From: Marek Vasut Date: Tue, 21 May 2024 10:48:26 +0000 (+0200) Subject: imx: hab: Use nxp_imx8mcst etype for i.MX8M flash.bin signing X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=52dc74feab49f5f0641b9662a06fe98a66a5c437;p=u-boot.git imx: hab: Use nxp_imx8mcst etype for i.MX8M flash.bin signing Update documentation and use nxp_imx8mcst binman etype for signing of flash.bin instead of previous horrible shell scripting. Reviewed-by: Tim Harvey Signed-off-by: Marek Vasut --- diff --git a/doc/imx/habv4/csf_examples/mx8m/csf.sh b/doc/imx/habv4/csf_examples/mx8m/csf.sh deleted file mode 100644 index cd3b2614a2..0000000000 --- a/doc/imx/habv4/csf_examples/mx8m/csf.sh +++ /dev/null @@ -1,92 +0,0 @@ -#!/bin/sh - -# 0) Generate keys -# -# WARNING: ECDSA keys are only supported by HAB 4.5 and newer (i.e. i.MX8M Plus) -# -# cd /path/to/cst-3.3.1/keys/ -# ./hab4_pki_tree.sh -existing-ca n -use-ecc n -kl 4096 -duration 10 -num-srk 4 -srk-ca y -# cd /path/to/cst-3.3.1/crts/ -# ../linux64/bin/srktool -h 4 -t SRK_1_2_3_4_table.bin -e SRK_1_2_3_4_fuse.bin -d sha256 -c ./SRK1_sha256_4096_65537_v3_ca_crt.pem,./SRK2_sha256_4096_65537_v3_ca_crt.pem,./SRK3_sha256_4096_65537_v3_ca_crt.pem,./SRK4_sha256_4096_65537_v3_ca_crt.pem -f 1 - -# 1) Build U-Boot (e.g. for i.MX8MM) -# -# cp -Lv /path/to/arm-trusted-firmware/build/imx8mm/release/bl31.bin . -# cp -Lv /path/to/firmware-imx-8.14/firmware/ddr/synopsys/ddr3* . -# make -j imx8mm_board_defconfig -# make -j`nproc` flash.bin - -# 2) Sign SPL and DRAM blobs - -cp doc/imx/habv4/csf_examples/mx8m/csf_spl.txt csf_spl.tmp -cp doc/imx/habv4/csf_examples/mx8m/csf_fit.txt csf_fit.tmp - -# update File Paths from env vars -if ! [ -r $CSF_KEY ]; then - echo "Error: \$CSF_KEY not found" - exit 1 -fi -if ! [ -r $IMG_KEY ]; then - echo "Error: \$IMG_KEY not found" - exit 1 -fi -if ! [ -r $SRK_TABLE ]; then - echo "Error: \$SRK_TABLE not found" - exit 1 -fi -sed -i "s:\$CSF_KEY:$CSF_KEY:" csf_spl.tmp -sed -i "s:\$IMG_KEY:$IMG_KEY:" csf_spl.tmp -sed -i "s:\$SRK_TABLE:$SRK_TABLE:" csf_spl.tmp -sed -i "s:\$CSF_KEY:$CSF_KEY:" csf_fit.tmp -sed -i "s:\$IMG_KEY:$IMG_KEY:" csf_fit.tmp -sed -i "s:\$SRK_TABLE:$SRK_TABLE:" csf_fit.tmp - -# update SPL Blocks -spl_block_base=$(printf "0x%x" $(( $(sed -n "/CONFIG_SPL_TEXT_BASE=/ s@.*=@@p" .config) - 0x40)) ) -spl_block_size=$(printf "0x%x" $(stat -tc %s u-boot-spl-ddr.bin)) -sed -i "/Blocks = / s@.*@ Blocks = $spl_block_base 0x0 $spl_block_size \"flash.bin\"@" csf_spl.tmp - -# Generate CSF blob -cst -i csf_spl.tmp -o csf_spl.bin - -# Patch CSF blob into flash.bin -spl_csf_offset=$(xxd -s 24 -l 4 -e flash.bin | cut -d " " -f 2 | sed "s@^@0x@") -spl_bin_offset=$(xxd -s 4 -l 4 -e flash.bin | cut -d " " -f 2 | sed "s@^@0x@") -spl_dd_offset=$((${spl_csf_offset} - ${spl_bin_offset} + 0x40)) -dd if=csf_spl.bin of=flash.bin bs=1 seek=${spl_dd_offset} conv=notrunc - -# 3) Sign u-boot.itb - -# fitImage -fit_block_base=$(printf "0x%x" $(sed -n "/CONFIG_SPL_LOAD_FIT_ADDRESS=/ s@.*=@@p" .config) ) -fit_block_offset=$(printf "0x%s" $(fdtget -t x u-boot.dtb /binman/imx-boot/uboot offset)) -fit_block_size=$(printf "0x%x" $(( ( ( $(stat -tc %s u-boot.itb) + 0x1000 - 0x1 ) & ~(0x1000 - 0x1)) + 0x20 )) ) -sed -i "/Blocks = / s@.*@ Blocks = $fit_block_base $fit_block_offset $fit_block_size \"flash.bin\"@" csf_fit.tmp - -# IVT -ivt_ptr_base=$(printf "%08x" ${fit_block_base} | sed "s@\(..\)\(..\)\(..\)\(..\)@0x\4\3\2\1@") -ivt_block_base=$(printf "%08x" $(( ${fit_block_base} + ${fit_block_size} - 0x20 )) | sed "s@\(..\)\(..\)\(..\)\(..\)@0x\4\3\2\1@") -csf_block_base=$(printf "%08x" $(( ${fit_block_base} + ${fit_block_size} )) | sed "s@\(..\)\(..\)\(..\)\(..\)@0x\4\3\2\1@") -ivt_block_offset=$((${fit_block_offset} + ${fit_block_size} - 0x20)) -csf_block_offset=$((${ivt_block_offset} + 0x20)) - -echo "0xd1002041 ${ivt_block_base} 0x00000000 0x00000000 0x00000000 ${ivt_block_base} ${csf_block_base} 0x00000000" | xxd -r -p > ivt.bin -dd if=ivt.bin of=flash.bin bs=1 seek=${ivt_block_offset} conv=notrunc - -# Generate CSF blob -cst -i csf_fit.tmp -o csf_fit.bin - -# When loading flash.bin via USB, we must ensure that the file being -# served is as large as the target expects (see -# board_spl_fit_size_align()), otherwise the target will hang in -# rom_api_download_image() waiting for the remaining bytes. -# -# Note that in order for dd to actually extend the file, one must not -# pass conv=notrunc here. With a non-zero seek= argument, dd is -# documented to preserve the contents of the file seeked past; in -# particular, dd does not open the file with O_TRUNC. -CSF_SIZE=$(sed -n "/CONFIG_CSF_SIZE=/ s@.*=@@p" .config) -dd if=/dev/null of=csf_fit.bin bs=1 seek=$((CSF_SIZE - 0x20)) count=0 - -# Patch CSF blob into flash.bin -dd if=csf_fit.bin of=flash.bin bs=1 seek=${csf_block_offset} conv=notrunc diff --git a/doc/imx/habv4/csf_examples/mx8m/csf_fit.txt b/doc/imx/habv4/csf_examples/mx8m/csf_fit.txt deleted file mode 100644 index 97f3eea573..0000000000 --- a/doc/imx/habv4/csf_examples/mx8m/csf_fit.txt +++ /dev/null @@ -1,30 +0,0 @@ -[Header] - Version = 4.3 - Hash Algorithm = sha256 - Engine = CAAM - Engine Configuration = 0 - Certificate Format = X509 - Signature Format = CMS - -[Install SRK] - # SRK_TABLE is full path to SRK_1_2_3_4_table.bin - File = "$SRK_TABLE" - Source index = 0 - -[Install CSFK] - # CSF_KEY is full path to CSF1_1_sha256_4096_65537_v3_usr_crt.pem - File = "$CSF_KEY" - -[Authenticate CSF] - -[Install Key] - Verification index = 0 - Target Index = 2 - # IMG_KEY is full path to IMG1_1_sha256_4096_65537_v3_usr_crt.pem - File = "$IMG_KEY" - -[Authenticate Data] - Verification index = 2 - # FIXME: - # Line 1 -- fitImage - Blocks = CONFIG_SPL_LOAD_FIT_ADDRESS 0x57c00 0xffff "flash.bin" diff --git a/doc/imx/habv4/csf_examples/mx8m/csf_spl.txt b/doc/imx/habv4/csf_examples/mx8m/csf_spl.txt deleted file mode 100644 index 88fa420a5f..0000000000 --- a/doc/imx/habv4/csf_examples/mx8m/csf_spl.txt +++ /dev/null @@ -1,33 +0,0 @@ -[Header] - Version = 4.3 - Hash Algorithm = sha256 - Engine = CAAM - Engine Configuration = 0 - Certificate Format = X509 - Signature Format = CMS - -[Install SRK] - # SRK_TABLE is full path to SRK_1_2_3_4_table.bin - File = "$SRK_TABLE" - Source index = 0 - -[Install CSFK] - # CSF_KEY is full path to CSF1_1_sha256_4096_65537_v3_usr_crt.pem - File = "$CSF_KEY" - -[Authenticate CSF] - -[Unlock] - Engine = CAAM - Features = MID - -[Install Key] - Verification index = 0 - Target Index = 2 - # IMG_KEY is full path to IMG1_1_sha256_4096_65537_v3_usr_crt.pem - File = "$IMG_KEY" - -[Authenticate Data] - Verification index = 2 - # FIXME: Adjust start (first column) and size (third column) here - Blocks = 0x7e0fc0 0x0 0x306f0 "flash.bin" diff --git a/doc/imx/habv4/guides/mx8m_spl_secure_boot.txt b/doc/imx/habv4/guides/mx8m_spl_secure_boot.txt index e16e5410bd..257ffb4565 100644 --- a/doc/imx/habv4/guides/mx8m_spl_secure_boot.txt +++ b/doc/imx/habv4/guides/mx8m_spl_secure_boot.txt @@ -121,6 +121,9 @@ build configuration: - Defconfig: CONFIG_IMX_HAB=y + CONFIG_FSL_CAAM=y + CONFIG_ARCH_MISC_INIT=y + CONFIG_SPL_CRYPTO=y - Kconfig: @@ -131,91 +134,42 @@ build configuration: The CSF contains all the commands that the HAB executes during the secure boot. These commands instruct the HAB code on which memory areas of the image -to authenticate, which keys to install, use and etc. - -CSF examples are available under doc/imx/habv4/csf_examples/ directory. - -CSF "Blocks" line for csf_spl.txt can be generated as follows: - -``` -spl_block_base=$(printf "0x%x" $(( $(sed -n "/CONFIG_SPL_TEXT_BASE=/ s@.*=@@p" .config) - 0x40)) ) -spl_block_size=$(printf "0x%x" $(stat -tc %s u-boot-spl-ddr.bin)) -sed -i "/Blocks = / s@.*@ Blocks = $spl_block_base 0x0 $spl_block_size \"flash.bin\"@" csf_spl.txt -``` - -The resulting line looks as follows: -``` - Blocks = 0x7e0fc0 0x0 0x306f0 "flash.bin" -``` - -The columns mean: - - CONFIG_SPL_TEXT_BASE - 0x40 -- Start address of signed data, in DRAM - - 0x0 -- Start address of signed data, in "flash.bin" - - 0x306f0 -- Length of signed data, in "flash.bin" - - Filename -- "flash.bin" - -To generate signature for the SPL part of flash.bin container, use CST: -``` -cst -i csf_spl.tmp -o csf_spl.bin -``` - -The newly generated CST blob has to be patched into existing flash.bin -container. Conveniently, flash.bin IVT contains physical address of the -CSF blob. Remember, the SPL part of flash.bin container is loaded by the -BootROM at CONFIG_SPL_TEXT_BASE - 0x40 , so the offset of CSF blob in -the fitImage can be calculated and inserted into the flash.bin in the -correct location as follows: -``` -# offset = IVT_HEADER[6 = CSF address] - CONFIG_SPL_TEXT_BASE - 0x40 -spl_csf_offset=$(xxd -s 24 -l 4 -e flash.bin | cut -d " " -f 2 | sed "s@^@0x@") -spl_bin_offset=$(xxd -s 4 -l 4 -e flash.bin | cut -d " " -f 2 | sed "s@^@0x@") -spl_dd_offset=$((${spl_csf_offset} - ${spl_bin_offset} + 0x40)) -dd if=csf_spl.bin of=flash.bin bs=1 seek=${spl_dd_offset} conv=notrunc -``` - -CSF "Blocks" line for csf_fit.txt can be generated as follows: -``` -# fitImage -fit_block_base=$(printf "0x%x" $(sed -n "/CONFIG_SPL_LOAD_FIT_ADDRESS=/ s@.*=@@p" .config) ) -fit_block_offset=$(printf "0x%s" $(fdtget -t x u-boot.dtb /binman/imx-boot/uboot offset)) -fit_block_size=$(printf "0x%x" $(( ( ( $(stat -tc %s u-boot.itb) + 0x1000 - 0x1 ) & ~(0x1000 - 0x1)) + 0x20 )) ) -sed -i "/Blocks = / s@.*@ Blocks = $fit_block_base $fit_block_offset $fit_block_size \"flash.bin\"@" csf_fit.tmp -``` - -The fitImage part of flash.bin requires separate IVT. Generate the IVT and -patch it into the correct aligned location of flash.bin as follows: -``` -# IVT -ivt_ptr_base=$(printf "%08x" ${fit_block_base} | sed "s@\(..\)\(..\)\(..\)\(..\)@0x\4\3\2\1@") -ivt_block_base=$(printf "%08x" $(( ${fit_block_base} + ${fit_block_size} - 0x20 )) | sed "s@\(..\)\(..\)\(..\)\(..\)@0x\4\3\2\1@") -csf_block_base=$(printf "%08x" $(( ${fit_block_base} + ${fit_block_size} )) | sed "s@\(..\)\(..\)\(..\)\(..\)@0x\4\3\2\1@") -ivt_block_offset=$((${fit_block_offset} + ${fit_block_size} - 0x20)) -csf_block_offset=$((${ivt_block_offset} + 0x20)) - -echo "0xd1002041 ${ivt_block_base} 0x00000000 0x00000000 0x00000000 ${ivt_block_base} ${csf_block_base} 0x00000000" | xxd -r -p > ivt.bin -dd if=ivt.bin of=flash.bin bs=1 seek=${ivt_block_offset} conv=notrunc -``` - -To generate CSF signature for the fitImage part of flash.bin container, use CST: -``` -cst -i csf_fit.tmp -o csf_fit.bin -``` - -Finally, patch the CSF signature into the fitImage right past the IVT: -``` -dd if=csf_fit.bin of=flash.bin bs=1 seek=${csf_block_offset} conv=notrunc -``` - -The entire script is available in doc/imx/habv4/csf_examples/mx8m/csf.sh -and can be used as follows to modify flash.bin to be signed -(adjust paths as needed): +to authenticate, which keys to install, use and etc. The CSF is generated +using the CST Code Signing Tool based on input configuration file. This tool +input configuration file is generated using binman, and the tool is invoked +from binman as well. + +The SPL and fitImage sections of the generated image are signed separately. +The signing is activated by wrapping SPL and fitImage sections into nxp-imx8mcst +etype, which is done automatically in arch/arm/dts/imx8m{m,n,p,q}-u-boot.dtsi +in case CONFIG_IMX_HAB Kconfig symbol is enabled. + +Build of flash.bin target then produces a signed flash.bin automatically. + +The nxp-imx8mcst etype is configurable using either DT properties or environment +variables. The following DT properties and environment variables are supported. +Note that environment variables override DT properties. + ++--------------------+-----------+------------------------------------------------------------------+ +| DT property | Variable | Description | ++====================+===========+==================================================================+ +| nxp,loader-address | | SPL base address | ++--------------------+-----------+------------------------------------------------------------------+ +| nxp,srk-table | SRK_TABLE | full path to SRK_1_2_3_4_table.bin | ++--------------------+-----------+------------------------------------------------------------------+ +| nxp,csf-crt | CSF_KEY | full path to the CSF Key CSF1_1_sha256_4096_65537_v3_usr_crt.pem | ++--------------------+-----------+------------------------------------------------------------------+ +| nxp,img-crt | IMG_KEY | full path to the IMG Key IMG1_1_sha256_4096_65537_v3_usr_crt.pem | ++--------------------+-----------+------------------------------------------------------------------+ + +Environment variables can be set as follows to point the build process +to external key material: ``` export CST_DIR=/usr/src/cst-3.3.1/ export CSF_KEY=$CST_DIR/crts/CSF1_1_sha256_4096_65537_v3_usr_crt.pem export IMG_KEY=$CST_DIR/crts/IMG1_1_sha256_4096_65537_v3_usr_crt.pem export SRK_TABLE=$CST_DIR/crts/SRK_1_2_3_4_table.bin -export PATH=$CST_DIR/linux64/bin:$PATH -/bin/sh doc/imx/habv4/csf_examples/mx8m/csf.sh +make flash.bin ``` 1.4 Closing the device