From: Michal Simek Date: Wed, 4 Nov 2020 15:14:06 +0000 (+0100) Subject: microblaze: Detect NOR flash based on DT X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=631a241e4884579774ff6bad60ff3cadf28f80e6;p=u-boot.git microblaze: Detect NOR flash based on DT Remove fixed configuration and detect flash based on DT. Also increase amount of flash sectors to 2048 because on kc705 flash has 1027 sectors. Bank # 1: CFI conformant flash (16 x 16) Size: 128 MB in 1027 Sectors Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x8962 Erase timeout: 4096 ms, write timeout: 2 ms Buffer write timeout: 5 ms, buffer size: 1024 bytes Signed-off-by: Michal Simek --- diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig index 08c88856dc..761cc65cbf 100644 --- a/configs/microblaze-generic_defconfig +++ b/configs/microblaze-generic_defconfig @@ -48,8 +48,10 @@ CONFIG_DM_I2C=y CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_MTD=y +CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index c31a788074..bc0bf04973 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -11,26 +11,11 @@ /* Microblaze is microblaze_0 */ #define XILINX_FSL_NUMBER 3 -/* Flash Memory is FLASH_2Mx32 */ -#define XILINX_FLASH_START 0x2c000000 -#define XILINX_FLASH_SIZE 0x00800000 - /* MicroBlaze CPU */ #define MICROBLAZE_V5 1 #define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024) -/* linear and spi flash memory */ -#ifdef XILINX_FLASH_START -#define FLASH -#undef SPIFLASH -#undef RAMENV /* hold environment in flash */ -#else -#undef FLASH -#undef SPIFLASH -#define RAMENV /* hold environment in RAM */ -#endif - /* uart */ /* The following table includes the supported baudrates */ # define CONFIG_SYS_BAUDRATE_TABLE \ @@ -45,34 +30,14 @@ #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_F_LEN) -/* - * CFI flash memory layout - Example - * CONFIG_SYS_FLASH_BASE = 0x2200_0000; - * CONFIG_SYS_FLASH_SIZE = 0x0080_0000; 8MB - * - * SECT_SIZE = 0x20000; 128kB is one sector - * CONFIG_ENV_SIZE = SECT_SIZE; 128kB environment store - * - * 0x2200_0000 CONFIG_SYS_FLASH_BASE - * FREE 256kB - * 0x2204_0000 CONFIG_ENV_ADDR - * ENV_AREA 128kB - * 0x2206_0000 - * FREE - * 0x2280_0000 CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - * - */ - -#ifdef FLASH -# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START -# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE +#ifdef CONFIG_CFI_FLASH /* ?empty sector */ # define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* max number of memory banks */ # define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of sectors on one chip */ -# define CONFIG_SYS_MAX_FLASH_SECT 512 -#endif /* !FLASH */ +# define CONFIG_SYS_MAX_FLASH_SECT 2048 +#endif #define CONFIG_ICACHE #define CONFIG_DCACHE