From: Neil Armstrong Date: Thu, 12 Oct 2017 13:50:30 +0000 (+0200) Subject: ARM: dts: Synchronize Amlogic from Linux Mainline 4.13.5 X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=486221564920e8fcb9a58854a485dac1f8f4d1d3;p=u-boot.git ARM: dts: Synchronize Amlogic from Linux Mainline 4.13.5 Synchronize the Amlogic ARM64 dts from mainline Linux 4.13.5 In the preparation of the support of the Amlogic P212 board, import the corresponding meson-gxl-s905x-p212.dts file. Signed-off-by: Neil Armstrong Reviewed-by: Beniamino Galvani --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 6db64f9101..cd540e99ea 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -54,7 +54,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3399-puma-ddr1866.dtb \ rv1108-evb.dtb dtb-$(CONFIG_ARCH_MESON) += \ - meson-gxbb-odroidc2.dtb + meson-gxbb-odroidc2.dtb \ + meson-gxl-s905x-p212.dtb dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ diff --git a/arch/arm/dts/meson-gx.dtsi b/arch/arm/dts/meson-gx.dtsi index 436b875060..738ed689ff 100644 --- a/arch/arm/dts/meson-gx.dtsi +++ b/arch/arm/dts/meson-gx.dtsi @@ -200,7 +200,7 @@ }; scpi_sensors: sensors { - compatible = "arm,scpi-sensors"; + compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors"; #thermal-sensor-cells = <1>; }; }; @@ -304,6 +304,15 @@ status = "disabled"; }; + spicc: spi@8d80 { + compatible = "amlogic,meson-gx-spicc"; + reg = <0x0 0x08d80 0x0 0x80>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spifc: spi@8c80 { compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc"; reg = <0x0 0x08c80 0x0 0x80>; @@ -391,7 +400,7 @@ }; pwm_AO_ab: pwm@550 { - compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; + compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm"; reg = <0x0 0x00550 0x0 0x10>; #pwm-cells = <3>; status = "disabled"; diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts b/arch/arm/dts/meson-gxbb-odroidc2.dts index 54a9c6a6b3..d147c853ab 100644 --- a/arch/arm/dts/meson-gxbb-odroidc2.dts +++ b/arch/arm/dts/meson-gxbb-odroidc2.dts @@ -137,16 +137,6 @@ }; }; -&scpi_clocks { - status = "disabled"; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - ðmac { status = "okay"; pinctrl-0 = <ð_rgmii_pins>; @@ -172,6 +162,33 @@ }; }; +&gpio_ao { + /* + * WARNING: The USB Hub on the Odroid-C2 needs a reset signal + * to be turned high in order to be detected by the USB Controller + * This signal should be handled by a USB specific power sequence + * in order to reset the Hub when USB bus is powered down. + */ + usb-hub { + gpio-hog; + gpios = ; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&i2c_A { + status = "okay"; + pinctrl-0 = <&i2c_a_pins>; + pinctrl-names = "default"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + &pinctrl_aobus { gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En", "USB HUB nRESET", "USB OTG Power En", @@ -223,55 +240,15 @@ ""; }; -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&i2c_A { - status = "okay"; - pinctrl-0 = <&i2c_a_pins>; - pinctrl-names = "default"; -}; - -&gpio_ao { - /* - * WARNING: The USB Hub on the Odroid-C2 needs a reset signal - * to be turned high in order to be detected by the USB Controller - * This signal should be handled by a USB specific power sequence - * in order to reset the Hub when USB bus is powered down. - */ - usb-hub { - gpio-hog; - gpios = ; - output-high; - line-name = "usb-hub-reset"; - }; -}; - -&usb0_phy { - status = "okay"; - phy-supply = <&usb_otg_pwr>; -}; - -&usb1_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; - &saradc { status = "okay"; vref-supply = <&vcc1v8>; }; +&scpi_clocks { + status = "disabled"; +}; + /* SD */ &sd_emmc_b { status = "okay"; @@ -309,3 +286,26 @@ vmmc-supply = <&vcc3v3>; vqmmc-supply = <&vcc1v8>; }; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb0_phy { + status = "okay"; + phy-supply = <&usb_otg_pwr>; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/dts/meson-gxbb.dtsi b/arch/arm/dts/meson-gxbb.dtsi index 86105a6969..17d3efdf14 100644 --- a/arch/arm/dts/meson-gxbb.dtsi +++ b/arch/arm/dts/meson-gxbb.dtsi @@ -97,13 +97,6 @@ }; }; -ðmac { - clocks = <&clkc CLKID_ETH>, - <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; -}; - &aobus { pinctrl_aobus: pinctrl@14 { compatible = "amlogic,meson-gxbb-aobus-pinctrl"; @@ -249,9 +242,119 @@ function = "spdif_out_ao"; }; }; + + ao_cec_pins: ao_cec { + mux { + groups = "ao_cec"; + function = "cec_ao"; + }; + }; + + ee_cec_pins: ee_cec { + mux { + groups = "ee_cec"; + function = "cec_ao"; + }; + }; + }; +}; + +&apb { + mali: gpu@c0000 { + compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; + reg = <0x0 0xc0000 0x0 0x40000>; + interrupts = , + , + , + , + , + , + , + , + , + ; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1", + "pp2", "ppmmu2"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + + /* + * Mali clocking is provided by two identical clock paths + * MALI_0 and MALI_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + */ + assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + <&clkc CLKID_MALI_0>, + <&clkc CLKID_MALI>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_MALI_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>; /* Do Nothing */ + }; +}; + +&cbus { + spifc: spi@8c80 { + compatible = "amlogic,meson-gxbb-spifc"; + reg = <0x0 0x08c80 0x0 0x80>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_SPI>; + status = "disabled"; + }; +}; + +ðmac { + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; +}; + +&hdmi_tx { + compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; + resets = <&reset RESET_HDMITX_CAPB3>, + <&reset RESET_HDMI_SYSTEM_RESET>, + <&reset RESET_HDMI_TX>; + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; + clock-names = "isfr", "iahb", "venci"; +}; + +&hiubus { + clkc: clock-controller@0 { + compatible = "amlogic,gxbb-clkc"; + #clock-cells = <1>; + reg = <0x0 0x0 0x0 0x3db>; }; }; +&hwrng { + clocks = <&clkc CLKID_RNG0>; + clock-names = "core"; +}; + +&i2c_A { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_AO { + clocks = <&clkc CLKID_AO_I2C>; +}; + +&i2c_B { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_C { + clocks = <&clkc CLKID_I2C>; +}; + &periphs { pinctrl_periphs: pinctrl@4b0 { compatible = "amlogic,meson-gxbb-periphs-pinctrl"; @@ -262,7 +365,7 @@ gpio: bank@4b0 { reg = <0x0 0x004b0 0x0 0x28>, <0x0 0x004e8 0x0 0x14>, - <0x0 0x00120 0x0 0x14>, + <0x0 0x00520 0x0 0x14>, <0x0 0x00430 0x0 0x40>; reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; @@ -290,6 +393,22 @@ }; }; + spi_pins: spi { + mux { + groups = "spi_miso", + "spi_mosi", + "spi_sclk"; + function = "spi"; + }; + }; + + spi_ss0_pins: