From: Fabio Estevam Date: Wed, 11 Dec 2019 13:49:30 +0000 (-0300) Subject: imx8mq_evk: Update the required ATF branch X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=3b5aefac569dcf53152eebae9cf419ecd9ac76f0;p=u-boot.git imx8mq_evk: Update the required ATF branch Following the README instructions leads to a non-booting U-Boot: U-Boot SPL 2020.01-rc3-00070-g9a0cbae22a (Nov 25 2019 - 13:08:24 -0300) PMIC: PFUZE100 ID=0x10 DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Trying to boot from MMC2 (It hangs here) Use the "imx_4.19.35_1.0.0" ATF branch instead, which fixes such problem and allow the boot to complete again. Suggested-by: Adam Ford Signed-off-by: Fabio Estevam Acked-by: Peng Fan --- diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README index c1d400bcf9..4f671b069c 100644 --- a/board/freescale/imx8mq_evk/README +++ b/board/freescale/imx8mq_evk/README @@ -11,7 +11,7 @@ Get and Build the ARM Trusted firmware ====================================== Note: srctree is U-Boot source directory Get ATF from: https://source.codeaurora.org/external/imx/imx-atf -branch: imx_4.14.62_1.0.0_beta +branch: imx_4.19.35_1.0.0 $ make PLAT=imx8mq bl31 $ cp build/imx8mq/release/bl31.bin $(srctree)