From: Andrew F. Davis Date: Fri, 12 Apr 2019 16:54:42 +0000 (-0400) Subject: arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=407a219261ecb949ff0048b7854861c0948e3ac5;p=u-boot.git arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded On HS devices the 512b region of reset isolated memory called MCU_PSRAM0 is firewalled by default. Until SYSFW is loaded we cannot use this memory. It is only used to store a single value left at the end of SRAM by ROM that will be needed later. Save that value to a global variable stored in the .data section. This section is used as .bss will be cleared between saving this value and using it. Signed-off-by: Andrew F. Davis Reviewed-by: Andreas Dannenberg Reviewed-by: Lokesh Vutla --- diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c index 77cd15f388..60a580305d 100644 --- a/arch/arm/mach-k3/am6_init.c +++ b/arch/arm/mach-k3/am6_init.c @@ -49,11 +49,16 @@ static void ctrl_mmr_unlock(void) mmr_unlock(CTRL_MMR0_BASE, 7); } +/* + * This uninitialized global variable would normal end up in the .bss section, + * but the .bss is cleared between writing and reading this variable, so move + * it to the .data section. + */ +u32 bootindex __attribute__((section(".data"))); + static void store_boot_index_from_rom(void) { - u32 *boot_index = (u32 *)K3_BOOT_PARAM_TABLE_INDEX_VAL; - - *boot_index = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX); + bootindex = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX); } void board_init_f(ulong dummy) @@ -92,7 +97,6 @@ u32 spl_boot_mode(const u32 boot_device) { #if defined(CONFIG_SUPPORT_EMMC_BOOT) u32 devstat = readl(CTRLMMR_MAIN_DEVSTAT); - u32 bootindex = readl(K3_BOOT_PARAM_TABLE_INDEX_VAL); u32 bootmode = (devstat & CTRLMMR_MAIN_DEVSTAT_BOOTMODE_MASK) >> CTRLMMR_MAIN_DEVSTAT_BOOTMODE_SHIFT; @@ -168,7 +172,6 @@ static u32 __get_primary_bootmedia(u32 devstat) u32 spl_boot_device(void) { u32 devstat = readl(CTRLMMR_MAIN_DEVSTAT); - u32 bootindex = readl(K3_BOOT_PARAM_TABLE_INDEX_VAL); if (bootindex == K3_PRIMARY_BOOTMODE) return __get_primary_bootmedia(devstat); diff --git a/arch/arm/mach-k3/include/mach/am6_hardware.h b/arch/arm/mach-k3/include/mach/am6_hardware.h index b5244609af..3343233aa3 100644 --- a/arch/arm/mach-k3/include/mach/am6_hardware.h +++ b/arch/arm/mach-k3/include/mach/am6_hardware.h @@ -44,7 +44,4 @@ #define CTRLMMR_LOCK_KICK1 0x0100c #define CTRLMMR_LOCK_KICK1_UNLOCK_VAL 0xd172bc5a -/* MCU SCRATCHPAD usage */ -#define K3_BOOT_PARAM_TABLE_INDEX_VAL CONFIG_SYS_K3_MCU_SCRATCHPAD_BASE - #endif /* __ASM_ARCH_AM6_HARDWARE_H */