8 CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_PHY_MICREL=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SF_DEFAULT_BUS=0 +CONFIG_SF_DEFAULT_SPEED=50000000 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_ATMEL=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_DM_ETH=y CONFIG_MACB=y CONFIG_PINCTRL=y @@ -82,6 +92,9 @@ CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y CONFIG_SYSRESET=y CONFIG_SYSRESET_AT91=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_QSPI=y CONFIG_TIMER=y CONFIG_ATMEL_PIT_TIMER=y CONFIG_W1=y