From: Algapally Santosh Sagar Date: Thu, 31 Aug 2023 06:59:06 +0000 (+0200) Subject: xilinx: board: Add support to pick bootscr address from DT X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=5528f79778473b19917fbaea41e8f6ad0f943ca5;p=u-boot.git xilinx: board: Add support to pick bootscr address from DT The bootscript is expected at a default address specific to each platform. When high speed memory like Programmable Logic Double Data Rate RAM (PL DDR RAM) or Higher Bandwidth Memory RAM (HBM) is used the boot.scr may be loaded at a different offset. The offset needs to be set through setenv. Due to the default values in some cases the boot.scr is falling in between the kernel partition. The bootscript address or the bootscript offset is fetched directly from the DT and updated in the environment making it easier for automated flows. Signed-off-by: Algapally Santosh Sagar Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/fac7020b31e1f150b021d666f0d588579ea671ad.1693465140.git.michal.simek@amd.com --- diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c index 2caeb32470..720dcd040f 100644 --- a/board/xilinx/common/board.c +++ b/board/xilinx/common/board.c @@ -414,9 +414,25 @@ int board_late_init_xilinx(void) if (!IS_ENABLED(CONFIG_MICROBLAZE)) { ulong scriptaddr; - - scriptaddr = env_get_hex("scriptaddr", 0); - ret |= env_set_hex("scriptaddr", gd->ram_base + scriptaddr); + u64 bootscr_address; + u64 bootscr_offset; + + /* Fetch bootscr_address/bootscr_offset from DT and update */ + if (!ofnode_read_bootscript_address(&bootscr_address, + &bootscr_offset)) { + if (bootscr_offset) + ret |= env_set_hex("scriptaddr", + gd->ram_base + + bootscr_offset); + else + ret |= env_set_hex("scriptaddr", + bootscr_address); + } else { + /* Update scriptaddr(bootscr offset) from env */ + scriptaddr = env_get_hex("scriptaddr", 0); + ret |= env_set_hex("scriptaddr", + gd->ram_base + scriptaddr); + } } if (IS_ENABLED(CONFIG_ARCH_ZYNQ) || IS_ENABLED(CONFIG_MICROBLAZE))