From: Simon Glass <sjg@chromium.org>
Date: Mon, 30 Sep 2024 01:49:34 +0000 (-0600)
Subject: xpl: Rename u_boot_first_phase to xpl_is_first_phase()
X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=713bfc58f948e46e0e01ff8b50ef9f30f6f8317c;p=u-boot.git

xpl: Rename u_boot_first_phase to xpl_is_first_phase()

This is a better name for this function, so update it.

Tidy up the function comment to mention VPL.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c
index abdc1e4033..548d6b7cfe 100644
--- a/arch/arm/mach-omap2/am33xx/board.c
+++ b/arch/arm/mach-omap2/am33xx/board.c
@@ -526,7 +526,7 @@ EVENT_SPY_SIMPLE(EVT_DM_POST_INIT_F, am33xx_dm_post_init);
 #ifdef CONFIG_DEBUG_UART_BOARD_INIT
 void board_debug_uart_init(void)
 {
-	if (u_boot_first_phase()) {
+	if (xpl_is_first_phase()) {
 		hw_data_init();
 		set_uart_mux_conf();
 		setup_early_clocks();
diff --git a/common/bloblist.c b/common/bloblist.c
index 2008ab4d25..fb86789df4 100644
--- a/common/bloblist.c
+++ b/common/bloblist.c
@@ -504,13 +504,13 @@ int bloblist_init(void)
 	 * If U-Boot is not in the first phase, an existing bloblist must be
 	 * at a fixed address.
 	 */
-	bool from_addr = fixed && !u_boot_first_phase();
+	bool from_addr = fixed && !xpl_is_first_phase();
 	/*
 	 * If U-Boot is in the first phase that an arch custom routine should
 	 * install the bloblist passed from previous loader to this fixed
 	 * address.
 	 */
-	bool from_boot_arg = fixed && u_boot_first_phase();
+	bool from_boot_arg = fixed && xpl_is_first_phase();
 
 	if (spl_prev_phase() == PHASE_TPL && !IS_ENABLED(CONFIG_TPL_BLOBLIST))
 		from_addr = false;
diff --git a/common/spl/spl.c b/common/spl/spl.c
index c13b2b8f71..9c3bba4825 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -464,13 +464,13 @@ static int spl_common_init(bool setup_malloc)
 		gd->malloc_ptr = 0;
 	}
 #endif
-	ret = bootstage_init(u_boot_first_phase());
+	ret = bootstage_init(xpl_is_first_phase());
 	if (ret) {
 		debug("%s: Failed to set up bootstage: ret=%d\n", __func__,
 		      ret);
 		return ret;
 	}
-	if (!u_boot_first_phase()) {
+	if (!xpl_is_first_phase()) {
 		ret = bootstage_unstash_default();
 		if (ret)
 			log_debug("Failed to unstash bootstage: ret=%d\n", ret);
diff --git a/include/spl.h b/include/spl.h
index de808ccd41..fa87d865f5 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -34,18 +34,20 @@ struct spl_boot_device;
 enum boot_device;
 
 /*
- * u_boot_first_phase() - check if this is the first U-Boot phase
+ * xpl_is_first_phase() - check if this is the first U-Boot phase
  *
- * U-Boot has up to three phases: TPL, SPL and U-Boot proper. Depending on the
- * build flags we can determine whether the current build is for the first
+ * U-Boot has up to four phases: TPL, VPL, SPL and U-Boot proper. Depending on
+ * the build flags we can determine whether the current build is for the first
  * phase of U-Boot or not. If there is no SPL, then this is U-Boot proper. If
  * there is SPL but no TPL, the the first phase is SPL. If there is TPL, then
- * it is the first phase.
+ * it is the first phase, etc.
  *
- * @returns true if this is the first phase of U-Boot
+ * Note that VPL can never be the first phase. If it exists, it is loaded from
+ * TPL
  *
+ * Return: true if this is the first phase of U-Boot
  */
-static inline bool u_boot_first_phase(void)
+static inline bool xpl_is_first_phase(void)
 {
 	if (IS_ENABLED(CONFIG_TPL)) {
 		if (IS_ENABLED(CONFIG_TPL_BUILD))