From: Michael Walle Date: Thu, 11 Apr 2019 13:36:21 +0000 (+0200) Subject: arm: kirkwood: lsxl: add note about sata in README X-Git-Url: http://git.dujemihanovic.xyz/login.html?a=commitdiff_plain;h=30387ee292f04b039d6bd0922e90402c61fa7a21;p=u-boot.git arm: kirkwood: lsxl: add note about sata in README The boot commands have changed in the environment. Add a note about the incompatible change and how resolve the issue in the board's README. Signed-off-by: Michael Walle Reviewed-by: Stefan Roese Signed-off-by: Stefan Roese --- diff --git a/board/buffalo/lsxl/README b/board/buffalo/lsxl/README index ef5ed42880..fffb1ce8ec 100644 --- a/board/buffalo/lsxl/README +++ b/board/buffalo/lsxl/README @@ -8,6 +8,16 @@ the LS-XHL PCB has two SDRAM chips. Both have a Kirkwood CPU (Marvell bootloader and its environment. The linux kernel and the initial ramdisk are loaded from the hard disk. +Important! Changes since v2019.07 +--------------------------------- +In u-boot v2019.07 the driver for the SATA port was changed to a new +one. This means that the old "ide" command and block interface is not +supported anymore. More important, the boot commands have changed. You have +to overwrite the boot commands in your envionment with the new ones: + + env default -f bootcmd_legacy + env default -f bootcmd_hdd + saveenv Rescue Mode -----------