spi-ss0 { + mux { + groups = "spi_ss0"; + function = "spi"; + }; + }; + sdcard_pins: sdcard { mux { groups = "sdcard_d0", @@ -521,67 +640,6 @@ }; }; -&hiubus { - clkc: clock-controller@0 { - compatible = "amlogic,gxbb-clkc"; - #clock-cells = <1>; - reg = <0x0 0x0 0x0 0x3db>; - }; -}; - -&apb { - mali: gpu@c0000 { - compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; - reg = <0x0 0xc0000 0x0 0x40000>; - interrupts = , - , - , - , - , - , - , - , - , - ; - interrupt-names = "gp", "gpmmu", "pp", "pmu", - "pp0", "ppmmu0", "pp1", "ppmmu1", - "pp2", "ppmmu2"; - clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; - clock-names = "bus", "core"; - - /* - * Mali clocking is provided by two identical clock paths - * MALI_0 and MALI_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - */ - assigned-clocks = <&clkc CLKID_MALI_0_SEL>, - <&clkc CLKID_MALI_0>, - <&clkc CLKID_MALI>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, - <0>, /* Do Nothing */ - <&clkc CLKID_MALI_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <666666666>, - <0>; /* Do Nothing */ - }; -}; - -&i2c_A { - clocks = <&clkc CLKID_I2C>; -}; - -&i2c_AO { - clocks = <&clkc CLKID_AO_I2C>; -}; - -&i2c_B { - clocks = <&clkc CLKID_I2C>; -}; - -&i2c_C { - clocks = <&clkc CLKID_I2C>; -}; - &saradc { compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc"; clocks = <&xtal>, @@ -613,6 +671,13 @@ clock-names = "core", "clkin0", "clkin1"; }; +&spicc { + clocks = <&clkc CLKID_SPICC>; + clock-names = "core"; + resets = <&reset RESET_PERIPHS_SPICC>; + num-cs = <1>; +}; + &spifc { clocks = <&clkc CLKID_SPI>; }; @@ -620,20 +685,3 @@ &vpu { compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; }; - -&hwrng { - clocks = <&clkc CLKID_RNG0>; - clock-names = "core"; -}; - -&hdmi_tx { - compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; - resets = <&reset RESET_HDMITX_CAPB3>, - <&reset RESET_HDMI_SYSTEM_RESET>, - <&reset RESET_HDMI_TX>; - reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; - clocks = <&clkc CLKID_HDMI_PCLK>, - <&clkc CLKID_CLK81>, - <&clkc CLKID_GCLK_VENCI_INT0>; - clock-names = "isfr", "iahb", "venci"; -}; diff --git a/arch/arm/dts/meson-gxl-mali.dtsi b/arch/arm/dts/meson-gxl-mali.dtsi new file mode 100644 index 0000000000..f06cc23469 --- /dev/null +++ b/arch/arm/dts/meson-gxl-mali.dtsi @@ -0,0 +1,43 @@ +/* + * Copyright (c) 2017 BayLibre SAS + * Author: Neil Armstrong + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +&apb { + mali: gpu@c0000 { + compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; + reg = <0x0 0xc0000 0x0 0x40000>; + interrupts = , + , + , + , + , + , + , + , + , + ; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1", + "pp2", "ppmmu2"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + + /* + * Mali clocking is provided by two identical clock paths + * MALI_0 and MALI_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + */ + assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + <&clkc CLKID_MALI_0>, + <&clkc CLKID_MALI>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_MALI_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>; /* Do Nothing */ + }; +}; diff --git a/arch/arm/dts/meson-gxl-s905x-p212.dts b/arch/arm/dts/meson-gxl-s905x-p212.dts new file mode 100644 index 0000000000..6ab17c1eee --- /dev/null +++ b/arch/arm/dts/meson-gxl-s905x-p212.dts @@ -0,0 +1,95 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxl-s905x-p212.dtsi" + +/ { + compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl"; + model = "Amlogic Meson GXL (S905X) P212 Development Board"; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +/* This UART is brought out to the DB9 connector */ +&uart_AO { + status = "okay"; +}; diff --git a/arch/arm/dts/meson-gxl-s905x-p212.dtsi b/arch/arm/dts/meson-gxl-s905x-p212.dtsi new file mode 100644 index 0000000000..f3eea8e89d --- /dev/null +++ b/arch/arm/dts/meson-gxl-s905x-p212.dtsi @@ -0,0 +1,173 @@ +/* + * Copyright (c) 2016 Martin Blumenstingl . + * Based on meson-gx-p23x-q20x.dtsi: + * - Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione + * - Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/* Common DTSI for devices which are based on the P212 reference board. */ + +#include "meson-gxl-s905x.dtsi" + +/ { + aliases { + serial0 = &uart_AO; + serial1 = &uart_A; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; +}; + +ðmac { + status = "okay"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/dts/meson-gxl-s905x.dtsi b/arch/arm/dts/meson-gxl-s905x.dtsi new file mode 100644 index 0000000000..3314a0b3da --- /dev/null +++ b/arch/arm/dts/meson-gxl-s905x.dtsi @@ -0,0 +1,55 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "meson-gxl.dtsi" +#include "meson-gxl-mali.dtsi" + +/ { + compatible = "amlogic,s905x", "amlogic,meson-gxl"; +}; + +/* S905X only has access to its internal PHY */ +ðmac { + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; diff --git a/arch/arm/dts/meson-gxl.dtsi b/arch/arm/dts/meson-gxl.dtsi new file mode 100644 index 0000000000..8d4f3160a0 --- /dev/null +++ b/arch/arm/dts/meson-gxl.dtsi @@ -0,0 +1,628 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "meson-gx.dtsi" +#include +#include +#include + +/ { + compatible = "amlogic,meson-gxl"; +}; + +ðmac { + reg = <0x0 0xc9410000 0x0 0x10000 + 0x0 0xc8834540 0x0 0x4>; + + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; +}; + +&aobus { + pinctrl_aobus: pinctrl@14 { + compatible = "amlogic,meson-gxl-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank@14 { + reg = <0x0 0x00014 0x0 0x8>, + <0x0 0x0002c 0x0 0x4>, + <0x0 0x00024 0x0 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 0 14>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + + uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { + mux { + groups = "uart_cts_ao_a", + "uart_rts_ao_a"; + function = "uart_ao"; + }; + }; + + uart_ao_b_pins: uart_ao_b { + mux { + groups = "uart_tx_ao_b", "uart_rx_ao_b"; + function = "uart_ao_b"; + }; + }; + + uart_ao_b_0_1_pins: uart_ao_b_0_1 { + mux { + groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1"; + function = "uart_ao_b"; + }; + }; + + uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts { + mux { + groups = "uart_cts_ao_b", + "uart_rts_ao_b"; + function = "uart_ao_b"; + }; + }; + + remote_input_ao_pins: remote_input_ao { + mux { + groups = "remote_input_ao"; + function = "remote_input_ao"; + }; + }; + + i2c_ao_pins: i2c_ao { + mux { + groups = "i2c_sck_ao", + "i2c_sda_ao"; + function = "i2c_ao"; + }; + }; + + pwm_ao_a_3_pins: pwm_ao_a_3 { + mux { + groups = "pwm_ao_a_3"; + function = "pwm_ao_a"; + }; + }; + + pwm_ao_a_8_pins: pwm_ao_a_8 { + mux { + groups = "pwm_ao_a_8"; + function = "pwm_ao_a"; + }; + }; + + pwm_ao_b_pins: pwm_ao_b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + }; + }; + + pwm_ao_b_6_pins: pwm_ao_b_6 { + mux { + groups = "pwm_ao_b_6"; + function = "pwm_ao_b"; + }; + }; + + i2s_out_ch23_ao_pins: i2s_out_ch23_ao { + mux { + groups = "i2s_out_ch23_ao"; + function = "i2s_out_ao"; + }; + }; + + i2s_out_ch45_ao_pins: i2s_out_ch45_ao { + mux { + groups = "i2s_out_ch45_ao"; + function = "i2s_out_ao"; + }; + }; + + spdif_out_ao_6_pins: spdif_out_ao_6 { + mux { + groups = "spdif_out_ao_6"; + function = "spdif_out_ao"; + }; + }; + + spdif_out_ao_9_pins: spdif_out_ao_9 { + mux { + groups = "spdif_out_ao_9"; + function = "spdif_out_ao"; + }; + }; + + ao_cec_pins: ao_cec { + mux { + groups = "ao_cec"; + function = "cec_ao"; + }; + }; + + ee_cec_pins: ee_cec { + mux { + groups = "ee_cec"; + function = "cec_ao"; + }; + }; + }; +}; + +&hdmi_tx { + compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; + resets = <&reset RESET_HDMITX_CAPB3>, + <&reset RESET_HDMI_SYSTEM_RESET>, + <&reset RESET_HDMI_TX>; + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; + clock-names = "isfr", "iahb", "venci"; +}; + +&hiubus { + clkc: clock-controller@0 { + compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc"; + #clock-cells = <1>; + reg = <0x0 0x0 0x0 0x3db>; + }; +}; + +&i2c_A { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_AO { + clocks = <&clkc CLKID_AO_I2C>; +}; + +&i2c_B { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_C { + clocks = <&clkc CLKID_I2C>; +}; + +&periphs { + pinctrl_periphs: pinctrl@4b0 { + compatible = "amlogic,meson-gxl-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@4b0 { + reg = <0x0 0x004b0 0x0 0x28>, + <0x0 0x004e8 0x0 0x14>, + <0x0 0x00520 0x0 0x14>, + <0x0 0x00430 0x0 0x40>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_periphs 0 10 101>; + }; + + emmc_pins: emmc { + mux { + groups = "emmc_nand_d07", + "emmc_cmd", + "emmc_clk", + "emmc_ds"; + function = "emmc"; + }; + }; + + nor_pins: nor { + mux { + groups = "nor_d", + "nor_q", + "nor_c", + "nor_cs"; + function = "nor"; + }; + }; + + spi_pins: spi { + mux { + groups = "spi_miso", + "spi_mosi", + "spi_sclk"; + function = "spi"; + }; + }; + + spi_ss0_pins: spi-ss0 { + mux { + groups = "spi_ss0"; + function = "spi"; + }; + }; + + sdcard_pins: sdcard { + mux { + groups = "sdcard_d0", + "sdcard_d1", + "sdcard_d2", + "sdcard_d3", + "sdcard_cmd", + "sdcard_clk"; + function = "sdcard"; + }; + }; + + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_cmd", + "sdio_clk"; + function = "sdio"; + }; + }; + + sdio_irq_pins: sdio_irq { + mux { + groups = "sdio_irq"; + function = "sdio"; + }; + }; + + uart_a_pins: uart_a { + mux { + groups = "uart_tx_a", + "uart_rx_a"; + function = "uart_a"; + }; + }; + + uart_a_cts_rts_pins: uart_a_cts_rts { + mux { + groups = "uart_cts_a", + "uart_rts_a"; + function = "uart_a"; + }; + }; + + uart_b_pins: uart_b { + mux { + groups = "uart_tx_b", + "uart_rx_b"; + function = "uart_b"; + }; + }; + + uart_b_cts_rts_pins: uart_b_cts_rts { + mux { + groups = "uart_cts_b", + "uart_rts_b"; + function = "uart_b"; + }; + }; + + uart_c_pins: uart_c { + mux { + groups = "uart_tx_c", + "uart_rx_c"; + function = "uart_c"; + }; + }; + + uart_c_cts_rts_pins: uart_c_cts_rts { + mux { + groups = "uart_cts_c", + "uart_rts_c"; + function = "uart_c"; + }; + }; + + i2c_a_pins: i2c_a { + mux { + groups = "i2c_sck_a", + "i2c_sda_a"; + function = "i2c_a"; + }; + }; + + i2c_b_pins: i2c_b { + mux { + groups = "i2c_sck_b", + "i2c_sda_b"; + function = "i2c_b"; + }; + }; + + i2c_c_pins: i2c_c { + mux { + groups = "i2c_sck_c", + "i2c_sda_c"; + function = "i2c_c"; + }; + }; + + eth_pins: eth_c { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_clk_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_rxd2", + "eth_rxd3", + "eth_rgmii_tx_clk", + "eth_tx_en", + "eth_txd0", + "eth_txd1", + "eth_txd2", + "eth_txd3"; + function = "eth"; + }; + }; + + eth_link_led_pins: eth_link_led { + mux { + groups = "eth_link_led"; + function = "eth_led"; + }; + }; + + eth_act_led_pins: eth_act_led { + mux { + groups = "eth_act_led"; + function = "eth_led"; + }; + }; + + pwm_a_pins: pwm_a { + mux { + groups = "pwm_a"; + function = "pwm_a"; + }; + }; + + pwm_b_pins: pwm_b { + mux { + groups = "pwm_b"; + function = "pwm_b"; + }; + }; + + pwm_c_pins: pwm_c { + mux { + groups = "pwm_c"; + function = "pwm_c"; + }; + }; + + pwm_d_pins: pwm_d { + mux { + groups = "pwm_d"; + function = "pwm_d"; + }; + }; + + pwm_e_pins: pwm_e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + }; + }; + + pwm_f_clk_pins: pwm_f_clk { + mux { + groups = "pwm_f_clk"; + function = "pwm_f"; + }; + }; + + pwm_f_x_pins: pwm_f_x { + mux { + groups = "pwm_f_x"; + function = "pwm_f"; + }; + }; + + hdmi_hpd_pins: hdmi_hpd { + mux { + groups = "hdmi_hpd"; + function = "hdmi_hpd"; + }; + }; + + hdmi_i2c_pins: hdmi_i2c { + mux { + groups = "hdmi_sda", "hdmi_scl"; + function = "hdmi_i2c"; + }; + }; + + i2s_am_clk_pins: i2s_am_clk { + mux { + groups = "i2s_am_clk"; + function = "i2s_out"; + }; + }; + + i2s_out_ao_clk_pins: i2s_out_ao_clk { + mux { + groups = "i2s_out_ao_clk"; + function = "i2s_out"; + }; + }; + + i2s_out_lr_clk_pins: i2s_out_lr_clk { + mux { + groups = "i2s_out_lr_clk"; + function = "i2s_out"; + }; + }; + + i2s_out_ch01_pins: i2s_out_ch01 { + mux { + groups = "i2s_out_ch01"; + function = "i2s_out"; + }; + }; + i2sout_ch23_z_pins: i2sout_ch23_z { + mux { + groups = "i2sout_ch23_z"; + function = "i2s_out"; + }; + }; + + i2sout_ch45_z_pins: i2sout_ch45_z { + mux { + groups = "i2sout_ch45_z"; + function = "i2s_out"; + }; + }; + + i2sout_ch67_z_pins: i2sout_ch67_z { + mux { + groups = "i2sout_ch67_z"; + function = "i2s_out"; + }; + }; + + spdif_out_h_pins: spdif_out_ao_h { + mux { + groups = "spdif_out_h"; + function = "spdif_out"; + }; + }; + }; + + eth-phy-mux { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x55c 0x0 0x4>; + mux-mask = <0xffffffff>; + mdio-parent-bus = <&mdio0>; + + internal_mdio: mdio@e40908ff { + reg = <0xe40908ff>; + #address-cells = <1>; + #size-cells = <0>; + + internal_phy: ethernet-phy@8 { + compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22"; + reg = <8>; + max-speed = <100>; + }; + }; + + external_mdio: mdio@2009087f { + reg = <0x2009087f>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&saradc { + compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc"; + clocks = <&xtal>, + <&clkc CLKID_SAR_ADC>, + <&clkc CLKID_SANA>, + <&clkc CLKID_SAR_ADC_CLK>, + <&clkc CLKID_SAR_ADC_SEL>; + clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel"; +}; + +&sd_emmc_a { + clocks = <&clkc CLKID_SD_EMMC_A>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; + +&sd_emmc_b { + clocks = <&clkc CLKID_SD_EMMC_B>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; + +&sd_emmc_c { + clocks = <&clkc CLKID_SD_EMMC_C>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; + +&spicc { + clocks = <&clkc CLKID_SPICC>; + clock-names = "core"; + resets = <&reset RESET_PERIPHS_SPICC>; + num-cs = <1>; +}; + +&spifc { + clocks = <&clkc CLKID_SPI>; +}; + +&vpu { + compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; +}; diff --git a/include/dt-bindings/gpio/meson-gxl-gpio.h b/include/dt-bindings/gpio/meson-gxl-gpio.h new file mode 100644 index 0000000000..684d0d7add --- /dev/null +++ b/include/dt-bindings/gpio/meson-gxl-gpio.h @@ -0,0 +1,131 @@ +/* + * GPIO definitions for Amlogic Meson GXL SoCs + * + * Copyright (C) 2016 Endless Mobile, Inc. + * Author: Carlo Caione + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef _DT_BINDINGS_MESON_GXL_GPIO_H +#define _DT_BINDINGS_MESON_GXL_GPIO_H + +#define GPIOAO_0 0 +#define GPIOAO_1 1 +#define GPIOAO_2 2 +#define GPIOAO_3 3 +#define GPIOAO_4 4 +#define GPIOAO_5 5 +#define GPIOAO_6 6 +#define GPIOAO_7 7 +#define GPIOAO_8 8 +#define GPIOAO_9 9 + +#define GPIOZ_0 0 +#define GPIOZ_1 1 +#define GPIOZ_2 2 +#define GPIOZ_3 3 +#define GPIOZ_4 4 +#define GPIOZ_5 5 +#define GPIOZ_6 6 +#define GPIOZ_7 7 +#define GPIOZ_8 8 +#define GPIOZ_9 9 +#define GPIOZ_10 10 +#define GPIOZ_11 11 +#define GPIOZ_12 12 +#define GPIOZ_13 13 +#define GPIOZ_14 14 +#define GPIOZ_15 15 +#define GPIOH_0 16 +#define GPIOH_1 17 +#define GPIOH_2 18 +#define GPIOH_3 19 +#define GPIOH_4 20 +#define GPIOH_5 21 +#define GPIOH_6 22 +#define GPIOH_7 23 +#define GPIOH_8 24 +#define GPIOH_9 25 +#define BOOT_0 26 +#define BOOT_1 27 +#define BOOT_2 28 +#define BOOT_3 29 +#define BOOT_4 30 +#define BOOT_5 31 +#define BOOT_6 32 +#define BOOT_7 33 +#define BOOT_8 34 +#define BOOT_9 35 +#define BOOT_10 36 +#define BOOT_11 37 +#define BOOT_12 38 +#define BOOT_13 39 +#define BOOT_14 40 +#define BOOT_15 41 +#define CARD_0 42 +#define CARD_1 43 +#define CARD_2 44 +#define CARD_3 45 +#define CARD_4 46 +#define CARD_5 47 +#define CARD_6 48 +#define GPIODV_0 49 +#define GPIODV_1 50 +#define GPIODV_2 51 +#define GPIODV_3 52 +#define GPIODV_4 53 +#define GPIODV_5 54 +#define GPIODV_6 55 +#define GPIODV_7 56 +#define GPIODV_8 57 +#define GPIODV_9 58 +#define GPIODV_10 59 +#define GPIODV_11 60 +#define GPIODV_12 61 +#define GPIODV_13 62 +#define GPIODV_14 63 +#define GPIODV_15 64 +#define GPIODV_16 65 +#define GPIODV_17 66 +#define GPIODV_18 67 +#define GPIODV_19 68 +#define GPIODV_20 69 +#define GPIODV_21 70 +#define GPIODV_22 71 +#define GPIODV_23 72 +#define GPIODV_24 73 +#define GPIODV_25 74 +#define GPIODV_26 75 +#define GPIODV_27 76 +#define GPIODV_28 77 +#define GPIODV_29 78 +#define GPIOX_0 79 +#define GPIOX_1 80 +#define GPIOX_2 81 +#define GPIOX_3 82 +#define GPIOX_4 83 +#define GPIOX_5 84 +#define GPIOX_6 85 +#define GPIOX_7 86 +#define GPIOX_8 87 +#define GPIOX_9 88 +#define GPIOX_10 89 +#define GPIOX_11 90 +#define GPIOX_12 91 +#define GPIOX_13 92 +#define GPIOX_14 93 +#define GPIOX_15 94 +#define GPIOX_16 95 +#define GPIOX_17 96 +#define GPIOX_18 97 +#define GPIOCLK_0 98 +#define GPIOCLK_1 99 +#define GPIO_TEST_N 100 + +#endif