From: Hayes Wang <hayeswang@realtek.com>
Date: Wed, 16 Dec 2020 09:03:23 +0000 (+0800)
Subject: eth/r8152: fix the aggregation issue
X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=72294407726e9652f4ab44add3dbd118797683d1;p=u-boot.git

eth/r8152: fix the aggregation issue

Remove the redundant setting for USB_RX_EARLY_SIZE. Besides, for
RTL8153B, it is necessary to notify the hardware of the changes
of the aggregation settings.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---

diff --git a/drivers/usb/eth/r8152.c b/drivers/usb/eth/r8152.c
index 82a05a9c35..5f309192b4 100644
--- a/drivers/usb/eth/r8152.c
+++ b/drivers/usb/eth/r8152.c
@@ -447,6 +447,12 @@ static void rtl8152_set_rx_mode(struct r8152 *tp)
 	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
 }
 
+static inline void r8153b_rx_agg_chg_indicate(struct r8152 *tp)
+{
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_UPT_RXDMA_OWN,
+		       OWN_UPDATE | OWN_CLEAR);
+}
+
 static int rtl_enable(struct r8152 *tp)
 {
 	u32 ocp_data;
@@ -457,6 +463,15 @@ static int rtl_enable(struct r8152 *tp)
 	ocp_data |= PLA_CR_RE | PLA_CR_TE;
 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
 
+	switch (tp->version) {
+	case RTL_VER_08:
+	case RTL_VER_09:
+		r8153b_rx_agg_chg_indicate(tp);
+		break;
+	default:
+		break;
+	}
+
 	rxdy_gated_en(tp, false);
 
 	rtl8152_set_rx_mode(tp);
@@ -525,8 +540,6 @@ static void r8153_set_rx_early_size(struct r8152 *tp)
 		debug("** %s Invalid Device\n", __func__);
 		break;
 	}
-
-	ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data);
 }
 
 static int rtl8153_enable(struct r8152 *tp)
diff --git a/drivers/usb/eth/r8152.h b/drivers/usb/eth/r8152.h
index fa57e42502..45172c055f 100644
--- a/drivers/usb/eth/r8152.h
+++ b/drivers/usb/eth/r8152.h
@@ -92,6 +92,7 @@
 #define USB_PM_CTRL_STATUS	0xd432	/* RTL8153A */
 #define USB_RX_EXTRA_AGGR_TMR	0xd432	/* RTL8153B */
 #define USB_TX_DMA		0xd434
+#define USB_UPT_RXDMA_OWN	0xd437
 #define USB_TOLERANCE		0xd490
 #define USB_LPM_CTRL		0xd41a
 #define USB_BMU_RESET		0xd4b0
@@ -346,6 +347,10 @@
 #define BMU_RESET_EP_IN		0x01
 #define BMU_RESET_EP_OUT	0x02
 
+/* USB_UPT_RXDMA_OWN */
+#define OWN_UPDATE		BIT(0)
+#define OWN_CLEAR		BIT(1)
+
 /* USB_UPS_CTRL */
 #define POWER_CUT		0x0100