From: Tom Rini Date: Fri, 2 Dec 2022 21:42:50 +0000 (-0500) Subject: nxp: Rename CONFIG_U_BOOT_HDR_SIZE to FSL_U_BOOT_HDR_SIZE X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=46df77669ec4d8f04b0faf770d661f79971775a6;p=u-boot.git nxp: Rename CONFIG_U_BOOT_HDR_SIZE to FSL_U_BOOT_HDR_SIZE This is always defined to 16K, so we move this over to include/fsl_validate.h to start with. Next, we rename this from CONFIG_ to FSL_. Coalesce the various comments around this definition to be in fsl_validate.h as well to explain the usage. Signed-off-by: Tom Rini --- diff --git a/board/freescale/common/fsl_chain_of_trust.c b/board/freescale/common/fsl_chain_of_trust.c index 9ca350ed46..029d06bbf9 100644 --- a/board/freescale/common/fsl_chain_of_trust.c +++ b/board/freescale/common/fsl_chain_of_trust.c @@ -143,7 +143,7 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) (image_entry_noargs_t)(unsigned long)spl_image->entry_point; hdr_addr = (spl_image->entry_point + spl_image->size - - CONFIG_U_BOOT_HDR_SIZE); + FSL_U_BOOT_HDR_SIZE); spl_validate_uboot(hdr_addr, (uintptr_t)spl_image->entry_point); /* * In case of failure in validation, spl_validate_uboot would diff --git a/drivers/mtd/nand/raw/fsl_ifc_spl.c b/drivers/mtd/nand/raw/fsl_ifc_spl.c index 3b464ce10c..60a865b566 100644 --- a/drivers/mtd/nand/raw/fsl_ifc_spl.c +++ b/drivers/mtd/nand/raw/fsl_ifc_spl.c @@ -278,11 +278,11 @@ void nand_boot(void) * U-Boot header is appended at end of U-boot image, so * calculate U-boot header address using U-boot header size. */ -#define CONFIG_U_BOOT_HDR_ADDR \ +#define FSL_U_BOOT_HDR_ADDR \ ((CFG_SYS_NAND_U_BOOT_START + \ CFG_SYS_NAND_U_BOOT_SIZE) - \ - CONFIG_U_BOOT_HDR_SIZE) - spl_validate_uboot(CONFIG_U_BOOT_HDR_ADDR, + FSL_U_BOOT_HDR_SIZE) + spl_validate_uboot(FSL_U_BOOT_HDR_ADDR, CFG_SYS_NAND_U_BOOT_START); /* * In case of failure in validation, spl_validate_uboot would diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 5bdc2105f5..7a5bf937e4 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -20,13 +20,7 @@ #ifdef CONFIG_MTD_RAW_NAND #ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. - */ -#define CFG_SYS_NAND_U_BOOT_SIZE ((768 << 10) + \ - CONFIG_U_BOOT_HDR_SIZE) +#define CFG_SYS_NAND_U_BOOT_SIZE ((768 << 10) + (16 << 10)) #else #define CFG_SYS_NAND_U_BOOT_SIZE (768 << 10) #endif diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h index 5612c60ae9..b15c4a238b 100644 --- a/include/configs/ls1021atsn.h +++ b/include/configs/ls1021atsn.h @@ -38,21 +38,6 @@ #define SDRAM_CFG2_FRC_SR 0x80000000 #define SDRAM_CFG_BI 0x00000001 -#ifdef CONFIG_SD_BOOT -#ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -#endif /* ifdef CONFIG_NXP_ESBC */ - -#ifdef CONFIG_U_BOOT_HDR_SIZE -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw U-Boot image instead of FIT image. - */ -#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ -#endif - #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 281b26fa2b..9b22a2db21 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -37,25 +37,6 @@ #define SDRAM_CFG2_FRC_SR 0x80000000 #define SDRAM_CFG_BI 0x00000001 -#ifdef CONFIG_SD_BOOT -#ifdef CONFIG_NXP_ESBC -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. - */ -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -#endif /* ifdef CONFIG_NXP_ESBC */ - -#ifdef CONFIG_U_BOOT_HDR_SIZE -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ -#endif - #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index d0380b3373..685e7e65d1 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -41,37 +41,10 @@ /* Serial Port */ #define CFG_SYS_NS16550_CLK (get_serial_clock()) -/* SD boot SPL */ -#ifdef CONFIG_SD_BOOT -#ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#endif /* ifdef CONFIG_NXP_ESBC */ -#endif - /* NAND SPL */ #ifdef CONFIG_NAND_BOOT #define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE #define CFG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE - -#ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -#endif /* ifdef CONFIG_NXP_ESBC */ - -#ifdef CONFIG_U_BOOT_HDR_SIZE -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ - #endif /* GPIO */ diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 250891e9e3..ae9dc0c73b 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -41,19 +41,6 @@ /* Serial Port */ #define CFG_SYS_NS16550_CLK (get_serial_clock()) -/* SD boot SPL */ -#ifdef CONFIG_SD_BOOT -#ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#endif /* ifdef CONFIG_NXP_ESBC */ -#endif - /* NAND SPL */ #ifdef CONFIG_NAND_BOOT #define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index bcba8d81c0..86c5d48c0d 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -133,17 +133,4 @@ unsigned long long get_qixis_addr(void); " 0x580e00000 \0" #endif -#ifdef CONFIG_SPL -#ifdef CONFIG_NXP_ESBC -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#endif /* ifdef CONFIG_NXP_ESBC */ - -#endif - #endif /* __LS1088_COMMON_H */ diff --git a/include/fsl_validate.h b/include/fsl_validate.h index 252d499e7b..fbcbd42496 100644 --- a/include/fsl_validate.h +++ b/include/fsl_validate.h @@ -280,4 +280,11 @@ int fsl_setenv_chain_of_trust(void); * Architecture header (appended to U-boot image). */ void spl_validate_uboot(uint32_t hdr_addr, uintptr_t img_addr); + +/* + * This header is appended at end of image and copied to DDR along + * with the U-Boot image and later used as part of the validation + * flow + */ +#define FSL_U_BOOT_HDR_SIZE (16 << 10) #endif