From: Masahiro Yamada <yamada.masahiro@socionext.com>
Date: Thu, 9 Jul 2020 06:08:13 +0000 (+0900)
Subject: ARM: uniphier: consolidate SoC select menu
X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=56d463bdbaae90d8d6aa34b7abd4f56b73641810;p=u-boot.git

ARM: uniphier: consolidate SoC select menu

Currently, the supports for the following two ARMv7 SoC groups
are exclusive, because the boot ROM loads the SPL to a different
address:

 - LD4, sLD8                 (SPL is loaded at 0x00040000)
 - Pro4, Pro5, PXs2, LD6b    (SPL is loaded at 0x00100000)

This limitation exists only when CONFIG_SPL=y.

Instead of using crappy CONFIG options, checking SPL and SPL_TEXT_BASE
is cleaner.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index bfb445a602..e125f50fa6 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -3,24 +3,15 @@ if ARCH_UNIPHIER
 config SYS_CONFIG_NAME
 	default "uniphier"
 
-config ARCH_UNIPHIER_32BIT
-	bool
-	select ARCH_SUPPORT_PSCI
-	select ARMV7_NONSEC
-	select CPU_V7A
-	select CPU_V7_HAS_NONSEC
-
 choice
         prompt "UniPhier SoC select"
-        default ARCH_UNIPHIER_V7_MULTI
-
-config ARCH_UNIPHIER_LD4_SLD8
-	bool "UniPhier LD4/sLD8 SoCs"
-	select ARCH_UNIPHIER_32BIT
 
 config ARCH_UNIPHIER_V7_MULTI
-	bool "UniPhier Pro4/Pro5/PXs2/LD6b SoCs"
-	select ARCH_UNIPHIER_32BIT
+	bool "UniPhier V7 SoCs"
+	select ARCH_SUPPORT_PSCI
+	select ARMV7_NONSEC
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC
 
 config ARCH_UNIPHIER_V8_MULTI
 	bool "UniPhier V8 SoCs"
@@ -32,32 +23,38 @@ endchoice
 
 config ARCH_UNIPHIER_LD4
 	bool "Enable UniPhier LD4 SoC support"
-	depends on ARCH_UNIPHIER_LD4_SLD8
+	depends on ARCH_UNIPHIER_V7_MULTI
+	depends on !SPL || SPL_TEXT_BASE = 0x00040000
 	default y
 
 config ARCH_UNIPHIER_SLD8
 	bool "Enable UniPhier sLD8 SoC support"
-	depends on ARCH_UNIPHIER_LD4_SLD8
+	depends on ARCH_UNIPHIER_V7_MULTI
+	depends on !SPL || SPL_TEXT_BASE = 0x00040000
 	default y
 
 config ARCH_UNIPHIER_PRO4
 	bool "Enable UniPhier Pro4 SoC support"
 	depends on ARCH_UNIPHIER_V7_MULTI
+	depends on !SPL || SPL_TEXT_BASE = 0x00100000
 	default y
 
 config ARCH_UNIPHIER_PRO5
 	bool "Enable UniPhier Pro5 SoC support"
 	depends on ARCH_UNIPHIER_V7_MULTI
+	depends on !SPL || SPL_TEXT_BASE = 0x00100000
 	default y
 
 config ARCH_UNIPHIER_PXS2
 	bool "Enable UniPhier Pxs2 SoC support"
 	depends on ARCH_UNIPHIER_V7_MULTI
+	depends on !SPL || SPL_TEXT_BASE = 0x00100000
 	default y
 
 config ARCH_UNIPHIER_LD6B
 	bool "Enable UniPhier LD6b SoC support"
 	depends on ARCH_UNIPHIER_V7_MULTI
+	depends on !SPL || SPL_TEXT_BASE = 0x00100000
 	default y
 
 config ARCH_UNIPHIER_LD11
@@ -78,7 +75,7 @@ config ARCH_UNIPHIER_PXS3
 
 config CACHE_UNIPHIER
 	bool "Enable the UniPhier L2 cache controller"
-	depends on ARCH_UNIPHIER_32BIT
+	depends on ARCH_UNIPHIER_V7_MULTI
 	default y
 	select SYS_CACHE_SHIFT_7
 	help
@@ -118,5 +115,5 @@ config CMD_DDRMPHY_DUMP
 	  training; it is useful for the evaluation of DDR Multi PHY training.
 
 config SYS_SOC
-	default "uniphier-v7" if ARCH_UNIPHIER_LD4_SLD8 || ARCH_UNIPHIER_V7_MULTI
+	default "uniphier-v7" if ARCH_UNIPHIER_V7_MULTI
 endif
diff --git a/configs/uniphier_ld4_sld8_defconfig b/configs/uniphier_ld4_sld8_defconfig
index 2e809cacb5..cb1e8c9bb7 100644
--- a/configs/uniphier_ld4_sld8_defconfig
+++ b/configs/uniphier_ld4_sld8_defconfig
@@ -8,7 +8,6 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_SPL=y
-CONFIG_ARCH_UNIPHIER_LD4_SLD8=y
 CONFIG_MICRO_SUPPORT_CARD=y
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot"