From: Christian Hewitt Date: Fri, 18 Dec 2020 08:45:45 +0000 (+0000) Subject: boards: amlogic: update documentation for Beelink GT-King/Pro X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=702b8300f028f646297d0a606a0cc6f47a98c921;p=u-boot.git boards: amlogic: update documentation for Beelink GT-King/Pro Update the device matrix and add build instructions. Signed-off-by: Christian Hewitt Signed-off-by: Neil Armstrong --- diff --git a/doc/board/amlogic/beelink-gtking.rst b/doc/board/amlogic/beelink-gtking.rst new file mode 100644 index 0000000000..56ce2cb273 --- /dev/null +++ b/doc/board/amlogic/beelink-gtking.rst @@ -0,0 +1,115 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Beelink GT-King +========================== + +The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference +board with an S922X-H chip. + +- 4GB LPDDR4 RAM +- 64GB eMMC storage +- 10/100/1000 Base-T Ethernet +- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) +- HDMI 2.1 video +- S/PDIF optical output +- Analogue audio output +- 1x USB 2.0 port +- 2x USB 3.0 ports +- IR receiver +- 1x micro SD card slot + +Beelink do not provide public schematics, but have been willing +to share them with known distro developers on request. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make beelink-gtking_defconfig + $ make + +Image creation +-------------- + +Amlogic does not provide sources for the firmware and for tools needed +to create the bootloader image. Beelink have provided the Amlogic "SDK" +in their forums, but the u-boot sources included result in 2GB RAM being +detected. The following FIPs were generated with newer private sources +and give correct (4GB) RAM detection: + +https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x + +NB: Beelink use a common board config for GT-King, GT-King Pro and the +GS-King-X model, hence the "beelink-s922x" name. + +.. code-block:: bash + + $ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip + $ unzip master.zip + $ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x + +Go back to the mainline U-Boot source tree then: + +.. code-block:: bash + + $ mkdir fip + $ cp $FIPDIR/* fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + $ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ fip/aml_encrypt_g12b --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --level v3 + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/beelink-gtkingpro.rst b/doc/board/amlogic/beelink-gtkingpro.rst new file mode 100644 index 0000000000..d750351361 --- /dev/null +++ b/doc/board/amlogic/beelink-gtkingpro.rst @@ -0,0 +1,116 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Beelink GT-King Pro +============================== + +The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400 reference +board with an S922X-H chip. + +- 4GB LPDDR4 RAM +- 64GB eMMC storage +- 10/100/1000 Base-T Ethernet +- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) +- HDMI 2.1 video +- Analogue audio output +- 1x RS232 port +- 2x USB 2.0 port +- 2x USB 3.0 ports +- IR receiver +- 1x SD card slot +- 1x Power on/off button + +Beelink do not provide public schematics, but have been willing +to share them with known distro developers on request. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make beelink-gtkingpro_defconfig + $ make + +Image creation +-------------- + +Amlogic does not provide sources for the firmware and for tools needed +to create the bootloader image. Beelink have provided the Amlogic "SDK" +in their forums, but the u-boot sources included result in 2GB RAM being +detected. The following FIPs were generated with newer private sources +and give correct (4GB) RAM detection: + +https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x + +NB: Beelink use a common board config for GT-King, GT-King Pro and the +GS-King-X model, hence the "beelink-s922x" name. + +.. code-block:: bash + + $ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip + $ unzip master.zip + $ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x + +Go back to the mainline U-Boot source tree then: + +.. code-block:: bash + + $ mkdir fip + $ cp $FIPDIR/* fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + $ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ fip/aml_encrypt_g12b --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --level v3 + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst index a585d857df..275c3664b7 100644 --- a/doc/board/amlogic/index.rst +++ b/doc/board/amlogic/index.rst @@ -17,7 +17,7 @@ This matrix concerns the actual source code version. +===============================+===========+=================+==============+============+============+=============+==============+ | Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 | | | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L | -| | P200 | LibreTech-CC v1 | WeTek Core2 | | | | Odroid-C4 | +| | P200 | LibreTech-CC v1 | WeTek Core2 | | | GT-King/Pro | Odroid-C4 | | | P201 | LibreTech-AC v2 | | | | | | +-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+ | UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | @@ -77,6 +77,8 @@ Board Documentation .. toctree:: :maxdepth: 1 + beelink-gtking + beelink-gtkingpro khadas-vim2 khadas-vim3l khadas-vim3