From: Bryan Brattlof Date: Fri, 29 Dec 2023 17:47:12 +0000 (-0600) Subject: arm: dts: k3-am654: remove duplicate sdhci0 pinmux node X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=52d87efd0203a13cee5568e55767a92959fbe728;p=u-boot.git arm: dts: k3-am654: remove duplicate sdhci0 pinmux node With the Linux and U-Boot board dtb files unified, we now have a duplicate sdhci0 pinmux node. Remove it Tested-by: Tom Rini Signed-off-by: Bryan Brattlof Reviewed-by: Nishanth Menon --- diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts index 3d599a5413..f28245b12b 100644 --- a/arch/arm/dts/k3-am654-r5-base-board.dts +++ b/arch/arm/dts/k3-am654-r5-base-board.dts @@ -140,22 +140,6 @@ }; &main_pmx0 { - main_mmc0_pins_default: main_mmc0_pins_default { - pinctrl-single,pins = < - AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */ - AM65X_IOPAD(0x01aC, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */ - AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */ - AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */ - AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */ - AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */ - AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */ - AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */ - AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */ - AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */ - AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */ - >; - }; - main_mmc1_pins_default: main_mmc1_pins_default { pinctrl-single,pins = < AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ @@ -182,12 +166,18 @@ pinctrl-0 = <&wkup_vtt_pins_default>; }; +/* + * MMC is probed to pull in firmware, so any clock + * or power-domain operation will fail as we do not + * have the firmware running at this point. Delete the + * power-domain properties to avoid making calls to + * SYSFW before it is loaded. Public ROM has already + * set it up for us anyway. + */ &sdhci0 { clock-names = "clk_xin"; clocks = <&clk_200mhz>; - pinctrl-0 = <&main_mmc0_pins_default>; /delete-property/ power-domains; - ti,driver-strength-ohm = <50>; }; &sdhci1 {